You might want to inspect your connectors first to see if you have any
moisture going into the connectors good Amp connectors help out
with extremes. Used to have a repeater in NYC. When it snowed or got
wet, it squealed and grunted with 9914. Swapped out the old cabe to
the good stuff Heiiax
There are plenty of other antennae that would fit the bill. Just look for a
quarterwave antenna.
Adam Kb2jpd
On Sat, Nov 1, 2008 at 2:27 PM, n8rtn [EMAIL PROTECTED] wrote:
Hi,iam looking for a Original htx-202 rubber duck ant any one have one?
thanksN8RTN..Mike
it is a good idea to review the most current copy of Part 97. The ARRL
book is excellent for that.
As for using the WiFi router for Repeater control, you would have to
lock it down very well, use special firmware, or some non-ham script
kiddie will attempt a DoS attack (denial of service). You
I just made my own using carbon resistors and a little practice doing some
soldering inside confined spaces. The terminator/adaptor does not make any
SWR bumps but it is your wish.
Adam Kb2jpd
On 6/20/07, skipp025 [EMAIL PROTECTED] wrote:
Hi Joe,
It's what I'm doing now... but I do have
It is probably tempororay until the Chinese debris is accounted for. The
military is interested in knowing what kind of mechanism is used for the
anit-sat system.
Adam Kb2Jpd
On 5/15/07, Nate Duehr [EMAIL PROTECTED] wrote:
On May 14, 2007, at 2:13 PM, Rick Parrish wrote:
Chuck Kelsey
You should consider using one of the old HP handheld PCs. It uses the old
tech and it comes with a comport. Friends of mine have been using it with
the old RIB software and its work fine with it. FYI.
The lightning did create some damage. Since you are stating it is in the
receiver, you will have to check the antenna , the feedline, and any
ancillary components connected to the former.
If you did not have any lightning protection, then either the antenna or
one of the connectors arced over
JOHN MACKEY wrote:
It seems to me that this group has had discussions before about Winegard TV
pre-amps causing wide-band RF noise. Does anyone know if there is a good
model of TV pre-amp that works for the job intended but does not cause the RF
noise?
thanks
Try Motorola. They are
atms169 wrote:
I want to attempt to setup a Digital Repeater on VHF using the Icom
IC-2200H with optional board.
I would like the D-Star system but, Hams here seem to avoid paying for
that kind of money. So I would like to compensate and try something
different.
Has anyone ever
Gary wrote:
I am looking to build up a low powered portable repeater.
Using a couple of HT's. Is there any very basic (with ID) controller
out there to handle speaker out audio and generate its won COR and PTT
Gary
Did you start with Google? :
Chuck Kelsey wrote:
Maybe I'm missing something here, but I've never subscribed to the theory of
having fans run beyond PTT. What purpose does it serve? The transistors are
generating heat only when they are on. As soon as they are off they
begin to cool down on their own. If the fans are
Usually, you use a backbone frequency on a different band (in the US 220 Mhz
up) or a dedicated dc controlled phone line so you can have the desired linking.
It is difficult, but not impossible, to link on the same band. Is that you will
thinking of implementing.?
Adam Kb2Jpd
-Original
Hello all from Adam Kb2Jpd
Just returned from the Timonium Hamfest over at the Maryland
Fairgrounds in Maryland. It was a decent size hamfest and there was
plenty of stuff to buy, swap and take home.
There was the eBay effect - I call it when a vendor is selling a item,
and had priorly
How about horizontal spacing and changing the polarization of one of the
elements? If he does it right, that can work.
Another thing is to use a remote receiver and pipe it in thru microwave or 800
Mhz.
Adam Kb2jpd
Adam Kb2jpd
-Original Message-
From: Eric Lemmon [EMAIL PROTECTED]
-Original Message-
From: n2len [EMAIL PROTECTED]
Subj: [Repeater-Builder] Remote base radio help...
Date: Tue Feb 7, 2006 2:03 pm
Size: 1K
To: Repeater-Builder@yahoogroups.com
Hello,
I am presently hooking ua remote base radio to my vxr5000. The 5000 COS
needs a contact
15 matches
Mail list logo