I have this exact card in one of my machines. It will not work with the
stock Red Hat kernel. You will have to build a custom kernel to get it
work.
The problem is that the tulip driver included in the official kernel
sources, and hence Red Hat 6.0 is version 0.89H which detects this card
as "un
at we should do?
thanks
-Original Message-
From: Bill Nottingham [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, October 06, 1999 9:28 AM
To: [EMAIL PROTECTED]
Subject: Re: Problems with Linksys PINC 2.0
Farid Yavari ([EMAIL PROTECTED]) said:
> thank you for the reply. I looked at the web
Farid Yavari ([EMAIL PROTECTED]) said:
> thank you for the reply. I looked at the web site and could not see any
> Linksys drivers. The codes on the processor of NIC card say:
>
> Linksys
> LNE100TX
> LC82C115
> T4443701
> 37BDX
That should work with the tulip driver.
Bill
--
To unsubscrib
]]
Sent: Wednesday, October 06, 1999 3:18 AM
To: [EMAIL PROTECTED]
Subject: Re: Problems with Linksys PINC 2.0
> Hello,
> We are installing RH Linux 6.0 on our PC which has a LINKSYS PINC version
> 2.0 100BT ethernet card in it. The installation program does not recognize
> the card a
> Hello,
> We are installing RH Linux 6.0 on our PC which has a LINKSYS PINC version
> 2.0 100BT ethernet card in it. The installation program does not recognize
> the card and we cannot select any drivers from the list provided by the
> installation program. When we run the installation program
