Re: [Repeater-Builder] Re: Looking for connectors

try [EMAIL PROTECTED] cheap and fast. - Original Message - From: nj902 [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Tuesday, December 30, 2003 7:56 PM Subject: [Repeater-Builder] Re: Looking for connectors --- In Repeater-Builder@yahoogroups.com, Jeff DePolo WN3A

[Repeater-Builder] TK809 COS location

anyone know where I can pick off for dtmf decode squelch signal on a kenwood tk809, i dont have schematics. Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to: [EMAIL PROTECTED]

Re: [Repeater-Builder] Diamond X-500 for repeater use?

I have 3 diamond hnaX510's and consistantly can reach about 75-100 miles in every direction with the antenna about 30 foot to the bottom of it, (roof mounted) I compared it to a 8 element beam and it was almost the same signal strength as the beam except it worked in all directions. I have never

Re: [Repeater-Builder] Interesting scam

when i worked at Collins radio in texas they spend a fortune to develop a secure terminal with super high encryption on the connection and the data terminal itself BUT there was this guy that took it upon himself to build a receiver that could pick up the signals going to the moinitor and

Re: [Repeater-Builder] Diamond X-500 for repeater use?

i compared it to a telex hy-gain 8 element vertically polarized of course... I dont remember the exact model number but it was the one with the delta match coax stub. - Original Message - From: Ralph Mowery [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Monday, December

[Repeater-Builder] tk-809 programming

Anyone know if the tk-809 kenwood mobiles can be programmed thru the front keys? if not anyone have a schematic of the correct programmer for this little radio? thanks KF7NN Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ To

[Repeater-Builder] Wacom WP-739

I have a set of wacom WP-739 cans and was wondering if anyone has any experience with them for ham use, they have the external tuning stubs on the side and knobs on top. are they suitable for 600kc split on vhf or will i need more isolation say at 50 watts from a mastr II.?? thanks. KF7NN

Re: [Repeater-Builder] Wacom WP-739

Kevin Custer wrote: george vagner wrote: I have a set of wacom WP-739 cans and was wondering if anyone has any experience with them for ham use, they have the external tuning stubs on the side and knobs on top. are they suitable for 600kc split on vhf or will i need more isolation say at 50