[RBW] Re: May be a dumb question but if you've shortened your bars once can you do it again?

It may be the width of the bar not the length of the sweep. Wider bars increase steering response. More twitchy. On Tuesday, November 21, 2017 at 11:47:33 AM UTC-5, Ryan Fleming wrote: > > This is about my Choco-norm bars on my mixte > > Mark at RBW chopped about 15mm or so off the ends. I still

[RBW] Re: May be a dumb question but if you've shortened your bars once can you do it again?

ill stylin :) > > > > On Tuesday, November 21, 2017 at 12:51:54 PM UTC-6, Les Lammers wrote: >> >> Ryan, >> >> FWIW, I've had a hard time getting the bars 'right' for me on my Cheviot. >> *I* never could get comfortable with the Choco Norm

[RBW] Re: May be a dumb question but if you've shortened your bars once can you do it again?

Ryan, FWIW, I've had a hard time getting the bars 'right' for me on my Cheviot. *I* never could get comfortable with the Choco Norm bar. I stumbled on this http://zedmartinez.com/2016/06/rivendell-clem-smith-jr/ Perhaps it will help. I got Bosco bars and am setting them up as in the article. Go

[RBW] Re: FS Brand New Lugged S84 Seatpost

I seem to have the same issue with my Cheviot. I have some Albatross bars I'd like to use but a bar end shifter is stuck is one side and nothing I've tried so far will budge it. I may trim the bars a bit and see if that helps. On Monday, September 11, 2017 at 2:26:35 PM UTC-4, Ryan Fleming wrot

[RBW] Re: Help from coastal riders: how to deal with sand?

+1 on the wax lube. :-) On Sunday, August 27, 2017 at 11:20:43 PM UTC-4, Ron Mc wrote: > I don't ride the beach, but rI ride a lot of wet grit. I use Wippermann > stainless chains and wax lube (Molten Speed Wax, and extend it with White > Lightning Clean Ride) - nothing sticks to it. > Befor

[RBW] Re: Appaloosa Beach Build

On Tuesday, August 22, 2017 at 12:04:49 AM UTC-4, Ann L wrote: > > Carla: thank you! > > Bill: thank you :) I used bar wrap left over from another handlebar > project. Although I like the how the harlequin wrap turned out, I'm not > crazy about the color. It looks better in bright sunlight

[RBW] Re: Appaloosa Beach Build

Congrats! Listen...can you hear your therapist ask to be taken to New Orleans? I think I hear it. :-) While there, go to Drago's Seafood Restaurant. You'll be glad you did. On Monday, August 21, 2017 at 10:24:31 AM UTC-4, Ann L wrote: > The back story: five years ago, RBW built my Soma San M

[RBW] Re: How do you guys do it, buying a bike sight unseen

+1 *If you are short armed/trunked, and ride drops, you may want to size down one size if the frame sizes are close. If you will be upright riding, then just stick with RBW sizing methods. *Excellent advice. On Monday, August 14, 2017 at 6:43:30 PM UTC-4, lum gim fong wrote: > I've had 4 Riven

[RBW] Re: Saluki Links

Too bad that the Bleriot project did not work out. A lot more folks would be really enjoying cycling if it did. On Tuesday, August 8, 2017 at 11:44:13 AM UTC-4, rob markwardt wrote: > Here's the country bike article. > > On Tuesday, August 8, 2017 at 8:41:23 AM UTC-7, rob markwardt wrote: >>

[RBW] Re: Roadini Sizes

On Monday, August 7, 2017 at 9:30:43 AM UTC-4, Jay Connolly wrote: > > *I'm not going to buy one*, but does anybody understand what the Roadini > frame sizes actually are? One of the pics on the site says it's of a 63. > Earlier--months ago--the bike was described as coming in a 62. I believe >

[RBW] Re: Let's Talk Fenders...

Thanks Jon. I just got them for my Cheviot in silver from Ben's Cycles via Amazon for $47.99 shipped. On Sunday, July 30, 2017 at 9:49:28 PM UTC-4, Jon BALER wrote: > Planet bike now has aluminum fenders, which are easy to install. They go > by 'alx' and come in silver in 65mm -- You receive

[RBW] Re: why so many joe's up for sale?

