RE: [Repeater-Builder] Linking a Kenwood TKR-750 to an ICOM IC-F521

At 11:06 AM 4/3/2008, John Melville wrote: >I have determine the following: > >1. Pin 11 is TX Audio OUT of the Kenwood TKR-750 (confirmed) > >2. Pin 10 is RX Audio IN on the Kenwood TKR-750 (to be verified) > >3. Pin 3 is TX Audio OUT of the ICOM F521 (confirmed) > >4. Pi

Re: [Repeater-Builder] Linking a Kenwood TKR-750 to an ICOM IC-F521

At 07:42 AM 4/3/2008, George Henry wrote:

RE: [Repeater-Builder] Linking a Kenwood TKR-750 to an ICOM IC-F521

At 11:06 AM 4/3/2008, John Melville wrote: >I have determine the following: > >1. Pin 11 is TX Audio OUT of the Kenwood TKR-750 (confirmed) > >2. Pin 10 is RX Audio IN on the Kenwood TKR-750 (to be verified) > >3. Pin 3 is TX Audio OUT of the ICOM F521 (confirmed) > >4. Pi

RE: [Repeater-Builder] Linking a Kenwood TKR-750 to an ICOM IC-F521

. John From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of Ken Arck Sent: Thursday, April 03, 2008 8:54 AM To: Repeater-Builder@yahoogroups.com Subject: Re: [Repeater-Builder] Linking a Kenwood TKR-750 to an ICOM IC-F521 At 07:42 AM 4/3/2008, George Henry wrote: The

Re: [Repeater-Builder] Linking a Kenwood TKR-750 to an ICOM IC-F521

At 07:42 AM 4/3/2008, George Henry wrote: The connection information in the following link may prove helpful: <http://www.repeater-builder.com/kenwood/rc210-to-tkr.pdf> Receive audio appears to be pin 10, not 11, and pin 16 is the PTT

Re: [Repeater-Builder] Linking a Kenwood TKR-750 to an ICOM IC-F521

output (pin 25), to an inverter that then pulls the PTT of the Icom low. George, KA3HSW / WQGJ413 -Original Message- >From: askjam <[EMAIL PROTECTED]> >Sent: Apr 2, 2008 11:07 AM >To: Repeater-Builder@yahoogroups.com >Subject: [Repeater-Builder] Linking a Kenwood TK

Re: [Repeater-Builder] Linking a Kenwood TKR-750 to an ICOM IC-F521

Wednesday, April 02, 2008 12:07 PM Subject: [Repeater-Builder] Linking a Kenwood TKR-750 to an ICOM IC-F521 > I'm trying to use an ICOM F521 as a link repeater and interfacing it to > an existing Kenwood TKR-750 site repeater and cannot seem to get the > pinout below work. It would ap

[Repeater-Builder] Linking a Kenwood TKR-750 to an ICOM IC-F521

I'm trying to use an ICOM F521 as a link repeater and interfacing it to an existing Kenwood TKR-750 site repeater and cannot seem to get the pinout below work. It would appear that the EPTT on the ICOM or Kenwood is not triggering. Kenwood TKR-750 Icom F521 Pin 7(DG).Pin 8(Mod