My original plan was to let the transmitter PTT control the Micor
encoder board as usual, but supply a valid user signal present
logic input to abruptly stop the tone when there is no user signal
present... thus allowing the controller to keep the transmitter
keyed for IDs without PL tone.
.
--- Jeff WN3A
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of N1BUG
Sent: Monday, May 03, 2010 3:18 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] IDEA? Re: Micor PL encoder
%40yahoogroups.com
Subject: [Repeater-Builder] IDEA? Re: Micor PL encoder
modification (TLN5731A)
My original plan was to let the transmitter PTT control the Micor
encoder board as usual, but supply a valid user signal present
logic input to abruptly stop the tone when there is no user signal
Thanks Jeff!
Having someone to kick this around with is helping.
Very good point about the ratty user signal. I hadn't thought of that.
You are exactly right. I need to make sure the controller is set up
to always keep the transmitter up for a short time after loss of
user signal on the
: Micor PL encoder modification
(TLN5731A)
Thanks Jeff!
Having someone to kick this around with is helping.
Very good point about the ratty user signal. I hadn't thought of that.
You are exactly right. I need to make sure the controller is set up
to always keep the transmitter up
At 01:56 PM 5/3/2010, Don Kupferschmidt wrote:
There was an earlier post concerning grounding a pin on the backplane which
instantly disables the PL tone on the transmitter. I've got a VHF unified
chassis MICOR which is controlled by an SCOM 7K controller. I used one of
the digital outputs of
shameless plug, right Ken?
Don, KD9PT
- Original Message -
From: Ken Arck
To: Repeater-Builder@yahoogroups.com
Sent: Monday, May 03, 2010 4:03 PM
Subject: Re: [Repeater-Builder] IDEA? Re: Micor PL encoder modification
(TLN5731A)
At 01:56 PM 5/3/2010, Don
At 02:16 PM 5/3/2010, Don Kupferschmidt wrote:
shameless plug, right Ken?
---Who, me? g
--
President and CTO - Arcom Communications
Makers of repeater controllers and accessories.
http://www.arcomcontrollers.com/
: Micor PL encoder modification
(TLN5731A)
Thanks Jeff!
Having someone to kick this around with is helping.
Very good point about the ratty user signal. I hadn't thought of that.
You are exactly right. I need to make sure the controller is set up
to always keep the transmitter up
Thanks Don.
Yep, I was over-thinking the problem! Links are new to me. Somehow I
was forgetting I have control over keeping the link transmitter up
after I drop the PL tone, so I can eliminate squelch crashes at the
receive end of the link that way. All I need to do is ground that
trusty pin
Paul,
Here is my two cents worth.
I am not sure what you are using for your other equipment in your system, but
we use Micor repeaters and have a combination of Motorola Maxtrac, GE MVS, and
Johnson Challenger link radios. We always enable PL encode and decode with
reverse burst on the
11 matches
Mail list logo