N9WYS [EMAIL PROTECTED] wrote:
I have an MSR2000 on 444.550 for the
local ham club / county EMA. The PA (a
110W model) is out again. We just had
this repaired by the local Motorola
shop, with whom we've had very good
results from in the past. We're running
the PA at about 80W,
Not
Good question, but it added an extra .12 desense when we put it in... It's
a TP-3200.
-Original Message-
From: Jim B. [mailto:[EMAIL PROTECTED]
Sent: Tuesday, September 07, 2004 1:48 PM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Re: MSR2000 PA out - again
.
-Original Message-
From: Jim B. [mailto:[EMAIL PROTECTED]
Sent: Tuesday, September 07, 2004 1:48 PM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Re: MSR2000 PA out - again...
N9WYS wrote:
Hi, all...
OK - I was hoping that 80W would be enough of a drop
Jim B. [EMAIL PROTECTED] wrote:
Sounds like some noise is getting in. Are all the leads shielded?
How about the shields on the rx? I've put together a couple of
TP-3200 rptrs, and none had that problem.
--
I have seen the TP3200 pannels generate some noise. Be sure to ask
Communications
4 matches
Mail list logo