Hi Dave,
Thanks for your help. All options seem to be exhausted with Schneider
tech support.
I haven't tried the SCP advanced menu to restore defaults. After I enter
that setting should I shut down all DC inputs for 5 minutes, or is that
automatic?
Daniel, at tech support, knows of the si
Chris I would certainly replace the hub & cables making sure to grease them one other thing is swap your M3 to confirm it is or not that. On Feb 18, 2022, at 8:35 AM, Christopher Warfel wrote:
Hi, This system is not tied into Optics. Merchant
Ma
Chris; An inexpensive Klein LAN cable tester became a standard part of my
tool kit when the Mate3 and other monitoring systems came out. I now test
all Cat6 cables from all manufacturers before installing them, even if they
are new in the sealed bag. I've often ended up as a home networking IT
cons
Hi, This system is not tied into Optics. Merchant Marine retiree and he
did not see the value in that. If it ran on steam, he might have gone
for it.
I will check the hub. It is the original hub (11 years old). I have a
system of the same vintage (w/r to Hub) and it is displaying correctly.
Hi Chris,
What type of charge controller is it? Older charge controllers seem to
have issues interacting with the Mate 3s perfectly. Oddly, many times it
will report the data OK to OpticsRE. Which Hub do you have? Mate 3s needs
to be paired to a Hub 10.3. Also, you may try changing ports in t
5 matches
Mail list logo