As of April 13, 2010 the updated http://www.repeater-builder.com page works
fine for me.
It took me a few seconds before it redirected to
http://www.repeater-builder.com/rbtip/ page.
73,
KD6AAJ
I prefer the Dayton 24 vdc fans, but feed them with 12 vdc. That way they
are more quiet and they will last for quite some time. Get the good
ball-bearing fans to extend fan life as well.
We use them to cool our exciter radios and PA's at our sites and have not
had one fail yet in 6 years. If
Anyone have a brand they recomend for a no noise, reliable fan.
I didnt know whether to go with brushless,ball bearing,AC, or DC etc.
Also should the power leads be sheilded and have a separate supply if DC..
Any filters recomended also..
This is my first repeater and am now into the
Anyone have a suggestion for a less expensive alternative to the standard
Motorola power cord?
lh
tks, eric, but i was just confirming the correct description of the pin. i am
very familiar with z38max . i have 15 in actual use!!
73
jose
--- On Tue, 4/13/10, Eric Vincent eric...@telus.net wrote:
From: Eric Vincent eric...@telus.net
Subject: RE: [Repeater-Builder] Zetron Controller
Hi All,
I am in a situation that I need some advice on implimenting an access DTMF tone
for you repeater.
So far.
We have installed a CTCSS tone on the RX of our repeater, and have been asked
How does one access it if they don't have CTCSS onboard?
Should mentioned the repeater is open, the
Not really. Even though it costs about $16, I think that kit is a good
value for what you get: Color-coded heavy-duty high-temperature wires (14
AWG) that are long enough to reach the battery- even with a Charge Guard in
line- and with an inline fuse and equipped with the proper plug on the
I agree, Eric, but I need 30 of them, so even a slightly lower price will be
good. I've found only 1 on Ebay, so I may buy one just to see what the
quality
is like. And the Moto stuff is probably made in China anyway.
lh
On Tue, Apr 13, 2010 at 9:22 PM, Eric Lemmon wb6...@verizon.net wrote:
Item number: 270549058766 at eBay.
JT
Asunto: Re: [Repeater-Builder] DC power cord HKN4137A
I agree, Eric, but I need 30 of them, so even a slightly lower price will be
good. I've found only 1 on Ebay, so I may buy one just to see what the
quality
is like. And the
Seems to me that someone once mentioned that you must use crimp connectors on
aircraft...???
not sure if that is true
I have mentioned that with regard to regular wire, not coaxial cable. The
logic behind that is that when a wire is tinned and the solder wicks up past
the
E bay item 270549058766, I have brought from this seller and they are Motorola
cables, Have not had any trouble with them, fast shipping
--- On Tue, 4/13/10, la88y llhorl...@gmail.com wrote:
From: la88y llhorl...@gmail.com
Subject: [Repeater-Builder] DC power cord HKN4137A
To:
Hi group, I have sitting on the shelf a 10 channel Aerotron community PL board,
with 6 boards. If someone can put it to use, it is yours for shipping from las
vegas, email me at w9sth @ cox .dot. net
12 matches
Mail list logo