I thought the LHT was sort of an Atlantis copy? On Thursday, August 3, 2017 at 1:55:24 PM UTC-4, Stuart Lovinggood wrote: > A lot, maybe not most, of people buy Rivs sight unseen. And because most > people have only ever ridden bikes with shorter wheelbases, it's not > necessarily clear exactly

Re: [RBW] Saluki Links

On Wednesday, August 2, 2017 at 8:36:20 PM UTC-4, Bill Lindsay wrote: > > Cyclofiend's Bleriot page includes a Rivendell comparison between the > Bleriot and the Saluki > > http://www.cyclofiend.com/rbw/bleriot/index.html > > Cyclofiend's Hilsen page includes a Rivendell comparison between the >

Re: [RBW] Re: Terrific Writeup on the origins of Rivendell by Jan Heine

I'll add that the Cheviot, for a cruiser, is no slug either. On Tuesday, July 25, 2017 at 3:50:58 PM UTC-4, Chris Birkenmaier wrote: > I certainly get what you are saying Joe about the "cruisers" versus the > "road" type of bikes. I just would add that my Joe Appaloosa is far > livelier than w

[RBW] Re: WTB: MAP Ahearne bar (via Jay's Choco Norm vs Albas post)

I have MAP Ahearne bars with Ergon cork grips on my Cheviot and like them a lot. My L'avecaise frame has arrived and I'm planning to use Nitto Fairweather bars, like the Noodle but with less drop. But the MAP Ahearne may end up there too. You will need a shorter stem though. On Friday, July 1

Re: [RBW] Choco norm vs Albas

Bars are personal things. I tried the Choko norm on a Cheviot, my first non-drop bar bike, but prefer map/ahearne bars. The Chocko were like driving a tractor. Also, I did not like the hand position. On Friday, July 14, 2017 at 3:52:29 AM UTC-4, ed wrote: > Same here. > I used Albas for my tran

[RBW] Re: FS: 51 cm Sam Hillborne $2500 (SF Bay)

Borrow some $$ for the honeymoon and keep the bike. On Friday, June 23, 2017 at 11:52:22 AM UTC-4, Stanley Withouski wrote: > Practically brand new Sam Hillborne - custom built from the frame on up. > Less than 500 miles. Need honeymoon funds. Prefer to sell complete. > CL ad here: https://sfba

[RBW] Re: Platform Pedal Recommendation for Sam

On Monday, June 12, 2017 at 8:27:33 PM UTC-4, Kurt Manley wrote: > > I have size 13 feet and the MKS sneaker pedals always felt great to me. > They are $30 from Riv so they're within your budget and you can also > support Riv. > > I do really like the VP pedals too, *there's plastic ones that f

Re: [Ext] [RBW] Re: New Riv Model - Newsletter

On Saturday, June 10, 2017 at 6:20:51 PM UTC-4, dstein wrote: > > Bill - how many rivendell's do you own now?!?! Can I have a couple ;) > > *I don't get the appeal of the upright mountain mixte.* I guess it > doesn't have to be upright, but they usually seem to be setup w/ albatross > bars. To b

[RBW] Re: Atlantis vs Appaloosa

I'm 65 and officially old. I have a 55cm Chevoit and labored over the purchase decision. It's very comfortable ride and extremely stable. You can ride and let your mind wander w/o worry long as you aren't doing rough stuff. Fine on 'normal' trails. I perhaps would have preferred geometry more l

[RBW] Re: On downsizing (and the 1 bike, and 650b)

On Tuesday, May 30, 2017 at 1:45:24 AM UTC-4, drew wrote: > > I don't think keeping both is in the cards, at least not for the long > haul. I could hold out, but eventually the Sam is gonna go. > > *Hunq in the city is comfy and fun, but can be hard to keep up with > friends on roadier bikes. Bi

[RBW] Re: Atlantis vs Appaloosa

I agree with Bill 100%. Just put a few dollars away until you can make it happen. IMHO, long term satisfaction should be the goal. On Monday, August 22, 2016 at 2:10:07 PM UTC-4, Bill Lindsay wrote: > In my opinion, if you really want an Atlantis, you should wait and make it > happen. If "o

[RBW] Re: Handlebar Bliss

I have the Ahearne Map bar set up like your. I'm thinking about the IRD stem shifter to get more hand position flexibility. Great bars. On Tuesday, May 16, 2017 at 9:44:43 AM UTC-4, Ron Mc wrote: > I'll add in here, I've never tried an Alba, but I've never had a bike with > a top tube long enoug

[RBW] Re: Handlebar Bliss

Before changing bars you may want to consider a dirt drop stem. It will get the bars up higher than a 'normal' stem. On Monday, May 15, 2017 at 7:09:14 AM UTC-4, Broccoli Cog wrote: > Thanks for the feedback. I have Noodles on my Sam set slightly above > saddle height. I can't say enough about

[RBW] Re: Compass on tour?

