I have a pair of Micor channel elements. They have crystals installed
for 147.555 I'm asking $20 for the pair shipped. MO or PayPal accepted.
73, Steve N4IRS
Decibel Products was, for a while, selling Trilectric amps. I don't know
whether they actually bougt them out or if they were just reselling them. I
haven't seen them in catalogs or for sale new anywhere in probably 15 years.
I have a few of those amps but no manuals, sorry.
steve
i am interested
send me an email direct at
[EMAIL PROTECTED]
thnaks
gervais,ve2ckn
le bic,quebec
FYI the 1k test tonew you hear is actully a 1050hz
test tone that activates older recievers.
Larry,
The 'c' is missing in excerpt. Add the 'c' and it will work.
http://www.repeater-builder.com/motorola/r100/r100-programming-manual-excerpt.pdf
http://www.repeater-builder.com/motorola/r100/r100-programming-manual-exerpt.pdf
Ed Yoho
W6YJ
Hi Guys,
Well, I don't have many answers for you. I am new in this field and
trying to learn and am sharing what I have heard from others who claim
to have had this problem with a Mastr II. The gentleman at Pacific
Research who manufactures the controller has write up on this in their
manual
need something for 2 meter, .600 split email with what you have thx Terry
Thank you Ed. I copied it from an email. Sorry for the confusion.
Ed Yoho [EMAIL PROTECTED] wrote:
Larry,
The 'c' is missing in excerpt. Add the 'c' and it will work.
http://www.repeater-builder.com/motorola/r100/r100-programming-manual-excerpt.pdf
Doug wrote:
I want to be able to toggle the decode function on and off.
In other words select ctcss control or cor control. The encode
will be on all the time. It will be optional for users to
have ctcss on or off. It would be an advantage in down town areas.
Otherwise, your squelch is
A SAME test set.
http://www.catauto.com/sg2000.html
Good luck.
The harness uses a combination of 50 and 35-ohm cable. I've never seen any
specifications on actual lengths, just some measurements that were made by
Skip that would give you a ballpark length.
I agree, even with the precise measurements (if they were to be found),
weatherproofing
I might be looking to recrystal a Kendecom Mark 4. Is ICM still the best
place to go for xtals? What's a good set running these days?
Mike
WM4B
I once grabbed a *bad* DB420 from a local two-way dealer's bone yard.
The bottom of the main feed coax had been roached by lightning. But
the top half of the antenna was fine. The top half of a DB420 is
basically a DB408. It still works well to this day.
Laryn K8TVZ
--- In
--- In Repeater-Builder@yahoogroups.com, Chuck Kelsey [EMAIL PROTECTED]
wrote:
Good luck.
The harness uses a combination of 50 and 35-ohm cable. I've never seen
any
specifications on actual lengths, just some measurements that were
made by
Skip that would give you a ballpark length.
Hello
I've done harnesses for other brand dipole antennas in the
past... Does anyone know in stone what the Decibel DB-408
single dipole feed-point value is?
skipp
Chuck Kelsey [EMAIL PROTECTED] wrote:
Good luck.
The harness uses a combination of 50 and 35-ohm cable. I've never
seen any
15 matches
Mail list logo