Re: [RBW] Re: RoadUno 'Flat' Bars

2025-03-22 Thread P W 
Alexis,Good eye! ;) Some of my favorite grips ever. I also have a set of the WTB-modded ones, with the cut down flange, so they work better with shifters.Those I’m saving for a Phoenix rebuild I’ve had in the works for a longtime now.This version was being saved for a single speed build someday, the Uno being close enough!I wish you’d looked at that Bruce, too! I’m lucky enough to have both a Rock n Road and Chinook. Sometimes even my own luck astounds me!P. W.~(917) 514-2207~On Mar 21, 2025, at 11:12 PM, R. Alexis  wrote:P.W.,Nice Magura (pre Wilderness Trail Bikes modified) grips! Nice bars also. You been holding onto those for something special like this? I have a set of WTB modified ones on my Rivendell Mountain. Got them when a shop closed in the early 90's, probably about 1993 or so along with some other stuff. Wish I would have looked at the Bruce Gordon they had there. Thanks,Reginald AlexisOn Thursday, March 20, 2025 at 9:24:48 AM UTC-5 P W wrote:Wavies, with bar extensions, on mine.It’ll get the new Goldilocks bar, eventually, I’m sure. P. W.~(917) 514-2207~On Mar 20, 2025, at 7:08 AM, tío ryan  wrote:I've got Ahearne+MAP handlebars on my Roaduno and love 'em. They feel a lot better than the choco bars did on this bike—chocos were too chill and work better on my Platypus. I reckon wavies would be nice on a Roaduno, they seem similar to the map bars. -tío On Thursday, March 20, 2025 at 9:27:17 AM UTC-4 [email protected] wrote:Some folks I know have recommended the Nitto Jitensha Bar...On Wednesday, March 19, 2025 at 3:10:28 PM UTC-7 [email protected] wrote:I've been riding singlespeed with 44cm Noodle Bars, but I'd like to try some flattish bars with a bit of rise.I've been looking at the Bull and Wavie on the Riv Site, the SimWorks Fun3 and Getarounds, and some Velo Orange bendy bars. Have you tried these with the RoadUno, or with any Riv set-up singlespeed? What bars did you go with, and how has the ride been?Cheers



-- 
You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [email protected].
To view this discussion visit https://groups.google.com/d/msgid/rbw-owners-bunch/98095b02-5df7-4d1b-a306-3a9600816172n%40googlegroups.com.




-- 
You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [email protected].
To view this discussion visit https://groups.google.com/d/msgid/rbw-owners-bunch/c20c3e31-f7f0-49d9-a44b-d7f7d61f057an%40googlegroups.com.




-- 
You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [email protected].
To view this discussion visit https://groups.google.com/d/msgid/rbw-owners-bunch/CBCF3BCE-FFC7-4F2B-994E-5911CADB472E%40gmail.com.

Re: [RBW] Re: RoadUno 'Flat' Bars

2025-03-21 Thread R. Alexis 
P.W.,

Nice Magura (pre Wilderness Trail Bikes modified) grips! Nice bars also. 
You been holding onto those for something special like this? I have a set 
of WTB modified ones on my Rivendell Mountain. Got them when a shop closed 
in the early 90's, probably about 1993 or so along with some other stuff. 
Wish I would have looked at the Bruce Gordon they had there. 

Thanks,

Reginald Alexis

On Thursday, March 20, 2025 at 9:24:48 AM UTC-5 P W wrote:

> Wavies, with bar extensions, on mine.
>
> It’ll get the new Goldilocks bar, eventually, I’m sure. 
>
> [image: image0.jpeg][image: image1.jpeg][image: image2.jpeg][image: 
> image3.jpeg][image: image4.jpeg][image: image5.jpeg][image: image6.jpeg]
>
> P. W.
> ~
> (917) 514-2207
> ~
>
>
>
>
> On Mar 20, 2025, at 7:08 AM, tío ryan  wrote:
>
> I've got Ahearne+MAP handlebars 
>  on my Roaduno 
> and love 'em. They feel a lot better than the choco bars did on this 
> bike—chocos were too chill and work better on my Platypus. 
>
>
> I reckon wavies would be nice on a Roaduno, they seem similar to the map 
> bars. 
>
> -tío 
> On Thursday, March 20, 2025 at 9:27:17 AM UTC-4 [email protected] wrote:
>
>> Some folks I know have recommended the Nitto Jitensha Bar...
>>
>> On Wednesday, March 19, 2025 at 3:10:28 PM UTC-7 [email protected] 
>> wrote:
>>
>>> I've been riding singlespeed with 44cm Noodle Bars, but I'd like to try 
>>> some flattish bars with a bit of rise.
>>>
>>> I've been looking at the Bull and Wavie on the Riv Site, the SimWorks 
>>> Fun3 and Getarounds, and some Velo Orange bendy bars. Have you tried these 
>>> with the RoadUno, or with any Riv set-up singlespeed? What bars did you go 
>>> with, and how has the ride been?
>>>
>>> Cheers
>>>
>> -- 
> You received this message because you are subscribed to the Google Groups 
> "RBW Owners Bunch" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to [email protected].
> To view this discussion visit 
> https://groups.google.com/d/msgid/rbw-owners-bunch/98095b02-5df7-4d1b-a306-3a9600816172n%40googlegroups.com
>  
> 
> .
>
>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To view this discussion visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/c20c3e31-f7f0-49d9-a44b-d7f7d61f057an%40googlegroups.com.

