Thanks Mike, I already grabbed it. ;) According to the info
in the article it does look like you need to set it up as a "remoted" base to
get the TX and RX audio, etc. to the back panel connector, so it looks like the
internal controller cant be used and needs to be replaced. At least thats my
take on it. ;) I emailed Bob on it anyway just to see what he
says.
Kevin
K2KMB
From: Mike Morris WA6ILQ [mailto:[EMAIL PROTECTED]
Sent: Wednesday, February 02, 2005 1:31 PM
To: Repeater-Builder@yahoogroups.com
Subject: [SPAM] - Re: [Repeater-Builder] MTR-2000 - Email found in subject
I'm looking to set up a Doug Hall voter system on a Motorola MTR-2000 repeater. I called DHE but they dont have any interface information for that repeater available. Wondering if anyone else has done this and might have the connection and config information to connect these 2 together. The system is currently in repeater mode. The only thing Duane was aware of was that the unit might need to be configured in base station mode as opposed to repeater mode to gain access to the TX and RX audio, COR, etc, but wasnt 100% sure what needed to be done. TIA to all.
Kevin
K2KMB
Go to www.repeater-builder.com, and then select the motorola page.
There is an article on interfacing the MTR to an external controller
there, and that article probably has the info you need. If not, the
author's email address is at the end of the file.
Mike WA6ILQ
Yahoo! Groups Links
- To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
- To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
- Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
