Hi everyone,
Does anyone know how to uninstall mozilla 0.9.9 to make way for the newer
version of it. I searched through the net and most of the places I got the
answer `delete the directory in which you installed mozilla`. The mozilla
that I am using came installed in the redhat distribution. I
Hi everyone,
I have reached my level of patience with gnutls. everytime i try to run
the configure script of gnutls, i get the following error
*** Checking for external libraries...
checking for libgcrypt-config... /usr/local/bin/libgcrypt-config
checking for libgcrypt - version = 1.1.43... no
Thanks for the reply. I had skipped the part on how packets are sent out
of my switch in the first mail. Currently the switch sends out untagged
packets. I tried to change that to tagged when I had tried to sniff the
packets.
What I wanted was that if i send out tagged packets from my switch I
Hi,
I am trying to sniff for VLAN packets on a redhat 9 box. I have a network
in which I am using the HP Pro Curve 2500 switches. I have configured my
VLANs on these switches. I have tried the following
On a redhat 9 box which is connected to a VLAN on the switch, I ran
tcpdump -vlan. However I
Hi,
I am trying to sniff for VLAN packets on a redhat 9 box. I have a network
in which I am using the HP Pro Curve 2500 switches. I have configured my
VLANs on these switches. I have tried the following
On a redhat 9 box which is connected to a VLAN on the switch, I ran
tcpdump -vlan. However I
Hi Ed,
I had the very same problem a few days back. This is how u get ur mouse
to obey ur hand again.
Find the file /etc/X11/XF86Config
Find the section that looks as follows and replace with the one that is
shown below
Section InputDevice
Identifier Mouse0
Driver
Hi everyone,
I have been trying to install or upgrade my apache 1.3 (which came by
default with Redhat 7.3) to apache 2.0. I tried following two documents -
one from tldp.org and another one from the apache website. however i end
up getting confused.
are there any other good documents around
Hi,
I recently started having boot problems on one of my linux workstations.
It looks like a hardware problem. However I needed some advice before I
contact the customer service.
When I try to boot my machine it gets hanged at various levels of the boot
process, a different level during each
Hi,
I have been trying to get sound and sound recorder working on my system
for almost a month now. However there has been very little luck in it. The
sound card is detected by the system and I am able to hear mp3 using XMMS.
I am also able to hear .au and .wav files. However whenever I try to
hi chris,
a few things. what does the -l option stand for ? try using traceroute
without any options.
if your computer is connected in a network which is administered by
someone else, make sure they dont have a firewall. to check this you can
first do a traceroute to one of the machines in the
Hi,
I was trying to configure a DNS server for my private network. Since I
dont know much about configuring it, I would really appreciate if someone
could point me to a tutorial / document, which they think is a good
resource.
Thanks,
Rahul.
--
redhat-list mailing list
unsubscribe
hi,
i have a server which is connected to a printer in its network. I am able
to print from the server. however when i try to print to the same
printer from a host in another network i am getting the following error
Status Information:
sending job 'root@marieke+353' to feebe@localhost
hi,
i have a server which is connected to a printer in its network. I am able
to print from the server. however when i try to print to the same
printer from a host in another network i am getting the following error
Status Information:
sending job 'root@marieke+353' to feebe@localhost
Hi,
Sorry for asking an off topic question. I am looking out for the source
code of the ping program so that I can make some modifications and use it
as per my needs. Searching through the net lead me to the website of the
author of the ping program. However the source code does not get
Hi,
I was trying to make use of the sudo utility, which in my understanding
allows the root to give certains users the privelege the execute a set of
commands.
I configured the file sudoers making use of the command visudo. My sudoers
file looks like this
# User alias specification
User_Alias
-not-possible.
I got both the errors when I was trying to print the test page.
I really appreciate if you could give some advice,
Thanks,
Rahul.
On Wed, 29 Jan 2003 [EMAIL PROTECTED] wrote:
On Wed, 29 Jan 2003, rahul b jain cs student wrote:
Hi Rahul,
If you installed from source I do
Hi,
I had installed CUPS on my linux box. I had installed by downloading the
source code of CUPS from the CUPS website. How do I uninstall CUPS ?? I
checked the website but could not find any useful information.
The main reason I am uninstalling it is that my printer does not respond
to CUPS
try making use of the command mii-tool. it is basically used to view and
manipulate the interface speeds. i think this command will suffice your
needs.
do man mii-tool for more information.
cheers,
rahul.
On Wed, 29 Jan 2003, Geoff Smith wrote:
HelP!!.i need to know how to get my network
Hi everyone,
I was curious to know if there was any way in which I would be able to
drop specific IP packets at a machine. I know by making use of firewalls I
may be able to do that. I was wondering if there is any other way of
dropping packets other than firewalls.
Thanks,
Rahul.
--
hi,
I have been trying to add a printer to my linux machines. I downloaded
CUPS and installed it. I was able to configure my printer which is a
LaserJet 2200d with a jetdirect card in it. However whenever I try to
print a test page from the web interface of CUPS I get the following error
hi,
I have been trying to add a printer to my linux machines. I downloaded
CUPS and installed it. I was able to configure my printer which is a
LaserJet 2200d with a jetdirect card in it. However whenever I try to
print a test page from the web interface of CUPS I get the following error
Hi,
go to the directory /var/log. if you have not written any script to
manage your log files, you will see a lot of log files like message.2,
message.3 and so on. delete the ones you DONT WANT.
i have also faced this problem many times. the best way to get out of it
is to write a script that
Hi,
I am trying to connect a network printer HP LaserJet 2200d (having a
network card). I installed the software WebJetAdmin which the HP guys says
is used to monitor and configure the printer. I was trying to access this
service through the browser as hostname.domain:port. However I keep
getting
HI,
This problem is related to X-windows boot up. After every couple of days,
my machines fails to boot up in the x-windows mode. When I delete some of
the log files, it boots up properly in the X-windows mode.
