Re: [Repeater-Builder] Ot, Need a Tool Part #

2009-03-31 Thread Brian Raker
Didn't Radio Shack used to carry tools for making the crimp connections? Ah yes, here ya go, should do the trick... 276-1595, available at most stores. http://www.radioshack.com/product/index.jsp?productId=2103683 Or you could go like what others have recommended, and see if you can source

Re: [Repeater-Builder] Ot, Need a Tool Part #

2009-03-31 Thread Chris Carruba
From: Brian Raker brian.ra...@gmail.com To: Repeater-Builder@yahoogroups.com Sent: Monday, March 30, 2009 9:02:10 PM Subject: Re: [Repeater-Builder] Ot, Need a Tool Part # Didn't Radio Shack used to carry tools for making the crimp connections? Ah yes, here ya go, should do

Re: [Repeater-Builder] Ot, Need a Tool Part #

2009-03-31 Thread John Dewitt
...@yahoo.com Subject: Re: [Repeater-Builder] Ot, Need a Tool Part # To: Repeater-Builder@yahoogroups.com Date: Tuesday, March 31, 2009, 5:10 AM That will not crimp a 20 pin connector... He asked for a specific part number for a tool to do a specific job... I assumed he wanted the proper one

[Repeater-Builder] Ot, Need a Tool Part #

2009-03-30 Thread Ryan
Hi Group, I am in need of the crimp tool for the 16 connector for the gm300 series. The tool that allows crimping of the pins to wire. Thanks in advance, Ryan n3ssl

Re: [Repeater-Builder] Ot, Need a Tool Part #

2009-03-30 Thread Mike Pugh
Ryan wrote: Hi Group, I am in need of the crimp tool for the 16 connector for the gm300 series. The tool that allows crimping of the pins to wire. Also, a source for said tool. I want one too!! Mike

Re: [Repeater-Builder] Ot, Need a Tool Part #

2009-03-30 Thread Ken Arck
At 04:29 PM 3/30/2009, Mike Pugh wrote: Ryan wrote: Hi Group, I am in need of the crimp tool for the 16 connector for the gm300 series. The tool that allows crimping of the pins to wire. Also, a source for said tool. I want one too!! Mike Needle nose pliers and a little solder

Re: [Repeater-Builder] Ot, Need a Tool Part #

2009-03-30 Thread Chris Carruba
Carruba (WQIK389) CompuTec Data Systems Custom Written Software, Networking, Forensic Data Recovery From: Mike Pugh mikep...@mikepugh.net To: Repeater-Builder@yahoogroups.com Sent: Monday, March 30, 2009 6:29:57 PM Subject: Re: [Repeater-Builder] Ot, Need a Tool

Re: [Repeater-Builder] Ot, Need a Tool Part #

2009-03-30 Thread Mike Pugh
Ken Arck wrote: At 04:29 PM 3/30/2009, Mike Pugh wrote: Ryan wrote: Hi Group, I am in need of the crimp tool for the 16 connector for the gm300 series. The tool that allows crimping of the pins to wire. Also, a source for said tool. I want one too!! Mike

Re: [Repeater-Builder] Ot, Need a Tool Part #

2009-03-30 Thread Mike Pugh
Chris Carruba wrote: I think you're referring to AMP tool # 91516-1 http://parts.digikey.com/1/parts/391772-tool-crimper-mt-conn-20-24-awg-91516-1.html big $$'s for a 1 time use... No, I am definitely NOT talking about a $570 tool!!! :-) Mike