It would be a KLN6210A Micor PL Encode Reed
--- In Repeater-Builder@yahoogroups.com, Mike Morris wa6...@... wrote:
At 09:30 AM 09/07/10, you wrote:
Anyone help me out with this part?
Terry
wx3m.te...@...
What model number?
There are several different physical packages.
If you
I used a GE Phoenix for the RX and a Delta (very similar radio) on TX for a
GMRS repeater for a while. Worked Excellent. Ran a 100 watt Delta (at 40 watts
with no problems. Lashed them together with a NHRC-2 and it sounded great. I
did run 2 5 fans on the cooling fins of the Delta. It was up
DSTAR is totally foreign to me. I can't think of anyone in the immediate area
that even has a DSTAR capable radio.
We are experiencing some interference on the input to one of our club
repeaters. What baffles me is that the repeater is in PL (123.0). Is it
possible that a DSTAR user in a
I'm about to interface a ACC RC-85 to a VHF Mastr II Repeater (station, not
mobile) Do I understand correctly that although in most cases, you would
remove all cards except the 10 volt regulator, with the ACC you must leave the
Repeat Audio card in to get squelch gated RX audio?
If so, does
Zimmerman
Amateur Radio Call N3XCC
474 Barnett Road
Boswell, PA 15531
terry_wx3m wrote:
I'm about to interface a ACC RC-85 to a VHF Mastr II Repeater (station, not
mobile) Do I understand correctly that although in most cases, you would
remove all cards except the 10 volt regulator
Looking for a Mastr II VHF station 75W or up continuous duty PA. I only really
need the casting, so if you have one with a bad amp, I would take that.
wx3m.te...@gmail.com
@yahoogroups.com
Sent: Tuesday, June 15, 2010 1:14 PM
Subject: [Repeater-Builder] Re: MII station PA VHF
Where are you? I have a bad one in Dayton, OH
Randy
--- In Repeater-Builder@yahoogroups.com, terry_wx3m wx3m.terry@ wrote:
Looking for a Mastr II
I have an orphaned transceiver in a wall mount cabinet. I can't crack the model
number to see where I should start looking for LBI's to tune the thing. It's a
neat package that I would like to use for a remote receiver.
It's a weird animal. Looks to be a late model Mastr Pro
Combo is WK56RAU66
is here..
http://www.repeater-builder.com/ge/product-code-indexes/index-pc63-royal-executive-station-cip.pdf
Operator manual = LBI3516
Installation manual = LBI3740
Maint manual = LBI4451
Tone manual = LBI4143
--- In Repeater-Builder@yahoogroups.com, terry_wx3m wx3m.terry@ wrote
I have some Micor mobiles on 31 MHZ 100 Watt would make dandy 10 meter radios.
Yours free for the shipping,
--- In Repeater-Builder@yahoogroups.com, Doug Hutchison specialq@...
wrote:
Hi Andrew,
Initially thank you for announcing the new box - cannot find it here
yet. Have a DR-M03
I can't stress enough that a properly done Micor will out perform anything
new. Contact n3...@repeater-builder.com for options. It's not a just shameless
plug that I recommend him. I am an hour away from his shop and have observed
his attention to quality and detail. I have a Micor station on
A gentleman I help with his repeaters has a MSR-2000 on 147.240. It has the
intermittent duty PA, but is only being run at 50 watts. Verified no SWR into
the cans. Two fans on the PA, one blowing in the side of the cabinet and one
sucking out the other side. It keeps cooking PA's.
Has anyone
On a long shot, before I order ONE crystal, does anyone by any chance have
either a GE Mastr II Icom for 144.730 RX or crystal on 14.837 for Mastr II,
Exec, or MVP ??
Terry
wx3m.te...@gmail.com
Do yourself a favor and send the receiver and $100 to Scott
n3...@repeater-builder.com. Then you will have a receiver that is in the
131-150 range. It is worth EVERY penny. It will exceed book specs.
--- In Repeater-Builder@yahoogroups.com, Tim - WD6AWP tisaw...@... wrote:
I have the
Anybody have the programmer for this radio? Andy Brinkley is not answering
emails. It's already converted to A range. Just need the module programmed.
Terry wx3m.terry atgmail.com
I recently took 2 UHF machines off the air.
I have for a Mastr II 1 5C on 442.050 and 1 EC on 447.050. These were custon
built by Bomar crystal at a cost of $35 each plus shipping and are temp
compensated. Send me $40 and and I will send them to you.
Also for Micor, I have a KXN1052A on
--- In Repeater-Builder@yahoogroups.com, terry_wx3m wx3m.te...@... wrote:
I recently took 2 UHF machines off the air.
I have for a Mastr II 1 5C on 442.050 and 1 EC on 447.050. These were custon
built by Bomar crystal at a cost of $35 each plus shipping and are temp
compensated. Send
GE are sold to Bill
Moto are sold to Tony
Pending paypal
Thanks
--- In Repeater-Builder@yahoogroups.com, terry_wx3m wx3m.te...@... wrote:
I recently took 2 UHF machines off the air.
I have for a Mastr II 1 5C on 442.050 and 1 EC on 447.050. These were custon
built by Bomar crystal
Can anyone burn me a channel prom (one frequency) for the original Syntor? I
would like to use this for a remote receiver. Thanks, Terry
wx3m.te...@gmail.com
One of the owners of this list will convert a MII or Micor into a very high
quality 220 repeater for you at a fair price for the quality of workmanship.
contact n3...@repeater-builder.com
--- In Repeater-Builder@yahoogroups.com, surf_boy82 surf_bo...@... wrote:
Hi Group,
Looking to
GE Versatone 118.8HZ anyone have?
w...@ymail.com
I am looking for the wiring harness for the S-800 series Control head. Not the
large cable, but the smaller harness with the ignition sense wire, speaker etc.
Thanks
wx3m.te...@gmail.com
I know there is an Aerotron group, but it hasn't had any activity for a long
time. I thought I might get an answer here.
I have a mint Aerotron VHF Repeater made of a 60BR1 Receiver and a 60BT100
Transmitter. Has anyone ever seen one of these successfully moved to a lower
ham pair such as
An opportunity arose for me to get in a site that would serve me well. Time was
of the essence (before they changed their mind) Financially, it just happened
to be a time where I didn't have the funds for 7/8 Andrews. I was able to get a
LMR-400 Chinese equivalent for dirt cheap. This got the
Anyone want to sell an extra Mastr II Key?
wx3m.te...@gmail.com
25 matches
Mail list logo