[Repeater-Builder] Power Amplifier Info Needed

Does anyone have any info on a TPL PA3-1FE power amplifier. I have one that I need to put on our local amateur radio repeater but it needs to be tuned down to our repeater frequency. I am looking for the tuning procedure on how to tune this unit. Thanks Jay

[Repeater-Builder] Looking for information

I am looking for any type of manual for an ICM VS2000 repeater controller. Our club has inherited a repeater with one of these controllers and we need to change some options on it, like the repeater ID, hang time, ect. Any information would be appreciated. Thanks Jay - K5GUD Yahoo!

[Repeater-Builder] COS for GE Phoenix -SX

Does anyone know if and where you can get an active COS signal on a GE Phoenix-SX mobile radio? Thanks J Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL

[Repeater-Builder] GE MVS Information

I am looking for the pinouts of the microphone connector on a GE MVS VHF UHF radio. I am also looking for a place to tap into the COR line on the GE MVS radio. I want to take two radios, one for transmit and one for receive, and make a repeater out of it. Has anyone had any experience with

[Repeater-Builder] Re: Inverting COS

the simplest way to do the job. I was trying to make it harder than it was. The problem with growing up in the digital world. Again thanks to all. J --- In Repeater-Builder@yahoogroups.com, jay_kruckenberg [EMAIL PROTECTED] wrote: I have a Motorola radio that has an active low COS signal. I

[Repeater-Builder] Inverting COS

I have a Motorola radio that has an active low COS signal. I need this to be an active high COS signal. Does anybody know how to build a simple circuit that will invert the COS signal from a low to a high signal? Thanks J Yahoo! Groups Links * To visit your group on the web, go

[Repeater-Builder] Repeater Identification

Can someone help me settle a debate among some of our club members? Is it legal to ID our club repeater using our club callsign? The trustee of the repeater and the trustee of the club callsign are two different people. I can't find anything about it in the rules and regulations. Right now

[Repeater-Builder] Problems tuning GE Mastr II exciter

I am having problems getting my GE Mastr II VHF exciter to tune properly. All goes well until I start tuning T110. I have my meter on pins 5 (-) and 6 (+) but get no reading at all. I have adjusted T110 all the way through but still see no reading. When I ground my meter to chassis ground I