[Repeater-Builder] Motorola Rib

I am in need of the pin out connections for the RJ 45 to DB 25 cable used with a Motorola Rib I have searched the RB site but can't seem to find it. Thanks in advance.. Ralph, W7HSG

RE: [Repeater-Builder] Motorola Rib

Ralph it is Probably on this site somewhere if Not check here http://www.batlabs.com/ Hope that Helps Good Luck Don KA9QJG ___

Re: [Repeater-Builder] MOTOROLA Rib Error

Mine went intermittent as well. Turns out they only soldered two contacts on the DB25 (RIB-to-radio) connector pins 14-25 row, and both of these cracked under the strain of holding the connector to the small circuit board. The pins 1-13 row had almost all of its contacts soldered. They were

RE: [Repeater-Builder] MOTOROLA Rib Error

@yahoogroups.com Subject: [Repeater-Builder] MOTOROLA Rib Error Hi Guys, I am having an intermittent programming problem with my Motorola Rib Box. This is one of the after market rib boxes that works great 95% of the time and the other 5% I get an error message Serial BUS FAILURE POWER FAULT. My radio

RE: [Repeater-Builder] MOTOROLA Rib Error

8:52 PM To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] MOTOROLA Rib Error Hi Guys, I am having an intermittent programming problem with my Motorola Rib Box. This is one of the after market rib boxes that works great 95% of the time and the other 5% I get an error message Serial

[Repeater-Builder] MOTOROLA Rib Error

Hi Guys, I am having an intermittent programming problem with my Motorola Rib Box. This is one of the after market rib boxes that works great 95% of the time and the other 5% I get an error message Serial BUS FAILURE POWER FAULT. My radio is powered up, my battery is good in the rib box and the

RE: [Repeater-Builder] MOTOROLA Rib Error

-Builder] MOTOROLA Rib Error Hi Guys, I am having an intermittent programming problem with my Motorola Rib Box. This is one of the after market rib boxes that works great 95% of the time and the other 5% I get an error message Serial BUS FAILURE POWER FAULT. My radio is powered up, my battery is good

[Repeater-Builder] Motorola RIB

Can anyone Please tell Me What the Rating and the Polarity of the Center pin is on the Motorola RIB RLN4008B , Tired of worrying if the 9 volt batter gets weak while reading the radio . Happy Holidays Don KA9QJG PS I will not tell Big M who gave me the Info Ha Ha

Re: [Repeater-Builder] Motorola RIB

If you look at the RIB schematic (see the RSS page here) you will see that it's tip positive and that all three sources are wired together through diodes - the power jack, the 9v battery and the external power pin (from the radio cable - a lot of mobiles like the Spectra have switched +12 on the