Dave,
I thought I'd do a bit of investigation using the rough VSWR numbers you
provided earlier, and here is what I calculated with my trusty Smith Chart and
calculator:
1) the length of the o.c.coax (I used RG-214/U in my calculations) you used on
your 1st try to reduce the VSWR to 1.5 was
Dave,
You're probably right that the new location probably makes up for a lot.
Have you been able to confirm that the antenna still works up at it's
rated freqs?
How much feedline loss are you dealing with? Most 'good' sites have
significant feed line runs and therefore loss. While I
Hi Guys:
Does anyone have any experience with the Marconi 2955B
test set? My IFR 1500 is getting old, and I can get a
2955B for a good price. I think I'll miss the analog
meters, but I'm sure I could get use to the big CRT.
I'd appreciate any feedback.
Tedd Doda, VE3TJD
Lazer Audio and
Anyone have a TRF1032A that they would like to sell / part with. I'll
take it with or without the housing, whichever is easiest for you to unload.
Thanks in advance!
Adam N2ACF
feu...@optonline.net
It would be a great investment I have 2 (2955) a 2955, and a 2955A so the
2955B is much later beast than my 2 2955's I wish I had bought a 2955B or
2955R.
Take care that's all I can say for now.
v44kai.Joel.
- Original Message -
From: Tedd Doda la...@sentex.net
To:
Im wondering of Motorola Radius 1225 series RSS version r02.00 will program
the GR1225 series repeaters.
Does anyone have any idea?
Thanks.
It will unless it's one of the later radios, then you might need the 3
version...4 version is the same as 3 but for XP OS.
rush8001 wrote:
Im wondering of Motorola Radius 1225 series RSS version r02.00
will program the GR1225 series repeaters.
Does anyone have any idea?
Thanks.
I have a pair of 2C ICM compensated icoms on 70cm ham. they have not been used
and are still in the bags that ICM put them in. RX is 449.525mhz TX is
444.525mhz. email me off list at do...@_engineeringinc_._com (remove the _'s
in the email address) if you are interested and we can work
Doug,
I finally found my commercial license but I don't know how to look up the GROL.
How did you do it?
Can you paste the link where this is? Then, where do you add that call sign to
the FRN #
TIA,
Don, KD9PT
- Original Message -
From: Doug Bade
To:
There is a great set of apps that illustrate the Smith Chart on the web:
http://www.fourier-series.com/rf-concepts/smithchart.html
This illustrates the use of a stub:
http://www.fourier-series.com/rf-concepts/flash_programs/SmithChart3/smithchart3.html
of course knowing where to put a stub and
Don,
Go here:
http://wireless2.fcc.gov/UlsApp/UlsSearch/license.jsp?licKey=2109328
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Don Kupferschmidt
Sent: Monday, May 10, 2010 3:18 PM
To:
Hi All and thanks in advance
I am trying to build a repeater using the SRM9000 however I have come across a
stumbling block
Using the document A9K-501
(http://www.tmcradio.com/TMC_Files/Mob_AppNotes/A9k-501_Simple_Repeater_V103.pdf\
) Simplest repeater using serial crossover cable I've
Looking for a manual for this DC remote.
Thanks for any help.
BTW: Plan is to use it with a MSR2000 repeater.
Eric,
The obvious question is:
How did you find it??
Thanks for all you've done,
Don, KD9PT
- Original Message -
From: Eric Lemmon
To: Repeater-Builder@yahoogroups.com
Sent: Monday, May 10, 2010 7:55 PM
Subject: RE: [Repeater-Builder] if you have a commercial licenses
Eric,
One last question, how do you add it to my FRN #.
Thanks,,
Don, KD9PT
- Original Message -
From: Eric Lemmon
To: Repeater-Builder@yahoogroups.com
Sent: Monday, May 10, 2010 7:55 PM
Subject: RE: [Repeater-Builder] if you have a commercial licenses check it on
the
15 matches
Mail list logo