I use these: https://www.youtube.com/watch?v=Ostb6ysNce4 25 grams On Monday, May 1, 2017 at 10:21:48 AM UTC-4, Tim wrote: > So, I absolutely love my Compass Barlow Pass extra light, 700x38s on my > Hilsen. I've been riding them for 2-2 1/2 years. I'm planning on riding > from KC to Phoenix in a

[RBW] Re: New Chev

Cool painting! I simply zip tied the basket to a Nitto M18 and scrapped the Wald struts. Very solid On Thursday, May 4, 2017 at 2:53:13 PM UTC-4, Antone Könst wrote: > Got my dream frame, 60 orange chevy, from Clayton a few weeks ago. He did > a great job packing and shipping BTW> > > Been rid

[RBW] Re: Compass on tour?

I agree with Doug and would get some bullet proof tires. On Monday, May 1, 2017 at 11:35:53 AM UTC-4, dougP wrote: > I'll take the other side of the argument on this one. While light supple > tires perform well riding unloaded, on a long tour in the summer, with > 25-30 lbs of gear, expect

Re: [RBW] Re: 3M helicopter tape

is it way too expensive to buy as a roll? There >>> seem to be a few eBay sellers but I noticed they're selling strips not >>> rolls. As other's have mentioned there other manufacturer's. I myself >>> consider 3m to be of the highest quality. Also wha

[RBW] Re: 3M helicopter tape

all found to be the > most useful? > > ~Hugh > > On Friday, April 7, 2017 at 2:38:43 AM UTC-7, Les Lammers wrote: >> >> This was developed for the leading edge of copter blades to prevent >> abrasion from desert sand. It's a TOUGH clear adhesive tape available in

[RBW] Re: 3M helicopter tape

A piece of cotton handlebar tape works well. On Friday, April 14, 2017 at 2:56:35 PM UTC-4, Ash A wrote: > > I was considering this tape to protect the frame from front derailleur > clamp. > > Or is there a better way to pad the FD clamp? > > > > On Friday, 7 Apr

[RBW] Re: New bike--Joe Appaloosa

Very nice! It always takes me a while to dial a new bike in. Use some http://www.obenaufs.com/Heavy-Duty-LP-8-oz-p/heavy-duty-lp-8.htm on the saddle and leave it in the sun a while. On Monday, April 17, 2017 at 4:57:37 PM UTC-4, REC wrote: > Thanks again. My sits-bones are OK today; I'm used

Re: [RBW] Re: 3M helicopter tape

It does nothing to the paint. The same material is sold as Invisabra for automotive use. On Friday, April 7, 2017 at 1:51:24 PM UTC-4, Steve Palincsar wrote: > And what, if anything does it do to the paint underneath? > > > On 04/07/2017 10:24 AM, George Schick wrote: > > This is good to know

[RBW] Re: 3M helicopter tape

It comes off easily. There are 1" and 2" strips on ebay. On Friday, April 7, 2017 at 10:24:02 AM UTC-4, George Schick wrote: > This is good to know - I've been looking for something like this for chain > slap protection. It's gosh awful expensive, though, so it's good to know > that you can bu

[RBW] 3M helicopter tape

This was developed for the leading edge of copter blades to prevent abrasion from desert sand. It's a TOUGH clear adhesive tape available in different widths.You can find it on the auction site. I have it on the 'top tube' of my Cheviot and also use it as a chainstay protector. Excellent paint

[RBW] Re: Rosco Bubbe Mixte

Looks great. I'm using the same tires with Panaracer Kevlar liners on a Cheviot. On Wednesday, April 5, 2017 at 7:40:36 PM UTC-4, Steve Butcher wrote: > The* tires are Panaracer T-serve Messenger 650b x 42c.* The fenders are > SKS Longboard 50's. > > On Tuesday, April 4, 2017 at 5:53:18 PM

[RBW] Re: Iron on patches

What handlebars are you using? They look interesting. On Wednesday, March 29, 2017 at 1:11:28 PM UTC-4, Clayton wrote: > > > > >

[RBW] Re: Car Bike Rack

I'd try a quality hitch adapter first. The extra few inches of overhang will not be an issue. On Tuesday, March 28, 2017 at 10:20:52 AM UTC-4, William R. wrote: > Thanks for sharing Leah. This Saris looks like it would be a good rack for > my situation. I am currently experiencing a car rack co

[RBW] Re: Advice on Choosing a New Rivendell Appaloosa, Hillborne or Clem

Take a road trip to Riv and do some demo rides. It's not that far from Oregon. :-) On Thursday, March 23, 2017 at 11:35:57 AM UTC-4, Jonathan Donehower wrote: > > This is my first post. I have been commuting regularly now for over a > year and ready to buy a new bike with my wife's support. We

Re: [RBW] Re: Clem L (low bar) for longer rides?

