Could be a lot of things.
If you are running a PL tone, the level may be too low and your voice is
causing talk off.
Could be you are falsing the controller's touch tone decoder and it's
programmed to not pass audio when it hears a tone.
Could be deviation is too high somewhere and you are
Not enough information given to draw any conclusion!
Fred W5VAY
_
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of mimomeg
Sent: Sunday, June 06, 2010 9:56 AM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] transmission
Chuck is right...
So we need to ask: Does this phenomenon happen to just YOUR transmissions,
or with everyone's transmissions??
You need to determine WHERE the problem is occurring before you can
troubleshoot further.
Mark - N9WYS
-Original Message-
From:
Check the deviation levels of your voice and the PL tone (if used), and
verify that they are compatible with the repeater's receive bandpass. In
some radios- Alinco and Icom are typical- the PL tone is way too high in
deviation, and gets distorted when voice peaks push the total deviation into
Falsing of the DTMF decoder in the controller? Disable DTMF muting
temporarily and see if the problem stops.
On Sun, Jun 6, 2010 at 7:55 AM, mimomeg mimo...@yahoo.fr wrote:
Seem to have period where my transmission (voice) cuts out for a few seconds
every so often, and the person at the other
If the system that you are using has CTCSS then it sounds like your voice at
times is causing the tone to not be decoded causing your voice to cut out.
This happens if your deviation is too wide and/or your mic volume is too
high.
David
From: Repeater-Builder@yahoogroups.com
6 matches
Mail list logo
