Hi Jay,
Just use your roofing sealant of choice: fill the pilot hole, leaving a
nice big dab on the surface. Because all holes are in the peaks of the
corrugations, the penetration point should see very little water there. In
my opinion, this is less risky than trying to seal the corrugations
From: RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] On
Behalf Of AE Solar
Sent: Thursday, March 05, 2015 8:01 AM
To: RE-wrenches
Subject: [RE-wrenches] Corrugated Roof Brackets
Hey Wrenchers,
Anyone have feedback or preferences on mounting systems for corrugated
roofs? I'm looking
, LLC
PO Box 531
Monte Vista, CO. 81144
sgsrenewab...@gmail.com
719.588.3044
www.sgsrenewables.com
From: RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] On
Behalf Of AE Solar
Sent: Thursday, March 05, 2015 8:01 AM
To: RE-wrenches
Subject: [RE-wrenches] Corrugated Roof Brackets
Hi Mark,
I'm curious how you seal the hole.
thanks
jay
peltz power
On Mar 5, 2015, at 9:46 AM, Mark Westbrock westbr...@positiveenergysolar.com
wrote:
We like the SnapNrack corrugated roof blocks. They are simple, effective,
and not too expensive (I think around $3.50 each). The only
@lists.re-wrenches.org
Sent: Thursday, March 5, 2015 2:40 PM
Subject: Re: [RE-wrenches] Corrugated Roof Brackets
Hi Mark,
I'm curious how you seal the hole.
thanks
jay
peltz power
On Mar 5, 2015, at 9:46 AM, Mark Westbrock westbr...@positiveenergysolar.com
wrote:
We like the SnapNrack
I've tried the Versabracket, which uses a similar sealing method, with
great results. I can't speak for the Corrubracket specifically.
Jason Szumlanski
On Thu, Mar 5, 2015 at 11:00 AM, AE Solar autonomousenerg...@gmail.com
wrote:
Hey Wrenchers,
Anyone have feedback or preferences on mounting
to
contact S-5! directly to get them. They're in the ~ $10/piece (ouch!)
range.
marco
From: RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] On
Behalf Of AE Solar
Sent: Thursday, March 05, 2015 6:01 AM
To: RE-wrenches
Subject: [RE-wrenches] Corrugated Roof Brackets
Hey
We like the SnapNrack corrugated roof blocks
http://www.snapnrack.com/series-500-metal-roof-mount-system. They are
simple, effective, and not too expensive (I think around $3.50 each). The
only trick is that you need access to the roofing members because you will
need to add blocking or sister
Hey Wrenchers,
Anyone have feedback or preferences on mounting systems for corrugated
roofs? I'm looking at the S-5! CorruBracket
http://www.s-5.com/clamps/index_2624.cfm. Its for a very small system on
a hunting cabin. The pitch is probably about 20 degrees and and I'm
concerned about leaks over
Also look at Sunmodo they have some nice brackets and are state side
Jerry
On Mar 5, 2015 6:00 AM, AE Solar autonomousenerg...@gmail.com wrote:
Hey Wrenchers,
Anyone have feedback or preferences on mounting systems for corrugated
roofs? I'm looking at the S-5! CorruBracket
...@lists.re-wrenches.org] On Behalf Of All Solar,
Inc.
Sent: Thursday, January 23, 2014 1:37 PM
To: re-wrenches@lists.re-wrenches.org
Subject: [RE-wrenches] Corrugated roof brackets
Can anyone comment on the S-5! CorruBracket?
Any other recommendations or comments appreciated.
Jeremy Rodriguez
Go look at sunmodo they also have some solutions tell them jerry from
affinity sent you, great price point. The are in Washington state check it
out
On Jan 23, 2014 1:37 PM, All Solar, Inc. allso...@scswifi.net wrote:
Can anyone comment on the S-5! CorruBracket?
Any other recommendations or
Can anyone comment on the S-5! CorruBracket?
Any other recommendations or comments appreciated.
Jeremy Rodriguez,
President
All Solar, Inc.
1463 M
Penrose Colorado 81240
719-372-3808 office
719-372-3804 fax
www.asolarelectric.com
Sent by Jeremy's iPhone. Sorry for typos and shorthand!
13 matches
Mail list logo
