the expense, grief and time.
Maybe Kevin needs to put this message on every email that appears on
Repeater-Builder ;-)
Chuck
WB2EDV
- Original Message -
From:
To:
Sent: Thursday, October 18, 2007 6:10 PM
Subject: Re: [Repeater-Builder] Repeater on Portable Radios
I thought LMR400
chris Inos wrote:
For our American Red Cross use...local chapter
We are in a project to make a simple repeater from two IC H-16 VHF
UHF would be a LOT easier, and thus cheaper...
--
Jim Barbour
WD8CHL
Chris,
One note...never, never, never use 9913 for a repeater, even if no duplexer and
using separate antennas which sounds as if you are going to do.
9913 and any coax that had different metals for the outer shield (9913 has foil
and braid). It can generate noise from the transmitter that
Ron:
thanks for the heads-up...I am just listing what we have in the form of
donationwe can deviate from using what we now have and recourse to whatever
is recommended and within my personal funds (shallow pocket).
I have surfed the net on repeater maker but haven't identified a unit
I thought LMR400 was supposed to be good on 2m. That is
what I am using. Maybe that is part of the problem I am
having. Is LMR600 the same way? I am running that from
the antenna to the duplexer only. Everything else is
double shielded.
Vern
On Thu, 18 Oct 2007 15:33:57 -0500 (CDT)
buy yourself a real repeater, look at ebay they are there.
the H-16 are not made for repeater service.
- Original Message -
From: chris Inos
To: Repeater-Builder@yahoogroups.com
Sent: Thursday, October 18, 2007 3:03 PM
Subject: [Repeater-Builder] Repeater on Portable
--- [EMAIL PROTECTED] wrote:
I thought LMR400 was supposed to be good on 2m.
That is
what I am using. Maybe that is part of the problem
I am
having. Is LMR600 the same way? I am running that
from
the antenna to the duplexer only. Everything else
is
double shielded.
Vern
There are several simple devices that you can use. It
depends on how much you want the controller to do. Of
course, the more it does, the more it costs.
Cross-connect the COR output of one radio to the PTT
input of the other radio. Then connect the audio
output of one radio to the audio input of
Subject: Re: [Repeater-Builder] Repeater on Portable Radios
I thought LMR400 was supposed to be good on 2m. That is
what I am using. Maybe that is part of the problem I am
having. Is LMR600 the same way? I am running that from
the antenna to the duplexer only. Everything else is
double
-Builder] Repeater on Portable Radios
I thought LMR400 was supposed to be good on 2m. That is
what I am using. Maybe that is part of the problem I am
having. Is LMR600 the same way? I am running that from
the antenna to the duplexer only. Everything else is
double
10 matches
Mail list logo