Excellent idea. You will then know what will work best for you. The most important thing is proper fit. On Tuesday, March 21, 2017 at 8:15:25 PM UTC-4, Roberta wrote: > > Thank you all! *I think I'll need to go to "local" RIV reseller and ride > some.* > > I have two bikes, both early 1990 hyb

[RBW] Re: Clem L (low bar) for longer rides?

A Cheviot or Clem L would be fine for the riding you want to do. There are many handlebars to choose from that are not too upright. What are you riding now? On Monday, March 20, 2017 at 8:09:19 PM UTC-4, Roberta wrote: > > For those of you who own this, how do you feel about Clem for longer > "

[RBW] Re: New to Me Bleriot as Road Bike

Looks great Derek and I'm glad you are enjoying it. Here are some bars to consider. Like Noodles but less drop. https://www.tokyobike.com.au/buy-accessories/nitto-fairweather-drop-handlebar Unfortunately, they are not sold in the USA. On Wednesday, March 15, 2017 at 10:24:49 AM UTC-4, Derek La

[RBW] Re: PSA: 55cm Gray Cheviot. Like New.

+1 That is a great deal on a fine bike. A month after you buy it you will be glad you did. On Saturday, March 11, 2017 at 10:07:04 PM UTC-5, Michael Morrissey wrote: > > You should have bought it! Have you checked out 718 Cycles for their Rivs? > Also have you checked out Nomad Cycles here in Q

[RBW] Re: Feb 24th Century Ride on the Sam Hillborne

Dan, You forgot to mention that you did the ride the day before you left for Mardi Gras. :-) On Wednesday, March 8, 2017 at 12:25:42 PM UTC-5, Daniel Betancourt wrote: > I finished my first Century ride after around 2 months of preparation. I'm > including a few pics of the ride below. I took

[RBW] Re: Atlantis now redundant?

It's just nice to have choices. :-) On Wednesday, March 1, 2017 at 11:07:18 PM UTC-5, Reid wrote: > > Just read the latest Blug that goes on about the Appaloosa. Seems to make > the case that the Appaloosa is better for touring in many cases than the > Atlantis, and better for a wider variety of

[RBW] Re: Remember Good People, Steel is Real!

I thought I was the only one that did that. ;-) On Tuesday, March 7, 2017 at 1:29:27 PM UTC-5, Wayne Naha wrote: > > From the comments "don't trust a frame you bake in an oven" Still, I > think my Clem would have bounced back after that, but we'll never know > because shenanigans like that are

[RBW] Re: FS-Joe Appaloosa

The MAP bars may be a great solution. I have them on my Cheviot with Ergon CG-1 grips and like them a lot. On Monday, February 27, 2017 at 12:05:40 PM UTC-5, Gossamer wrote: > > You offer an interesting solution and I'll seriously consider it. My issue > is that I think the bars need to come bac

Re: [RBW] Re: Cheviot touring?

I have one of these for my Chevoit, https://www.topeak.com/global/en/products/accessories/332-cagemount On Saturday, February 25, 2017 at 7:58:35 AM UTC-5, Steve Palincsar wrote: > > > > On 02/24/2017 10:27 PM, Patrick Moore wrote: > > FWIW, I tried a 2-fish, velcro, strap-on cage on the down

[RBW] Re: PSA: (pricey?) 54cm Quickbeam on eBay

Enjoy it. It looks like it has seen little use. On Tuesday, February 21, 2017 at 8:32:25 PM UTC-5, Chris Birkenmaier wrote: > > Well I will step forward and admit I bought this bike. I had already been > watching it when this thread started and later had an offer in when it was > being discuss

[RBW] Re: PSA: (pricey?) 54cm Quickbeam on eBay

Make an offer that suits you. From reading the description it seems like the seller picked it up and is flipping it. It does look very clean. On Saturday, February 18, 2017 at 5:03:20 PM UTC-5, Geeter wrote: > > I've been on the hunt as well and I would say that is surely on the high > end of pr

[RBW] Re: Your S24O tent recommendation

Here are the two person tents at Sierra Trading Post. Some have a 25% off coupon. http://www.sierratradingpost.com/s~tents/specdataor~sleep%20capacity!2-person/ On Wednesday, February 15, 2017 at 4:46:06 PM UTC-5, BenG wrote: > > Thanks, friends. "Riding there" is the new part of this for me. We

[RBW] Re: Glorius and Wilbury

IMHO, the now sold out Rosco B mixte would be more different compared to the Glorious and Chevoit. I have the new Cheviot with the long chain stays and it's a great riding bike. Perhaps be happy with what you have. :-) On Thursday, February 16, 2017 at 8:46:07 PM UTC-5, Chris Birkenmaier wrote:

[RBW] Re: And now, the annual Betty Foy Valentine thread!

