Guys
I did order the ID-O-Matic and installed it. The only thing is such trash
with square wave output so built a little audio filter to smooth things out.
That is more pleasant to listen too. Yes cw can be pleasant.. Also
users who complained of no beep now have it.
Thanks
WA0VUS
Larry
I just wanted to thank everyone for the many responses to my inquiry about
cwid. Now comes the tough part of making the decision which way to
go. The wealth of knowledge of this group is amazing.
Thanks again
WA0VUSLarry KemperMuscatine, Iowa
[EMAIL PROTECTED]
Yahoo! Groups
Just was wondering what cwid is available new or used. I am in need
of a cwid for one of my repeaters. I normally use the hamtronics diode
matrix unit but they do not have them any more. I have a RPT10 on the air
that needs some identification so if anyone knows of one for sale or has any
I agreeI have 2 R100's that have been
upfor years and they just keep working. I bought 2as tech
specials for parts and have not used them. If anyone is interested in a
tech special R100 I can make them a deal. They will make the trip to Princeton
Ill hamfest this year.
Have a safe one.
Anyone have access to a schematic for the D44 UHF Motorola Mostar mobile
PA?I cut one up for an amp and need to figure out where it all goes.
Thanks
WA0VUSLarry KemperMuscatine, Iowa
[EMAIL PROTECTED]
Yahoo! Groups Links
To visit your group on the web, go
The ones on this list are just as much to blame.
If you did not respond to this person he would naturally disappear.
So on to repeater stuff.
WA0VUSLarry
Yahoo! Groups Links
To visit your group on the web, go to:http://groups.yahoo.com/group/Repeater-Builder/
To
Brent
The PT8874 is 40 watts out and has a gain of 4.5 db
according to my old TRW listing. Should be able to figure that one out but
I gave up on math like a bad girl friend years ago.
WA0VUSLarry KemperMuscatine,
Iowa
[EMAIL PROTECTED]
Yahoo! Groups Links
To visit your
Brent I found another brochure that says 12 watts
in for 40 watts out.
WA0VUSLarry KemperMuscatine,
Iowa
[EMAIL PROTECTED]
Yahoo! Groups Links
To visit your group on the web, go to:http://groups.yahoo.com/group/Repeater-Builder/
To unsubscribe from this group, send an email
Anyone have any idea what length of coax I should run from the transmitter
and receiver to the duplexer? I have a Sinclair Q2220E and freq of 147.225
Transmit.
Any info about this will be greatly appreciated.
Thanks in advance.
WA0VUSLarry KemperMuscatine, Iowa
[EMAIL PROTECTED]
Hi
I am in need of a Micor base/Repeater cabinet if anyone has one. Let me
know price if you do.
Thanks
WA0VUSLarry KemperMuscatine, Iowa
Yahoo! Groups Links
To visit your group on the web, go to:http://groups.yahoo.com/group/Repeater-Builder/
To unsubscribe from this group,
I am still in need of a manual for the Standard repeater model RPT-10
if anyone has one or a copy for sale.
I cut the amp deck from a 110 watt Mitrek and had to pad it down to run 65
watts. Added a couple of fans and it has survived 45 minutes into a
load. Just need the tuning
Brent
Thanks for the directions that will get me started
on the tune-up. Any idea what the pots are on the control
board?
Thanks to Skipp also.
WA0VUSLarry KemperMuscatine,
Iowa
Yahoo! Groups Links
To visit your group on the web, go
Thanks but I have tried several emails to Teal over the last 2 months with
no answer to any of them. I will keep looking as someone must have a manual
for the Standard RPT-10 in a drawer.
Thanks
WA0VUS
Larry Kemper
Muscatine, Iowa
Yahoo! Groups Links
* To visit your group on the web
Thanks Skipp I will have to make a note to remind me of your note to email
you.
WA0VUS
Larry Kemper
Muscatine, Iowa
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send an email
14 matches
Mail list logo