You could put an opto-isolator in SERIES with the LEDS, then use the
isolated transistoe output to trigger your controller.
Henry
--- In Repeater-Builder@yahoogroups.com, mch [EMAIL PROTECTED] wrote:
I have one with an output, but it seems when I checked into it, it was
not suitable for the
I'm looking for a MICOR UHF Repeater/Base Station 12-Watt 450-470 MHz PA
Deck, Motorola # TLE1683A. I have one of the 2-watt versions of this PA,
which is just about identical except that there is an attenuator that drops
the output power from 12W to 2W (what a waste!), but there are some other
Yes that would work. I am going to try and trigger the SAME this weekend, I
got the files to work with that they use. I was just going to use the
voltages from the leds into a relay and send it on to the RLC controller.
Wish me luck, should be able to get it. If not, I'll try again.
Mathew
Hi all,
I'm sorry if my explanation of this problem is incomplete.
The RC-850 was connected through a modification to the squelch gate card. I
didn't do the mod, but I believe it was done using instructions for
modifying a Micor station on repeater-builder.com.
As for how it got on that
Hello ...
skipp025 wrote:
Neil McKie [EMAIL PROTECTED] wrote:
Hello ...
Back in the ... er ... ah ... late eighties:
When the MSR-2000 was in its prime time.
Mid - late eighties?
Ordered a new 450 MHz MSR2000 from the big M
... was shipped as expected - had the 12
I'd like to find a continuous-duty MSR-2000 450-470 MHz PA Deck (any level,
but 20-40 watts would be more than enough). I'm trusting that they would
directly swap out with the one that I'm using now - I have a 100-watt
intermittent duty MSR-2000 Repeater on a UHF Ham channel, but don't want to
ukirlp june 2004 newsletter
http://www.qsl.net/g3zhi/newsletter.DOC
73 Ian G3ZHI
http://www.qsl.net/g3zhi - many ham radio links
http://www.ukirlp.co.uk
G4NJI IRLP 5200 Echolink 135909
Rotherham simplex 145.2875mhz
GB3XN IRLP 5708 Echolink 153126
Langold 430.925 Mhz
Ian Abel G3ZHI
52
Joe - thanks for the info. This particular MICOR UHF Repeater I just picked
up came without a PA deck at all (someone else beat me to it), so since I
was looking for one, I decided to try to find a lower power one than the
usual 75 watt ones that usually come with them. I really didn't want to
i have several extra motorola micor power supplys if you have not located one
yet
The best thing to hit the Internet in years - Juno SpeedBand!
Surf the Web up to FIVE TIMES FASTER!
Only $14.95/ month - visit www.juno.com to sign
--- [EMAIL PROTECTED] [EMAIL PROTECTED] wrote:
Joe - thanks for the info. This particular MICOR UHF
Repeater I just picked
up came without a PA deck at all (someone else beat
me to it), so since I
was looking for one, I decided to try to find a
lower power one than the
usual 75 watt ones
Hi Larry,
[EMAIL PROTECTED] [EMAIL PROTECTED] wrote:
I'd like to find a continuous-duty MSR-2000
450-470 MHz PA Deck (any level, but 20-40
watts would be more than enough).
It's all about the PA heat sink, which IMO
doesn't support high duty cycle operation
above say... 25-35 watts
--- [EMAIL PROTECTED] [EMAIL PROTECTED] wrote:
I'm looking for a MICOR UHF Repeater/Base Station
12-Watt 450-470 MHz PA
Deck, Motorola # TLE1683A. I have one of the 2-watt
versions of this PA,
which is just about identical except that there is
an attenuator that drops
the output power from
Does anyone have a schematic and/or board layout for the horizontal deflection board on a Cushman CE5? Just picked one up at a hamfest and the scope works but no horizontal deflection.
Art - KC7GF
Yahoo! Groups Links
To visit your group on the web, go
After decades of experimentation, combined with a 30-year engineering
career and Yankee ingenuity, Rob Vincent has invented a revolutionary
antenna technology. The distributed- load, monopole antennas are
smaller, produce high efficiency, and retain good to excellent
bandwidth. And they have
I was wondering if anyone has Worked With a EF Johnson 242-7172 UHF Mobile Radios ?
I need to Find Out Some Information On this Model Radio .
73's
Steve .
Yahoo! Groups Links
To visit your group on the web, go to:http://groups.yahoo.com/group/Repeater-Builder/
To unsubscribe
I work on them everyday.
Daniel
[EMAIL PROTECTED] wrote:
I was wondering if anyone has Worked With a
EF Johnson 242-7172 UHF Mobile Radios ?I need to Find Out Some Information
On this Model Radio .73'sSteve .
Yahoo! Groups Links
To visit your group on the web, go
Can These Radios be Used to Make a Repeater ?
Steve
Yahoo! Groups Links
To visit your group on the web, go to:http://groups.yahoo.com/group/Repeater-Builder/
To unsubscribe from this group, send an email to:[EMAIL PROTECTED]
Your use of Yahoo! Groups is subject to the Yahoo!
Daniel ,
Is there anyway you and I can Link Up Direct to talk about the EFJ-242-7172 Radios ?
Steve .
Yahoo! Groups Links
To visit your group on the web, go to:http://groups.yahoo.com/group/Repeater-Builder/
To unsubscribe from this group, send an email to:[EMAIL PROTECTED]
18 matches
Mail list logo