Living on the edge with that tire. I have a Cheviut because I'm not manly enough for a Betty Foy. :-) On Wednesday, February 15, 2017 at 2:30:29 PM UTC-5, Ryan Fleming wrote: > > And you ARE the poster girl for mixtes! That rear tire is a definite sign > that the Bets is well-loved and well-us

[RBW] Re: WTB: Riv cheapy pedals

Joe, the VP Push N2 pedals are available online. I got 3 pairs for $61 shipped from Backcountry.com. Very nice pedals with sealed bearings and a nylon body. On Thursday, February 2, 2017 at 12:14:20 PM UTC-5, Joe Bernard wrote: > > Does anybody have take-offs from a complete CLEM or Appaloosa b

[RBW] Re: WTB: Riv cheapy pedals

You can find them on the auction site. They are serviceable. http://www.vpcomponents.com/product/vp-push-n2/ On Thursday, February 2, 2017 at 6:13:46 PM U

[RBW] Re: WTB: Riv cheapy pedals

You can find them on the auction site. They are serviceable, http://www.vpcomponents.com/product/vp-push-n2/ On Thursday, February 2, 2017 at 6:13:46 PM UTC-5, William R. wrote: > > Joe, the pedals that came on my Appaloosa are known as VP Push-N2 pedals. > I like them a lot and so bought 2 mor

[RBW] Re: ?Appaloosa versus Sam Hillborne

I'm 64 and have a Chevoit with the long chainstays that keep your heels away from rear bags. Very comfortable ride and it does not feel 'slow'. On Friday, February 3, 2017 at 4:15:15 PM UTC-5, mlpessar wrote: > > Guys, I have a good problem to have. I'm in the process of deciding > between an

[RBW] Re: F.S. 55cm Bleriot frame set

I really enjoyed the Bleriot and I did not know the Hetres would fit. On Thursday, January 26, 2017 at 3:03:20 PM UTC-5, jeffrey kane wrote: > > It's a great bike at a great price. > PBH 81.3 will fit fine (and man, that's such a specific measurement that I > don't even want to think about how y

[RBW] Re: F.S. 55cm Bleriot frame set

Sold to Derek Lawrence. Mr. Bleriot is relocating to Denver, On Monday, January 30, 2017 at 10:24:16 PM UTC-5, rob markwardt wrote: > > I've had my Bleriot for 10 years now and I doubt if it planes (it does > have a nice biplane though). It's more of a comfy do it all cruiser IMO > and I find t

Re: [RBW] FYI: Nitto Fairweather handle bars. Drop bars for riders that don't like drop bars

neck now likes the shallower drops, > compensated for with a bit more reach. (And the bar is now 1" instead of 3" > below saddle.) > > I've got Maes Parallels or clones on all my bikes except the folder. > > On Fri, Jan 27, 2017 at 12:25 PM, Les Lammers > wrote: &

Re: [RBW] FYI: Nitto Fairweather handle bars. Drop bars for riders that don't like drop bars

dles). > > On Thu, Jan 26, 2017 at 11:57 AM, Les Lammers > wrote: > >> >> <https://lh3.googleusercontent.com/-paidwsJLBGA/WIpGQ7EdLLI/ANQ/c4vvvRBr0DAGp9YZ0EIuraR0kgl5ZI2JQCLcB/s1600/hb.gif> >> >> >> <https://lh3.googleusercontent.com/-paidw

[RBW] Re: Nitto Noodles vs Soma Highway One Bars

I'm in Florida and ordered them from Japan. The bummer was that EMS was $43 but once the bars arrived I was smiling. I never used the drops with Noodle but will with these. :-) http://store.fairweather.cc/store/p26/MOD174_ALL_ROAD_BAR_by_NITTO.html On Friday, January 27, 2017 at 12:48:42 PM UT

Re: [RBW] FYI: Nitto Fairweather handle bars. Drop bars for riders that don't like drop bars

> I'm curious why these are more comfortable than the Noodles (I ask as > someone who himself has found bars more comfortable than the Noodles). > > On Thu, Jan 26, 2017 at 11:57 AM, Les Lammers > wrote: > >> >> <https://lh3.googleusercont

