.
Here's your chance to have some fun if you're so inclined. There are at
least a couple of web sites devoted to scamming the scammer. Read about
it at http://bustedupcowgirl.com/scampage.html and http://www.419eater.com.
Roger Grady K9OPO
invisible antennas?
Roger Grady K9OPO
At 03:02 PM 12/12/2006, Dave Schmidt wrote:
In the wav file is that white noise or data bursts before and after
the dtmf?
Sounds like very weak packet bursts to me.
Roger Grady K9OPO
At 04:41 PM 12/12/2006, Roger Grady wrote:
Sounds like very weak packet bursts to me.
I looked at the sample with a waveform editor (Audacity) - there's
definitely data riding on the 100Hz tone, at around 5-10% of the 100Hz
deviation. It looks like it continues during the DTMF bursts also
At 10:55 PM 2/6/2006, Paul Finch wrote:
Kevin,
Sorry to bother you again but where do you get these Toshiba S-AV15 modules?
I did a Google search and did not really find anything.
$49.95 at RF Parts.
http://www.rfparts.com/module.html#sav6
Roger Grady K9OPO
Yahoo! Groups Links
to 100 at the other end, two
of those in parallel at the T gets you back to 50 to match the feedline.
Any number of receivers other than 'powers of 2' is more complicated. This
does nothing for the loss of course.
Roger Grady K9OPO
Yahoo! Groups Links
* To visit your group on the web, go
thousand feet down but only a few
miles away horizontally can be a problem without downtilt. I don't think
there are any towers tall enough in Indiana.
Roger Grady K9OPO
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder
- you never can tell when your in Dayton
16 - Despite all this try to have a fun time.
LOL!
With the exception of #12, I think I've needed/seen everything on the list
at one time or another
Roger Grady K9OPO
Yahoo! Groups Links
* To visit your group on the web, go to:
http
between the receiver and the duplexer? A 3db pad should reduce the
sensitivity by that amount, but if there's a severe mismatch the
sensitivity might stay the same or actually improve with the pad.
Roger Grady K9OPO
Yahoo! Groups Links
* To visit your group on the web, go to:
http
not sure, but my guess would be to use the same spacing as between the
elements on the individual antennas. With your varying dipole orientation
and distance from the tower you'll probably get an interesting pattern.
Roger Grady K9OPO
Yahoo! Groups Links
* To visit your group on the web
. Any
other length and anything other than an open or short requires calculation
for the exact length, frequency, and coax impedance to determine the
resulting impedance.
Roger Grady K9OPO
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group
be technically true, but I wouldn't want to bet on the
effectiveness of the argument to an officer who didn't like the idea of you
listening to police traffic.
Roger Grady K9OPO
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder
, I
don't know its heat transfer properties but I'd bet they aren't very good.
Roger Grady K9OPO
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send an email to:
[EMAIL PROTECTED
with a 28.8k dial-up.
Roger Grady K9OPO
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
* Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com
- gain over a mythical
worse-than-isotropic reference).
Only partly :-).
Roger Grady K9OPO
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
* Your
I have a few questions about the mechanics of operating a list such as
this. Could one of the moderators email me direct if you're willing to
answer some?
Thanks a bunch.
73,
Roger Grady K9OPO
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com
section
will transform the 50 ohms to 100 ohms. These 2 100 ohm points are T'd,
giving 50 ohms for the main feed.
The above seems easier than using the hard-to-find 35 ohm coax but there
must be other factors I haven't thought of that caused Decibel Products to
use it.
Roger Grady K9OPO
Yahoo
once
when I was and during the test, the alert lights were not illuminated. I
assume all radios would work the same but I can't say for sure. My radio is
a Radio Shack (Tech America brand), SAME capable.
One other comment - the 1050hz tone is 8 seconds long.
Roger Grady K9OPO
Yahoo
not always be that demanding in that regard. But
personally I think Heliax or equivalent is worth the price.
Roger Grady K9OPO
Yahoo! Groups Links
To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
To unsubscribe from this group, send an email
19 matches
Mail list logo