Thanks all. I have a sale pending on the Honjos. Paul Germain Midlothian, VA
On Saturday, August 22, 2020 at 7:32:34 PM UTC-4 Bikie#4646 wrote: > After 13 years of use, my 43mm / 700c hammered Honjo fenders were > serviceable but looked ragged enough to replace. > Two years ago, I purchased a new set of replacement fenders (without > hardware) from Jitensha Studio in Berkley, CA. > I unboxed them but never unwrapped or mounted and finally decided to go > fenderless for a while. > > These will easily fit 32mm tires. (See my Flickr images of my Oswald Sport > Tourer with the old fenders in use.) > The fenders are not pre-drilled to allow for maximum installation > flexibility. > I will include the previous hardware and stays, including PDW (Pacific > Design Works) Safety Tabs on the front fender stays. I can provide the old > fenders, > which are still serviceable and may act as a template of sorts for > drilling. > > Previous stays on my 56cm Oswald Sport Tourer are aprox. 345mm (front) / > 350mm (rear) from fender edge to stay end. > > Flickr images: > https://www.flickr.com/photos/bikecrazy-paul/albums/72157715593666532 > > I paid Jitensha $73 for the two fenders without hardware, plus $30 > shipping and will sell the fenders plus hardware (with old fenders if you > wish) for $50, plus $30 shipping. > PayPal preferred. > > Paul Germain > Midlothian, VA > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/bb716233-22e4-421f-a902-ed48fc354dcdn%40googlegroups.com.
