Shouldn't be an issue but depending on the length of the forward facing horizontals, your chosen chainring(s)/gearing and required chain length you may need to make some slight adjustments to get things to line up properly.
I ran into a problem on one frame when the dropouts had enough room for a 2 or 3 tooth cog difference with single chainring but I needed one of those short half-links to get the chain length just right to make use of both cogs possible... in that particular scenario my chainring selection was limited so my only option was adjust chain length, stick with one cog in back, or file the dropouts a little longer. Should you experience similar challenges you may have an easier time just going + or - a tooth with the chainring. Brian Cole Lawrence, NJ On Sunday, February 11, 2018 at 1:21:03 PM UTC-5, Carla Waugh wrote: > Can the rear dropout be facing forward to run two single cigs and still > allow the chain to be moved by hand? -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at https://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.