time, plus I don't think I need
much information really, since the new target frequency is not much higher than
the original frequency and may not need retuning. It's for a beacon
transmitter, so RX tuning isn't necessary.
Jeff KP3FT
--- On Wed, 9/8/10, George Henry ka3...@att.net wrote:
From
Hi George,
If you don't mind going to the trouble, that would be great. Just verifying if
the pin number/functions are the same as the Moxy would be good because I
already have the Moxy pinout.
73
Jeff KP3FT
--- On Wed, 9/8/10, George Henry ka3...@att.net wrote:
From: George Henry ka3
it was finding a suitable 10-meter beacon
transmitter! Learning a lot in the process though, that's a good thing...
73
Jeff KP3FT
--- On Sun, 8/29/10, Eric Lemmon wb6...@verizon.net wrote:
From: Eric Lemmon wb6...@verizon.net
Subject: RE: [Repeater-Builder] dumb question: what is purpose of lock on
Mitrek
anomalies as a first
pass.
--- Jeff WN3A
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Jeff KP3FT
Sent: Sunday, August 29, 2010 1:16 PM
To: Repeater-Builder@yahoogroups.com
head, so I need to use the
front panel pins, but if the radio is locked, I may end up getting
nowhere and still not know if it's either the radio that is bad, it
is locked out, or I wired it wrong. This is the first Mitrek I've
had. Thanks for any help.
Jeff KP3FT
http://www.repeater
5 matches
Mail list logo
