Hello All,
Can anyone tell me if the programming cable for the M2E/M3 (TQ3356) is
just a straight DB9/DB9? If not, does anyone have a cable schematic
they could pass along?
Many Thanks 73
Jack
KR9Q
Hi does anyone have a used 2 meter repeater for sale cheap.I am trying
to set one up but this is all new to me.I have read several books but
of course they all are different on how to set up.Im not sure what
peice's i need any help appreciated.Thanks in advance.73's
Steve,
I did reply back to but obviously you failed to receive it.I quoted you
$100.00 +s/h..Let me know if you want it
Royce
- Original Message -
From: Steve
To: Repeater-Builder@yahoogroups.com
Sent: Wednesday, January 24, 2007 12:57 PM
Subject:
I'm pretty sure it is. I can check one tomorrow to be certain.
Joe M.
jack_kr9q wrote:
Hello All,
Can anyone tell me if the programming cable for the M2E/M3 (TQ3356) is
just a straight DB9/DB9? If not, does anyone have a cable schematic
they could pass along?
Many Thanks 73
Jack
Tell us how much money you expect to spend and the group can tell you what
you may be able to get for that amount. I'm assuming that you don't have
anything - no antenna, no feedline, no controller, no duplexer, no radio.
It sounds like you are looking for something that is all ready to go -
It is a straight through DB-9 serial cable.
Jamey Wright
Systems Analyst
Morgan County EMCD 911
Decatur, AL
256-552-0911
_
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of mch
Sent: Thursday, January 25, 2007 3:27 AM
To:
Now the 'rest of the story'...
I stand corrected in my misunderstanding of what went on,
and apologize for complaining in public when I was in error.
Ed
Ed Bathgate
Manufacturing Test Engineer
Marconi division of Ericsson
4000 Marconi Drive
Warrendale PA 15086-7594
(724) 742-6575
Fax (724)
Joe,
Thanks, I will look forward to hearing back from you.
Jack-
-- In Repeater-Builder@yahoogroups.com, mch [EMAIL PROTECTED] wrote:
I'm pretty sure it is. I can check one tomorrow to be certain.
Joe M.
jack_kr9q wrote:
Hello All,
Can anyone tell me if the programming cable
Recently, I asked you folks that are participating in the now lengthy
coordination thread to stop.
Now, I am TELLING YOU to stop, and reminding you that this list is not
for discussing coordination efforts, problems, or whatever.
Here is a group that will handle this type of discussion:
On Tuesday 23 January 2007 13:13, Dan Blasberg wrote:
Anybody have any opinions on LMR-1200 as feedline?
I have access to about 100' with N connectors at both ends, that I am
thinking of using for feedline.
Thanks,
Dan
KA8YPY
I'd say thats a neat deal and I'd use it. It's a little less
Tell us how much money you expect to spend and the group can tell
you what you may be able to get for that amount.
Works a good percentage of the time, but... As many of us know it's
quite possible to put a very cost effective repeater on the air for
very modest money.
And the converse
Yes, its a standard comm cable
Duane
AB8QU
jack_kr9q wrote:
Hello All,
Can anyone tell me if the programming cable for the M2E/M3 (TQ3356) is
just a straight DB9/DB9? If not, does anyone have a cable schematic
they could pass along?
Many Thanks 73
Jack
KR9Q
Hundreds of PL reeds available for Motorola radios. Most standard EIA tones
available, plus a few specials. Assorted part numbers for Micor, Mitrek,
Moxy, Maxar, et al including TLN8381, K1000, KLN6209, KLN6210, TLN6709, et
al. As you probably know, there is quite a bit of interchangability
Does anyone on the list have a service manual for the UHF Vertex VXR
7000 Repeater (#E-13689000) that they can part with or copy and mail.
Thanks in advance. N3DAB
On the cheap side, we just built a 440 repeater for about $500. The
tower space/hardline/antenna were already available, so we just had
to build the repeater and plug it in.
The repeater was a GE-Exec II base station off from e-bay for $100.
The built in power supply can run the unit at about
Tina wrote:
Hello all, this is my first post to the group here, so here goes.
I just acquired a Micor repeater with a CSI 32 Tone Panel, I am also
almost done with the ICS Basic contoller that I am building from a
kit.
My query is: can I use both? I need the CSI for PL tones and the
16 matches
Mail list logo