I Saw Glenayre 9000 series exciter, receiver, TX controller, up/down converter,
as well as Decibel cavity, and Wacom preselector on E Bay, anyone have any
experience retuning these to useable frequencies?
I've got an old Glenayre UHF 50 watt PA that I'm hoping to be putting into
service soon, but I need find a copy of the serviced manual to tune it up.
The only part number I can find on it is 12.0361
Any one have a PDF copy out there?
Sean
I have a Glenayre RL453 receiver I want to place on a 440 mHz link frequency,
Can anyone direct me to a manual for this radio or can you provide me with info
on setting the dip switches to reprogram the frequency.
Thanks, Don Kerouac K9NR
www.midstatecomm.com
http://stvfd.homestead.com/ www.repeater.net/n2hlt
--- On Sun, 6/14/09, Chuck Kelsey wb2...@roadrunner.com wrote:
From: Chuck Kelsey wb2...@roadrunner.com
Subject: Re: [Repeater-Builder] Glenayre UHF PA
To: Repeater-Builder@yahoogroups.com
Date: Sunday, June 14, 2009, 7:34 PM
: [Repeater-Builder] Glenayre UHF PA
OK, thanks.
Anyone else out there know if the Glenayre 97-series UHF PA
will work in the
ham portion of the band?
Chuck
WB2EDV
- Original Message -
From: Adam Feuer feu...@optonline.net
mailto:feuera%40optonline.net
To: Repeater
Anyone know if a UHF Glenayre PA will work in the ham portion of the band?
Chuck
WB2EDV
Chuck,
Not being sure which model Glenayre PA you're referring to, I'm running
several QT-7795 and QT-6775's on 442 thru 449 with no degradation. Do
you have a QT series or the 97 series?
Adam N2ACF
Chuck Kelsey wrote:
Anyone know if a UHF Glenayre PA will work in the ham portion of the
It is the 97 series.
Chuck
WB2EDV
- Original Message -
From: Adam Feuer feu...@optonline.net
To: Repeater-Builder@yahoogroups.com
Sent: Sunday, June 14, 2009 7:05 PM
Subject: Re: [Repeater-Builder] Glenayre UHF PA
Chuck,
Not being sure which model Glenayre PA you're referring
: [Repeater-Builder] Glenayre UHF PA
Chuck,
Not being sure which model Glenayre PA you're referring to, I'm running
several QT-7795 and QT-6775's on 442 thru 449 with no degradation. Do
you have a QT series or the 97 series?
Adam N2ACF
Chuck Kelsey wrote:
Anyone know if a UHF
: [Repeater-Builder] Glenayre UHF PA
Chuck,
Not being sure which model Glenayre PA you're referring to, I'm running
several QT-7795 and QT-6775's on 442 thru 449 with no degradation. Do
you have a QT series or the 97 series?
Adam N2ACF
Chuck Kelsey wrote:
Anyone know if a UHF Glenayre
-Builder] Glenayre UHF PA
Ok, I don't use that model myself. I only have QT's in service.
Adam
At 04:34 PM 6/14/2009, Chuck Kelsey wrote:
OK, thanks.
Anyone else out there know if the Glenayre 97-series UHF PA will work in the
ham portion of the band?
---FWIW Chuck, I'm sure it's a stripline type amp so it should by
its very nature be broadbanded. I'd bet it will tune down to at least
I have the above mid split UHF 250W PA, will it go to 444.xxx and does anyone
have the manual I could purchase?
TIA
Ted W3VG
Well, gang, I brought this puppy home today! Even has a receiver in the
cabinet, but I'm not sure just WHAT kind of receiver it is.
There are **two** antenna connections on left side of the cabinet:
One is a 50-ohm N connection which I assume is the transmitter output.
The other appears to
At 06:14 PM 01/31/07, you wrote:
Well, gang, I brought this puppy home today!
Even has a receiver in the cabinet, but Im
not sure just WHAT kind of receiver it is.
There are **two** antenna connections on left side of the cabinet:
One is a 50-ohm N connection which I assume is the
N9WYS wrote:
Well, unless I can get 900 HT from “da boid”, I guess I’ll be adding in
a receiver of my own “design” (AKA: Maxtrac)… I want this to end up on
my 900 repeater pair. Or could the Sat RX be for freq stability? I
think I’d better hold off until I get some manuals – I’m
31, 2007 6:15 PM
To: Repeater-Builder@yahoogroups.com; [EMAIL PROTECTED];
[EMAIL PROTECTED]; [EMAIL PROTECTED]
Subject: [Repeater-Builder] Glenayre 900 MHz T8500
Well, gang, I brought this puppy home today! Even has a receiver in the
cabinet, but I'm not sure just WHAT kind of receiver
Hello, all...
I have posted this to the AR902 group also, but I hope the combined
knowledge of this group - along with AR902 - can assist me.
I have made arangements to purchase the following:
Glenayre BFLGL-T8500 900 Mhz Paging Base complete with the following
components:
GL-2000 TX
I am just wondering if there is any one on this list that might have
parts or know where I can find parts for a Glenayre gl5000 series model
9t97a125 uhf paging transmitter.
Thanks all
Keith va3kmc
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system
19 matches
Mail list logo