[RBW] Re: Spyshots of my custom mixte - happy days

Woo Hoo for you! Who says you have to grow up? I hope you can ride it a bit before spring. On Thursday, January 26, 2017 at 6:07:16 PM UTC-5, Ryan Fleming wrote: > > Update...no pix yet. My mixte arrived yesterday. That bike was sure > lovingly packed; I think you could have dropped that box fro

[RBW] FYI: Nitto Fairweather handle bars. Drop bars for riders that don't like drop bars

https://store.bluelug.com/feature/fairweather-h

[RBW] Re: F.S. 55cm Bleriot frame set

Derek, The stand over height is 79.4. There is a geometry chart in the post below this one. On Thursday, January 26, 2017 at 1:40:03 PM UTC-5, Derek Lawrence wrote: > Anyone have impressions of sizing on the Bleriot? I have PBH of 81.3. It > looks like 55 may be a bit big. > > > -- You recei

Re: [RBW] F.S. 55cm Bleriot frame set

On Thursday, January 26, 2017 at 11:58:30 AM UTC-5, Les Lammers wrote: > > My bad, > > I remember it as a budget Saluki. 650B and *I* think the max tire with > fenders is a 38mm. Link to geometry: > http://www.cyclofiend.com/rbw/geometry.html > > > > > > &g

[RBW] Re: Nitto Noodles vs Soma Highway One Bars

PG, I just received a pair of the 42 mm Fairweather bars from Japan. These are the bars that do it for me. I had 42cm Noodles. On Tuesday, January 17, 2017 at 7:38:58 PM UTC-5, PG wrote: > I have a 42 cm wide version of each, which I've traded back and forth on a > Soma San Marcos frame. > >

Re: [RBW] F.S. 55cm Bleriot frame set

ls in the Riv Hierarchy of Frames. 700c? > AAre the 559s extra? Fits a 35c? > > Thanks, > Patrick who is frameset shopping > On Thu, Jan 26, 2017 at 3:23 AM Les Lammers > wrote: > >> I'm offering my original owner 55cm Bleriot with Chris King head set, >>

[RBW] F.S. 55cm Bleriot frame set

I'm offering my original owner 55cm Bleriot with Chris King head set, Pletscher kickstand and SKS fenders. But wait there is more...a fresh bottle of Carol Hanson Marine Scene touch up nail polish. Your toe nails will match the frame and you can also touch up the chips shown in the photos. :-)

[RBW] Re: Favorite Front Racks and Baskets for All-Rounders/Atlantis/etc?

On Wednesday, January 25, 2017 at 12:55:45 AM UTC-5, GerBear wrote: > > Hello, looking to add a Wald basket for my AR. Anyone have any good > suggestions? I am more of a slow rider that likes toting six packs and > baguettes than goo kind of guy. > Cheers > I have a Nitto M18 and medium Wald

[RBW] Re: Legolas/Roadeo Owners: Threadless stem size vs quill

Howdy Jay, Maybe this will be helpful. http://yojimg.net/bike/web_tools/stem.php On Monday, January 23, 2017 at 2:17:33 PM UTC-5, Call Me Jay wrote: > I'm building up a 57cm Legolas soon with a threadless steerer. My 58cm > 650b Homer and second hand 57ish cm Custom has 90mm quill stems and No

[RBW] Re: Recommendation of a rear USB light or reflector that I can attach to the back of my Nitto R14 rear rack to cover those holes?

I have the B&M on the R-14. No complaints. On Tuesday, January 17, 2017 at 6:38:37 PM UTC-5, Daniel Betancourt wrote: > > Thanks for all the feedback. I ended up finding that "Busch & Muller > Toplight Line senso Bike Cycling Tail / Rear Red Light" on eBay and ordered > it from there. If they wo

Re: [RBW] Re: Spyshots of my custom mixte - happy days

ight, so I applaud them for that. > > Pretty much all that's missing from what I've seen so far is the saddle > and seatpost - B-17 Select and S-83 Nitto seatpost and some of those MKS > touring pedals > > > > On Sunday, January 8, 2017 at 6:49:51 AM UTC-6,

[RBW] Re: New Bike Day (Rosco Road 53cm)

Very nice! All of the Rosco frames are rather unique. On Monday, January 9, 2017 at 7:12:01 PM UTC-5, dstein wrote: > > In my never ending quest for a 700c road-ish bike (for my short ass at > 5'7") with drop bars and wide (over 33mm) tires I've finally landed on a > Rosco Bubbe road! I road the

[RBW] Re: Fenders installed. Rack moved to the front. Now to figure out if I bought the right sized basket & how to secure it.

