John,
this can be done with the CE27 software from Vertex. Setting the
frequency boundaries and rx tuning are described in the 'CE27 EEPROM
Programmming Software Reference Manual - Supervisor Edition'. I
assume You have got this from Vertex since You are an approved dealer
for this
thanks for the info the only books we have on the 7000 is when the
repeater first came out. I will check on others today.
- Original Message -
From: Per Molund [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Friday, December 16, 2005 7:03 AM
Subject: Re:
Hi all, I have been fighting with a problem now for 2 days and must
be missing something! I have a micor repeater with a Station card
and a ICS controller and I am triggering the controller cos from the
Squelch Ind pin 5 on the old squelch gate board connector. I am
using the Ptt out to the
Sorry about the spelling! I did not check it on the last post. What I
have found is that when the transmitter is keyed the squelch Un-
squelched R1 Pin 5 on the gate card and down on the receiver J2 show
that the voltage disappears. Any suggestions? Steve
Yahoo! Groups Links
* To
Motorola ELPA Module Box Power Amplifier SGTF 1045A 859-894 MHz
I have questions - does anyone have answers?
All I know about this unit is that it's an expandable linear power
amplifier and designed for 869-894 MHz.
Seems like it puts out up to 600 watts - 4 transistors x150
watts/each and
I am having a slightly different issue with a unified chassis micor. In
bone-stock configuration, it works flawlessly, except that the transmitter
never drops, until I momentarily key the machine manually using the station
control card. Then all is well... it drops. Key it with an inbound
Still looking for a couple of Motorola Micor UHF
station KXN1052 channel elements.
If you have a couple that you'd sell me, please
drop me a note off-list.
Thanks de John
..
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
Search for bad PNP transistors.On 12/16/05, Mike Perryman [EMAIL PROTECTED] wrote:
I am having a slightly different issue with a unified chassis micor.Inbone-stock configuration, it works flawlessly, except that the transmitter
never drops, until I momentarily key the machine manually using the
John Burch wrote:
Still looking for a couple of Motorola Micor UHF
station KXN1052 channel elements.
If you have a couple that you'd sell me, please
drop me a note off-list.
If you cannot find any KXN1052A's, KXN1019B's will work in their place.
*To my knowledge* the only difference
Henry Radio Solid State Repeater Amplifier. 220 MHZ 1-5 in 100 out,
Rack Mount, Model C100B02R, Full Output, Good working order.
$400 + Shipping from West Coast 93420.
220 MHZ Repeater: Hamtronics Receiver and Transmitter. 223.14-224.74
w/Crystal Ovens, Rack Mounted. Super sensitive RX and
On 16 Dec 2005 at 20:41, Jerry Sanders wrote:
Henry Radio Solid State Repeater Amplifier. 220 MHZ 1-5 in 100 out,
Rack Mount, Model C100B02R, Full Output, Good working order. $400 +
Shipping from West Coast 93420.
Can we do any better on this price ? like inc shipping ?
any books ?
Anybody have some spare IPA decks from the Micor high power UHF stations.
This item is the panel mounted assembly which is connected to the input to
the PA assembly/deck.
We especially need the active RF amplifier(s)
Ed
Com / Rad Inc
Des Plaines, IL
Yahoo! Groups Links
* To visit your
I'm looking for a manual for my Motorola 1200AX service monitor. I
bought it from a fellow ham a few months ago, and the manual sat
underwater when his home was tragically flooded as a result of Katrina
(and poorly designed levees). He said it swole to phone book size and
the pages stuck
I have a manual, but it is not one I can part with. If you need specific
info I could scan/copy the section and get it to you. Copying the entire
manual would be cost prohibitive. 73,
Kevin K9HX
At 08:47 PM 12/16/2005, you wrote:
I'm looking for a manual for my Motorola 1200AX service monitor.
Hi Group
Can anyone help me?? I am wonting to put a link motorola Maxtrac on
my R1225 Repeater Useing the Link option that it has with the
Programming and I cant find any Info on useing the Link option
other than the help files. (The manual has nothing in it about this
That I can Find) What
Steve,
Do you know there is a ICS message board on Yahoo? Do a search on ICS under
Yahoo groups and you will find it.
Paul
WB5IDM
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of Ronnie Steve
Rice
Sent: Friday, December 16, 2005 9:51 AM
For those of you that have donated toward the upkeep of the Repeater
Builder Website, I take this time to thank you. I have tried to email a
response to everyone that has sent a PayPal donation, and I have sent
thank-you cards to those of you who have sent a donation in the mail.
Please
On Dec 16, 2005, at 1:41 PM, Jerry Sanders wrote:
Wacom 220 Duplexer Model WP652. 4 Cavity. Just removed from working
System. Half price at $400 + Shipping from West Coast 93420
Jerry WB6NYS .. Want HF Mobile Amp; Retiring and going RVing
Jerry,
If it's not already spoken-for, I'll
Yes I do Paul. The problem seems to be with the way I am connecting
the controller as it is being a real pain! Not sure it is the
controller yet but will have a good idea tomorrow or Sunday as I am
going to try an alternative. I am using Carrier squelch to test with
before hooking up a tn34
Hi all
Subject: CLEARTONE CM-7500 ( UHF MOBILE )
I would like to program this radio, can you help me ?
Merry Christmas
David - PU2PJT
GG66TA - Santos/SP/Brasil
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To
20 matches
Mail list logo
