RE: FireWire HDD problem
Hi there, Well I checked out the driver but there is no jumper setting available on the disk, like the case in IDE. It just have :- 1. Power Connector 2. 2 FireWire Ports Apart from this there is nothing outside the drive. Regards, Rishabh -Original Message- From: Dan Hollis [mailto:[EMAIL PROTECTED] Sent: Monday, August 18, 2003 11:27 PM To: Rishabh Kumar Goel Cc: [EMAIL PROTECTED] Subject: Re: FireWire HDD problem On Mon, 18 Aug 2003, Rishabh Kumar Goel wrote: > I have a Bencent 3.5" FireWire HDD. I also have a TI's TSB43ab22 iOHCI PCI > card with a PCI-PCI bridge interface. You have to set the drive for cable select, not master or slave. -Dan -- [-] Omae no subete no kichi wa ore no mono da. [-] Scanned by SecureSynergy VirusScreen Service. For more information log on to : http://www.securesynergyonline.com or http://www.securesynergy.com ___ Redhat-devel-list mailing list [EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-devel-list
Re: FireWire HDD problem
On Mon, 18 Aug 2003, Rishabh Kumar Goel wrote: > I have a Bencent 3.5" FireWire HDD. I also have a TI's TSB43ab22 iOHCI PCI > card with a PCI-PCI bridge interface. You have to set the drive for cable select, not master or slave. -Dan -- [-] Omae no subete no kichi wa ore no mono da. [-] ___ Redhat-devel-list mailing list [EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-devel-list
Re: FireWire HDD problem
Hi, For what it's worth, a web search turned up: http://armin.emx.at/ipod/ieee1394_howto.html Venkatesh > I have a Bencent 3.5" FireWire HDD. I also have a TI's TSB43ab22 iOHCI PCI > card with a PCI-PCI bridge interface. > When i plug the HDD into the card in my Pentium 4, i recieve the following > errors: > 1.Configrom Quadlet read error. > 2.Login time out. i.e my system is not able to log into the HDD. though the > HDD is working perfectly fine on windows. > > Does anybody has any solution to it. I tried the same HDD with my NetBSD > system, over there also the same problem exists, the device after writing the > LOGIN ORB does not respond. ___ Redhat-devel-list mailing list [EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-devel-list
Re: FireWire HDD problem
On Mon, 18 Aug 2003, Rishabh Kumar Goel wrote: > I have a Bencent 3.5" FireWire HDD. I also have a TI's TSB43ab22 iOHCI PCI > card with a PCI-PCI bridge interface. > When i plug the HDD into the card in my Pentium 4, i recieve the following > errors: > 1.Configrom Quadlet read error. > 2.Login time out. i.e my system is not able to log into the HDD. though the > HDD is working perfectly fine on windows. > > Does anybody has any solution to it. I tried the same HDD with my NetBSD > system, over there also the same problem exists, the device after writing the > LOGIN ORB does not respond. >From what I've read, firewire is difficult for OSS because the specs are proprietary and the hackers have to reverse-engineer in order to write drivers. In contrast, information about USB is readily available. Given the choice, I would prefer USB2 over firewire. > > -- Please, reply only to the list. Join the "Linux Support by Small Businesses" list at http://mail.computerdatasafe.com.au/mailman/listinfo/lssb ___ Redhat-devel-list mailing list [EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-devel-list