Dan, I'm going to use zip ties but will put some strips of bamboo on the rack before securing it simply to prevent metal to metal contact. Still waiting for the rack. On Wednesday, January 11, 2017 at 8:41:45 AM UTC-5, Daniel Betancourt wrote: > Thanks for all the comments and feedback. > > Da

[RBW] Re: So what do I put in my tea now?

If you live long enough you will die from something. :-) On Friday, January 6, 2017 at 5:44:03 PM UTC-5, lum gim fong wrote: > > My question was partially a joke, as many people say not to consume > something or face the tragic consequences. > > Modern western nutrition advice is like a never end

[RBW] Re: Photos from 2012 Great Divide Mountain Bike Trail

DP, thanks for posting, Excellent photos and it looks like a great adventure. I was working in South Dakota and took a side trip to the Badla

Re: [RBW] Re: Spyshots of my custom mixte - happy days

Looks might fine Ryan! The Choco norm bars are quite nice. These look interesting too. https://www.rivbike.com/blogs/peeking-through-the-knothole/pneubar-pname On Wednesday, January 4, 2017 at 4:19:20 PM UTC-5, Ryan Fleming wrote: > > It is a beautiful colour...just as I envsioned and it'll look

[RBW] Re: New Sam Hillborne Finally Arrived

Looks great Dan-O! They are Choco Norm bars. On Wednesday, January 4, 2017 at 3:20:51 AM UTC-5, Daniel Betancourt wrote: > > Thanks. They're supposed to be Nitto Choco bars. > > On Wednesday, January 4, 2017 at 12:48:49 AM UTC-5, Ash A wrote: >> >> That's a nice color combination indeed! >> >> Cu

[RBW] Re: Silent bell until needed

This looks interesting: http://www.mtbbell.com/ On Wednesday, December 28, 2016 at 11:38:22 AM UTC-5, Deacon Patrick wrote: > > Bells are designed to reverberate. They take the vibration of a ride, even > when not intended to be rung, and “hum.” Anyone have suggestions for the > most silent, ste

[RBW] Re: FS: 60cm Cheviot Complete

Good. The therapy session is on the house. :-) rsday, December 29, 2016 at 3:50:36 PM UTC-5, Clayton.sf wrote: > yeah keeping it ;-) > > settled on steel vs ti ;-) > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this

[RBW] Re: NEW BIKE DAY!

Roaming free is better than the trainer. Enjoy the new ride! er 29, 2016 at 7:33:52 PM UTC-5, Kellie wrote: > > First ride outside (been on a trainer) since hand surgery. > > >

[RBW] Re: WTB: Nitto r14 rack

Not local, but I bought one from this seller and the shipping time was about a week. *I* like the rack. http://www.ebay.com/itm/Nitto-R14-Rear-Rack-/121680222093 On Wednesday, December 28, 2016 at 12:22:39 PM UTC-5, Kellie wrote: > > Looking for a Nitto rack local to the Bay Area. -- You recei

[RBW] Re: Multi Use Path Etiquette

I've had that happen on trails in Big Cypress and am considering one of these: http://www.mtbbell.com/ On Tuesday, December 27, 2016 at 9:30:53 PM UTC-5, Deacon Patrick wrote: > > The other day I had to negotiate MUP passage with an 8 point buck and his > does. We just watched each other for wh

[RBW] Re: FS: 60cm Cheviot Complete

As your Bike-o-Therapist I suggest you stop Jonesing and go for a ride on your Cheviot. :-) On Sunday, December 25, 2016 at 12:52:10 PM UTC-5, Clayton.sf wrote: > > we'll see. still mulling this over quite a bit. -- You received this message because you are subscribed to the Google Groups "RBW

[RBW] Re: Handlebar suggestions for the Hunq

Tim, consider some Ergon grips. They may solve the numbness issue w/o changing the bars.. http://ergonbike.myshopify.com/collections/grips/comfort-urban On Friday, December 23, 2016 at 5:44:18 PM UTC-5, Tim wrote: > > The only extra stem I have laying around is a Dirt Drop, which I would > prob

[RBW] Re: Pneu bars...time for MUSA?

