At 5/11/2008 14:33, you wrote:
I would like to add a control receiver to a UHF (446 MHz) repeater. So,
is there a
way that I can use the repeater antenna for both the repeater and the
control receiver?
John AF4PD
Sure, if your input control RX freqs. are close enough. I have 2 sites
I would like to add a control receiver to a UHF (446 MHz) repeater. The
repeater is at a hospital that has allowed us to put up the repeater
antenna but is very hesitant to permit additional antennas. So, is there
a way that I can use the repeater antenna for both the repeater and the
control
John,
For a UHF control receiver one solution is to parallel another recevier
a channel away from your repeater input using a splitter for the 2
receivers using the same feed from your duplexer.
Most duplexers have notch 100 kHz or so wide so it will work for both
receivers. Know this
At 5/11/2008 14:33, you wrote:
I would like to add a control receiver to a UHF (446 MHz) repeater. The
repeater is at a hospital that has allowed us to put up the repeater
antenna but is very hesitant to permit additional antennas. So, is there a
way that I can use the repeater antenna for
4 matches
Mail list logo