Neil: It sure would make a big difference. Metal = Mechanical and Plastic =
Transistorized.
Our age is told by the first types of test equipment we used. Mine was the
old Lampkin Dev. Monitor and Lampkin's Highly unstable frequency calibrated
VFO without the temperature comp.
Fred
W5VAY
-
Hello folks,
I'm in need of some help. I have ordered an Alinco DR-135TMKII which
has a DB9 connector on the back for packet. I saw this site
http://www.maxentropy.net/radio/amateur_radio.htm#top This person was
able to interface an NHRC 2 to the Yaesu FT1500M through the 6 pin
din plug on
Hello,
I've been going through all the repeater stuff I have acquired through
the years and came across a Repco Dimension Series UHF repeater,
WRN6UKE. It presently is on a 462T/467R split and I am wondering if
it will go to the ham bands, specifically a 440.8T/445.8R split. The
manual shows
On Sun, 06 Feb 2005 12:53:21 -, Anthony L .Ferguson wrote:
Pin 4 RX data
Pin 5 ground/sheild
Pin 7 PTT
Pin 9 Tx Data
So! Do you think I will be able to interface these two items together
Have you thought about how you are going to get the CAS
from the Alinco to the controller? I guess you
4 matches
Mail list logo