The new bars: https://www.rivbike.com/blogs/peeking-through-the-knothole/pneubar-pname On Friday, December 16, 2016 at 6:19:31 PM UTC-5, Ryan Fleming wrote: > > You and Bill are both right > > Ryan the Riv and Nitto lover...whose really *excited about those Choco > norm bars* ...but whose steed

[RBW] Re: Snow powder and pack tires

On Sunday, December 18, 2016 at 2:30:15 PM UTC-5, Deacon Patrick wrote: > > This morning's ramble was down the pass four miles on densely snowpacked > roads and nearly no traffic to get communion for my family. Racing Ralphs > gripped wonderfully, and I would have been uncomfortable with the Th

[RBW] Re: Front rack for Appaloosa fork mounts

A Nitto m18 may be worth a look. https://www.google.com/search?q=nitto+m18&biw=1920&bih=1043&tbm=isch&tbo=u&source=univ&sa=X&sqi=2&ved=0ahUKEwi4lMqj14DRAhVBMSYKHYxvDu0QsAQIKA I have one coming and will use a Wald basket with it. On Sunday, December 18, 2016 at 11:49:59 PM UTC-5, Joe Bernard wro

[RBW] Re: Winter Ramble

Living near the Everglade is SW Florida makes it hard to relate to this post. We need body armor to keep the insects at bay. :-) On Saturday, December 17, 2016 at 11:43:43 AM UTC-5, Deacon Patrick wrote: > > Minus five, with the winter clothing details finally coming together in > the little det

Re: [RBW] Re: New bike day! R05C0 8U883

Very nice Bill! I wonder if we will be seeing more 'different' designs from Riv? On Saturday, December 17, 2016 at 11:54:47 PM UTC-5, Bill Lindsay wrote: > > The build is pretty much done now, including fenders, lighting and > tape/twine/shellac. > > ALBUM of Rosco >

[RBW] Re: I need help. I have become a Riv enabler.

r 15, 2016 at 5:36:09 PM UTC-5, Les Lammers wrote: > > <https://lh3.googleusercontent.com/-qvUzphGqYNQ/WFMaVj6FSeI/AMY/91Wk1VZzEpA9xc_KMKNEMjILEFHmVJLrwCLcB/s1600/Black%2BBike%2BFrame.jpg> > A buddy texts me and says that he was in Costa Mesa on business. He's been >

[RBW] I need help. I have become a Riv enabler.

A buddy texts me and says that he was in Costa Mesa on business. He's been thinking about a new bike for a whiIe. He presently rides an older Giant. I Go

[RBW] Re: Extreme long johns...

Dear Deacon, U B crazy. :-) Me? I'm I SW Florida near the Everglades. Under 70 degrees I'm in sweats. On Tuesday, December 6, 2016 at 7:19:05 PM UTC-5, Deacon Patrick wrote: > Fishnet. Wiggy’s (same company in Colorado that does Riv’s sleeping bag. > http://www.wiggys.com/clothing-outerwear/fi

[RBW] Re: handlebar material

The Nitto heat treated aluminum is stronger and more expensive than Cr Mo. On Thursday, December 15, 2016 at 4:14:34 AM UTC-5, drew wrote: > > Yeah but on a few they've said that if you intend to go off-road and throw > your weight around, get the aluminum. Aluminum albas used to be specified >

[RBW] Re: Three great test rides at RBWHQ

The day is not over. :-) On Wednesday, December 14, 2016 at 2:09:16 PM UTC-5, Bill Lindsay wrote: > > Michael said I've bought an Atlantis and a Rosco Road and a Hunqapillar. > > I have not bought a Hunqapillar yet. > > Bill Lindsay > El Cerrito Ca > > -- You received this message because you

[RBW] Re: FS: Rivendell Sam Hillborne 55ish

Be patient. Some one will get some holiday $$$. On Sunday, November 13, 2016 at 3:40:28 PM UTC-5, Belopsky wrote: > > Pretty standard Rivendell build. > > Shimano brake levers > Tectro canti brakes. > Shimano bar end shifters > Sugino XD2 triple crankset > IRD Front derailleur > Deore rear derai

[RBW] New Cheviot

I was looking for an all around bike about 9 years ago. Not much out there. Stumbled on Riv. Took a chance and got a Bleriot. The 650B's were calling me. I still lov

[RBW] Re: My Debate

On Tuesday, December 13, 2016 at 12:14:02 AM UTC-5, Bill Lindsay wrote: > > What debate? The obvious answer is both. The L'Avecaise is not a bike > packing bike. It's a cyclotouring bike at most. The Riv model it most > resembles would be a Roadeo. If you want a real touring bike or a bike >

Re: [RBW] Re: Holiday Saddle question

On Friday, December 9, 2016 at 1:00:30 PM UTC-5, Steve Palincsar wrote: > > I've bought several from an ebay store located in Montreal Canada for > under $200 and have nothing but good things to say about them. Clearly > not a replacement for Bill Laine, but a worthwhile resource nonetheless.

  1   2   >