[RBW] Re: Bullmoose, Thumbies and Rapid Rise

2010-05-25 Thread Joe Bernard
My beef with Rapid Rise is it eliminates a cool shifting procedure: pushing both shifters the same direction so you can drop down to a smaller (easier) front ring and smaller (harder) rear cog at the same time. Often, when dropping to a smaller front ring, the gearing change is too dramatic and

[RBW] Re: Bullmoose, Thumbies and Rapid Rise

2010-05-25 Thread Ginz
Thanks Joe, that's a good point. I think I'll dig up an old top- normal from the parts bin and give that a try. I love my rapid rise but I believe that top-normal will win this contest! Question #2: Has anyone set up their thumbies below the bar, in which case, rapid rise might win (ie.

[RBW] Re: Bullmoose, Thumbies and Rapid Rise

2010-05-24 Thread Jim M.
I think rapid rise is the way to go regardless of shifter choice. It makes shifting to a lower gear under stress a lot easier, and that makes a more sense when climbing. You don't have to take your hands off the bars to use thumb shifters. Thumb pushes out, index brings back; no need to use your

[RBW] Re: Bullmoose, Thumbies and Rapid Rise

2010-05-24 Thread Dave Craig
I have rapid rise on my Bombadil with thumbies and shimano shifters. It is works great - no reservations. Dave On May 24, 11:57 am, Ginz theg...@gmail.com wrote: Hello All, I am thinking about the setup of my Hunqapillar which will wear Bullmoose bars and Paul thumbies with shimano bar-end

Re: [RBW] Re: Bullmoose, Thumbies and Rapid Rise

2010-05-24 Thread Steve Palincsar
On Mon, 2010-05-24 at 13:36 -0700, Dave Craig wrote: I have rapid rise on my Bombadil with thumbies and shimano shifters. It is works great - no reservations. I have plenty of reservations. If you are used to high normal, rapid rise is more properly known as ass backwards and you will go nuts

[RBW] Re: Bullmoose, Thumbies and Rapid Rise

2010-05-24 Thread EricP
Funny, didn't have any problems shifting over to low-normal. Two of my three shifter bikes are set up that way. Strangely enough, my off road bike is the only one without that setup. And I do have to be more careful during shifts on climbs with that bike. (But that is the factory build.) Now,

[RBW] Re: Bullmoose, Thumbies and Rapid Rise

2010-05-24 Thread Ginz
When you are white knuckled, is it easier to push the thumbie or pull the thumbie? It sounds like pushing is easier, which means I might prefer a top-normal. I use rapid-rise with bar ends, but when you can grab the whole shifter an crank on it, it has to be a lot easier. -- You received this

Re: [RBW] Re: Bullmoose, Thumbies and Rapid Rise

2010-05-24 Thread andrew hill
i've got thumbies on my moosies, and i've moved them in a bit from right-up-against the grips, and even that way i can often shift simply by leaning my hand in at an angle. if i'd left em where Rivendell put em, i could have shifted w/o moving my hand in the slightest, though my big hands mean