[RBW] Re: Hanging Edelux + Nitto Big Front
Bill thanks for the suggestion, actually thats how i have my current light, but i've never liked it aesthetically and i feel it gets in the way--even though that makes the most practical sense (out in front, best light distribution etc). david, thanks, i was thinking about p-clamps too, and that seems to be the simplest option. appreciate all the ideas everybody! -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at https://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
[RBW] Re: Hanging Edelux + Nitto Big Front
My apologies. Didn;t realize the rack in question had no eyelets. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at https://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
[RBW] Re: Hanging Edelux + Nitto Big Front
On Monday, October 16, 2017 at 11:25:06 AM UTC-7, Minh wrote: > > Hi all, > > Has anyone come up with a creative solution for hanging an edelux when > using a Nitto Big Front Rack? it does not have any side bosses that i > could use (like you would with a Marks Rack). > Attach it via a p-clamp to one of the front rails (p-clamp + longish bolt + nut [to clamp the p- to the rail] + spacers [to get the light out far enough to clear the rail + antiDelux + nylock.)A fancy alternative if you have a soldering or brazing torch handy would be to get a suitably sized piece of allthread, then solder/braze a nut on far enough to clamp the p-, then do nylock + p-clamp + previously soldered nut + spacers + antiDelux + nylock. -david parsons -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at https://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
[RBW] Re: Hanging Edelux + Nitto Big Front
How do you propose he “try that” on a Nitto Big Front Rack?? I don’t see any suitable location to utilize a Sheldon nut on a Nitto Big Front Rack. That is a good general solution that I am using on a Marks Rack. I’m also using that solution on a Campee F27. Unless I’m overlooking a very clever mechanical maneuver, it’s not an option on a Nitto Big Front, because there is no good place to put it. You could hide it way in the back where the stays are fixed but that’s a lousy place for a lamp and it would prevent you from hanging a pannier, which kind of defeats the purpose of the Big Front Rack. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at https://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
[RBW] Re: Hanging Edelux + Nitto Big Front
On a Big Front Rack, or on ANY Nitto Rack with a front reflector tab, I would always attach the dynamo headlamp to that front tab, using one of these: https://www.rivbike.com/collections/lights/products/edelux-light-mounts A hanging Edelux might look a little goofy since the mount goes UP and then the lamp comes DOWN, but I would still put it there. In fact, my HubbuHubbuH tandem came with dynamo wheels and I have a Big Front Rack on there, and I am just about to pick a lamp. That's definitely where it's going, with that mount. Bill Lindsay El Cerrito, CA On Monday, October 16, 2017 at 11:25:06 AM UTC-7, Minh wrote: > > Hi all, > > Has anyone come up with a creative solution for hanging an edelux when > using a Nitto Big Front Rack? it does not have any side bosses that i > could use (like you would with a Marks Rack). Has anyone come up with > adapters? > > I have a basket on it right now, so i was thinking of bolting a flat piece > of stock to the bottom of the basket and using a fender light mount upside > down (like this http://www.velolumino.com/at-headlight-mount.html) or > fashioning something similiar. But looking for more ideas, thanks for any! > > > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at https://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.