Re: [RBW] Re: RoadUno 'Flat' Bars

2025-03-21 Thread Jason Fuller 
Two bars that I've been really liking and fit the Riv aesthetic perfectly 
are the Crumbworks KT bar and the B802, both Nitto heat treated aluminum.  
The B802 has about 25 degrees of sweep while the Crumbworks is close to 
40.  Both 25.4mm and 720mm wide, with room to cut down as well 

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To view this discussion visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/e2b1cf1b-c4a8-4aef-bfcc-65b4308ddbe4n%40googlegroups.com.

Re: [RBW] Re: RoadUno 'Flat' Bars

2025-03-20 Thread Otto Frey 
Great pics Philip. That looks like just the kind of shape I had in mind. 
The Ahearne Map bars look good as well. I'm going to try some VO Curvy bars 
that I found on ebay. I'm sure Wavies or the in-the-works new bar would 
have nicer finishes and make, but the shape of the VO's should be about the 
same.

Thanks for the recommendations all

On Thursday, March 20, 2025 at 6:49:27 PM UTC-4 lconley wrote:

> I have VO Klunkers on mine, kind of like a wavie with extra rise. 
>
>
> On Thu, Mar 20, 2025 at 10:24 AM P W  wrote:
>
>> Wavies, with bar extensions, on mine.
>>
>> It’ll get the new Goldilocks bar, eventually, I’m sure. 
>>
>> [image: image0.jpeg][image: image1.jpeg][image: image2.jpeg][image: 
>> image3.jpeg][image: image4.jpeg][image: image5.jpeg][image: image6.jpeg]
>>
>> P. W.
>> ~
>> (917) 514-2207
>> ~
>>
>>
>>
>>
>> On Mar 20, 2025, at 7:08 AM, tío ryan  wrote:
>>
>> I've got Ahearne+MAP handlebars 
>>  on my Roaduno 
>> and love 'em. They feel a lot better than the choco bars did on this 
>> bike—chocos were too chill and work better on my Platypus. 
>>
>>
>> I reckon wavies would be nice on a Roaduno, they seem similar to the map 
>> bars. 
>>
>> -tío 
>> On Thursday, March 20, 2025 at 9:27:17 AM UTC-4 [email protected] wrote:
>>
>>> Some folks I know have recommended the Nitto Jitensha Bar...
>>>
>>> On Wednesday, March 19, 2025 at 3:10:28 PM UTC-7 [email protected] 
>>> wrote:
>>>
 I've been riding singlespeed with 44cm Noodle Bars, but I'd like to try 
 some flattish bars with a bit of rise.

 I've been looking at the Bull and Wavie on the Riv Site, the SimWorks 
 Fun3 and Getarounds, and some Velo Orange bendy bars. Have you tried these 
 with the RoadUno, or with any Riv set-up singlespeed? What bars did you go 
 with, and how has the ride been?

 Cheers

>>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "RBW Owners Bunch" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to [email protected].
>> To view this discussion visit 
>> https://groups.google.com/d/msgid/rbw-owners-bunch/98095b02-5df7-4d1b-a306-3a9600816172n%40googlegroups.com
>>  
>> 
>> .
>>
>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "RBW Owners Bunch" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to [email protected].
>>
> To view this discussion visit 
>> https://groups.google.com/d/msgid/rbw-owners-bunch/F441EF61-60F8-40BC-8355-C22B0B515DAF%40gmail.com
>>  
>> 
>> .
>>
>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To view this discussion visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/acf75c1f-234d-47d1-80c2-75ab589b503en%40googlegroups.com.