Is there a permanent solution to this problem ?
Thanks,
Rahul.
--
redhat-list
hi steve,
you can look at the manual of the command ifconfig. With this command you
can normally change all the ips of the interfaces.
you can also change the files that are in the following directory.
/etc/sysconfig/networking/devices
rahul.
On Wed, 11 Dec 2002, Steve Buehler wrote:
I have
hi,
I was looking out for a s/w that can open all the microsoft office
application files like word, powerpoints, excel etc. At the moment I have
Kword etc, but they dont work well and most of the times the files wont
open.
Are there any suggestion for a s/w ?
Thanks,
Rahul.
--
redhat-list
Hi,
I had emailed this problem on the list before but was not able to get any
positive response. So here I am trying it once again. It is really driving
me crazy now as I am not able to make any link between the problem and the
way I solve it.
I have been facing the problem for quite some time.
Hi,
I have been facing the problem for quite some time. In my private network,
I have 4 routers. The routers have been configured properly (I think) by
setting the IP addr of the interfaces, gateways where ever neccessary and
proper subnet mask. When I boot up the routers, I am unable to ping to
you can change the fonts by going to Edit-Preferences. Change the font
settings over there. Also check the box which says use my default fonts,
overriding document specified fonts
rahul.
On Mon, 4 Nov 2002, Vidiot wrote:
For some reason, when a link brings up a new Netscape window, all of the
hi,
you have to change the preferences of the web browser you are using. For
Mozilla and netscape click on Edit-Preferences. Click on Apperance in the
dialog box that pops up and change the fonts as per your needs. For
Konqueror there is a zoom icon. you can click on that to increase your
font
Hi,
I wanted to configure Konsole (terminal program of KDE). I basically
wanted the konsole to behave like a VT-100 terminal with the baud rate of
1200, 8 databits, 1 stop bit and no flow control. Is it possible to
configure the konsole in that manner.
I have searched the web for answers but
try the following command and see if it works
ping -I 10.1.1.2 10.1.5.1
rahul.
On Fri, 27 Sep 2002, Matthew Boeckman wrote:
Hmm. Are saying that if you try to ping the eth1 interface from a
machine attached to the network on eth0 it does not work? If so what is
does the routing table
Hello everyone,
Can someone tell me how to find outw hat is the capacity of an interface
i.e. whether a particular interface is configured to work on 10 Mbps or
100 Mbps. If I want to change this setting, can I as a root do it ?
Many Thanks,
Rahul.
--
redhat-list mailing list
unsubscribe
hi
you can try to make use of this link. it was very helpful to me
http://www.tldp.org/LDP/nag2/
you might also want to look into the redhat / linux bible books. they are
also a good place to start learning about neworking and linux in general.
rahul.
On Tue, 24 Sep 2002, Bret Hughes wrote:
in order to make your routes permanent, you can add your route command to
the following file
/etc/rc.local
this file is called at boot time and hence any command present in this
file will be executed.
rahul.
On Wed, 18 Sep 2002, Rechenberg, Andrew wrote:
Add your routes to
you can set ip forwarding in your computer by making the following change
in the file /etc/sysctl.conf
net.ipv4_forward = 1
you might want to check your routing table and see if it has been set
according to your needs.
rahul.
On Thu, 12 Sep 2002 [EMAIL PROTECTED] wrote:
In [EMAIL
after you login as root type passwd and then follow the instructions on
screen.
rahul.
On Wed, 11 Sep 2002, ebinc wrote:
Thanks I mean after I login as root what do I need to change the password
- Original Message -
From: Anthony Abby [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent:
you can try making use of tcpdump if you havent tried it till now.
On Wed, 11 Sep 2002, [iso-8859-1] linux power wrote:
I have nat masquerade. Can I watch the ip adresses
going out and in from the lan.
__
Se den nye Yahoo! Mail på
Hi,
I have a Linux server which I want to configure as a Router. On one end it
is connected to a workstation and on the other to a server both of which
are Linux machines. So the network looks like this
Workstation Router Server
192.168.0.1 192.168.0.14
.
On Mon, 9 Sep 2002, Skuse, Phil wrote:
In /etc/sysctl.conf:
net.ipv4.ip_forward = 1
Or
echo 1 /proc/sys/net/ipv4/ip_forward
Also check that you are not blocking the packets with ipchains/iptables
-Original Message-
From: rahul b jain cs student [mailto:[EMAIL PROTECTED
hi,
In order to change any network settings you can use Network Configuration
which is under System. If you cannot find it under System, you may
want to try typing redhat-config-network at the terminal. This will open
up the Network Configuration Dialog Box. Else you may edit the network
files
Hi,
I have a linux server which was bought from Penguin Computing (Atlus
130). I wanted to purchase keyboards and mice for the same. I had been
looking on the net for the past week but was getting confused.
My questions are
1. how do i know that a particular keyboard and mice will work
with
Hi,
I was trying to change the host name of my linux machine. I did so by
editing the file /etc/sysconfig/network. If i reboot the system, it works
fine recognizing the new hostname. However if i reboot the system again,
it goes back to its old hostname.
Could anyone tell me, what is the
Hi,
I am new to linux, I am trying to log into a Linux server which is at the
moment a stand alone machine. I am trying to log into the windows type
enviornment. I am not able to log into the windows type environment as any
user including the root user. However after a few logins, it gets me the
44 matches
Mail list logo