Travis,
Thank you foer the updated material on the Johnson repeater.
I the photos of the CR1010 it shows the correct controller for this
model. The one I have has a Johnson controller board, but it
appears to of an older series. It does not have the keypad, digital
display, or the power
Danny,
There is some quoted text from ICM in blue, and pictures, showing
which channel elements that ICM will re-crystal here:
http://aa9nv.r2i.net/equipment.htm
Go to the Johnson repeater section.
I sent you my correspondence from ICM direct.
Last quote I had was $115.45 each element or
Danny
ICM rerocked a pair for me last year. Not a problem. They were for
the CR1010 from 450 to 444Mhz.
From the thread Eric suggested you contact ICM and send them the whole
elements. That was exactly what I did and the cost was $168.65 shipped.
Turn around time was less than 10 days.
--
Thanks Tony,
I will do just that. Thats the best news that i have had on the E.F.
Jhohnson machines in a while.
Cheers Mate,
Danny
- In Repeater-Builder@yahoogroups.com, tonyn2mft tonyn2...@...
wrote:
Danny
ICM rerocked a pair for me last year. Not a problem. They were for
the
James I'm not sure when you contacted ICM about re rocking your TCXO
but I had no problem with them in July 2008. I sent them 2 TCXO's.
They were rocked and compensated and returned in less than 2 weeks.
These were for the CR1010.
Catalog # Description
41534
I have a CR 1010 repeater that I have crystaled for the ham band. The
first place I called was ICM and they did not want to work on the
TCXOs at all. I then called Bomar Crystal and they would not work on
the TCXO either however they had the specs for the crystals and would
cut them for my
6 matches
Mail list logo
