Those loops as you refer to are actually inductors of a very small value.
They are in all intent a passive component. The size and shape derives the
inductance value. If you burned one out you were definately sinking some heavy
current, check your output transistors as you prob cooked at least
Watching at the e-mail box .
Is this like Charlie Brown downfield in the football game ...
waiting for the football from the quarterback?
... there is a Santa Clause, there is a Santa Clause ..
The Audacity of Capitalism at Christmas!
g. beat
w9gb
Yes Sir, I have it fused but when we first started we did not [just a short
while] When I got a fuse holder and put a fuse in it a 15 amp it blew it right
away. I had to go with a 20 is this a normal size for this machine
--- On Sat, 11/28/09, kevin valentino kevinvalent...@sbcglobal.net
I think I still have the repeater conversion article from 220 Notes
around here someplace. I did the conversion years ago for my first
repeater and it worked quite well. I can try to dig it out if anyone is
interested.
73, Joe, K1ike
Gary wrote:
The Midland 13-509 is spoken for.
Thanks
I lived up in Rome NY for a couple of years when I was stationed at
Griffiss Air Force Base. Six inches of snow only got a brief comment
during the local weather cast. They considered it a dusting.
73, Joe, K1ike
Chuck Kelsey wrote:
Tonawanda doesn't get near as much snow as a bit further
Hello,
This email message is a notification to let you know that
a file has been uploaded to the Files area of the Repeater-Builder
group.
File: /GLB Preselector/GLB_Preselector.pdf
Uploaded by : k1ike k1ike_m...@snet.net
Description : GLB Preselector docs supplied with preamp
As far as I know, GLB never made the schematic available.
I posted to the FILES area what I received with the preamps that I had
purchased over the years. I've used them on all three bands with good
luck. Skipp was trying to reverse engineer one I sent him.
73, Joe, K1ike
DCFluX wrote:
I have that information and I did reverse out the
diagram portions I was interested in detailing,
which are the different bias schemes for the
different active devices.
I'll happily make that information available when
I locate that buried folder. Today might be a day
to slightly clean up
On Nov 25, 2009, at 9:53 PM, ke5hbb wrote:
To the group I am new at building ,with the help of a friend we put together
a uhf mobil. at 45 watts out I had a problem with the pa . A small copper
loop beside the power adjust pot. burned thru the board and took out a cap.I
was able to get it
Dave,
Please advise the part number of the PA board, usually stamped in black ink
along one edge of the board. It's difficult for us to help you, if we don't
know exactly which PA board you have.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
Yep, pretty much a non-event.
Chuck
- Original Message -
From: Joe k1ike_m...@snet.net
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, November 28, 2009 9:42 AM
Subject: Re: [Repeater-Builder] Re: The GLB Preselector- Preamplifier
I lived up in Rome NY for a couple of years when
He sent me the combo number off list. He has a standard UHF 100W mobile.
On Nov 28, 2009, at 9:54 AM, Eric Lemmon wrote:
Dave,
Please advise the part number of the PA board, usually stamped in black ink
along one edge of the board. It's difficult for us to help you, if we don't
know
He sent me the board number off-list (19D423006G6), which is covered by
LBI-30201, here:
www.repeater-builder.com/ge/lbi-library/lbi-30201g.pdf
Dave is operating the radio at 441.900 MHz. Dunno what mods have been made
to optimize operation outside of the 450-470 MHz design band.
73, Eric
Need an Audio section of Master II, Please let me know how much is postage.
Fred N2NSS (73)
--- On Thu, 11/26/09, bil.isom bil.i...@yahoo.com wrote:
From: bil.isom bil.i...@yahoo.com
Subject: [Repeater-Builder] MASTR II pieces / parts
To: Repeater-Builder@yahoogroups.com
Date: Thursday,
Input, output or both?
Joe
skipp025 wrote:
The termination
Z (impedance) actually seen by the preamplifier does
affect the IMD. How much and where is what we hope
to get a better look at.
s.
Might you have a new style control shelf ? manual for same ? Jerry W8KQ
zip-49707
--- On Sat, 11/28/09, Fred Esteves estev...@yahoo.com wrote:
From: Fred Esteves estev...@yahoo.com
Subject: Re: [Repeater-Builder] MASTR II pieces / parts
To: Repeater-Builder@yahoogroups.com
Date: Saturday,
both... we already gone through some of it
and sorting the results is a lot of work.
s.
Joe k1ike_m...@... wrote:
Input, output or both?
Joe
skipp025 wrote:
The termination
Z (impedance) actually seen by the preamplifier does
affect the IMD. How much and where is what we hope
Hello,
I have a card that came out of a VHF MSR2000. I can't seem to find any info on
the card. Google, etc came up blank. Does anyone know of this card, whats it
is used for or is it junk for HAM use?
The only thing on the card that identifies it is printed to the left of the
white T
- Original Message -
From: Joe
I still have the repeater conversion article from 220 Notes. I did the
conversion and it worked well. I can dig it out, if anyone is interested.
=
Hi, Joe ~
Yes, I'm very interested in that article. Please share it
Hi,
Putting up a UHF VXR-7000. I'll need a controller to allow DTMF remote
operation and control, Anyone have a used one they might want to sell?
Please email me offlist. mycalls...@earthlink.net.
Thanks,
Alan WA2AR
Hi Bill,
I'm looking for a pair of Audio/Squelch boards to get our UHF and a VHF
machines back on the air... The 11.2Mhz variety. Got anything like this
available??
Dave - N0TRQ
On Thu, Nov 26, 2009 at 5:19 PM, bil.isom bil.i...@yahoo.com wrote:
I have recently received several partial
Hello all...wondering if anyone has sucessfully moved a VHF (150mhz) DB-224 to
the 220mhz ham band? Anyone have pics or info on it? I have to measurements,
just wondering if it has been done and worked? Thanks!
Steve KD8BIW
KD8BIW/R 224.580 PL 110.9
Widowville, OH
22 matches
Mail list logo
