Tuesday, February 28, 2006 6:20 PM Subject: Re: [MotorolaR100Repeater] Fw: [Repeater-Builder] motorola r100 rptr
> The hang-time on a R100 is determined by JU12 and resistors R922, R923 and > R924. All these parts are found on the Control Board which is in the lid > of the repeater. > > 2 sec hang-time would mean JU12 is out. R922 and R923 out. R924 (27K)in. > > Hopefully your Control Board is silkscreened so you can find these > locations. > > > Good Luck!! > Randy > > > >> > >> > >> >> hello >> >> i have a uhf25watt r 100 motorola repeater which has been set up >> >> for no repeater tail at end of transmitting. >> >> i want to put it back to the original 2 second default setup >> >> could someone tell me the procedure involved on the controller >> >> board as i see they soudered a few new electronic parts on it >> >> thanks >> >> tom >> > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/