[Repeater-Builder] 2x Zetron 36B phone link base

2008-12-14 Thread gervais
hi too all i have 2 Zetron here 36B phone Link Base with OEM manual anyone interested send me an email direct before i go on Ebay i prefer to let it go in the communauty of hamradio 73/s gervais ve2ckn ve2...@hotmail.com mailto:ve2...@hotmail.com

[Repeater-Builder] E.F. Johnson Repeaters

2008-12-14 Thread D.
Hello to the group. i am in need of some information on E.F. Johnson Repeaters. I am looking for any data about retuning them back into the UHF ham band. I have two different machines with different product numbers on the exciter / receiver / PA Both machines have a controller, Channel Guard

[Repeater-Builder] Mitrek

2008-12-14 Thread Randy
Can any one tell me where I can find a cable for a TS64 to a Motorola Mitrek Randy

Re: [Repeater-Builder] E.F. Johnson Repeaters

2008-12-14 Thread Captainlance
Hello, I serviced many of these back in the day... the 1010 is a slightly later version of the 1000, both are good units, and will retune into the ham band with little or no modification needed. The crystals are very 'finicky', do not try to replace them yourself, only International Crystal can

Re: [Repeater-Builder] Mitrek

2008-12-14 Thread Chuck Kelsey
Contact Communications Specialists. I believe that they make one. Chuck WB2EDV - Original Message - From: Randy k8kh...@earthlink.net To: Repeater-Builder@yahoogroups.com Sent: Sunday, December 14, 2008 8:58 PM Subject: [Repeater-Builder] Mitrek Can any one tell me where I can find

Re: [Repeater-Builder] Mitrek

2008-12-14 Thread Mike Morris WA6ILQ
At 05:58 PM 12/14/08, you wrote: Can any one tell me where I can find a cable for a TS64 to a Motorola Mitrek Randy Build it yourself. The full TS64 data package is on the Com-Spec page at www.repeater-builder.com and the Mitrek info is there as well (I

[Repeater-Builder] Mitrek

2008-12-14 Thread Randy
At 05:58 PM 12/14/08, you wrote: Can any one tell me where I can find a cable for a TS64 to a Motorola Mitrek Randy Build it yourself. The full TS64 data package is on the Com-Spec page at www.repeater-builder.com and the Mitrek info is there as well (I put it there after a bunch of folks

Re: [Repeater-Builder] Mitrek

2008-12-14 Thread Milt
Comm Spec has a prewired cable available. See http://www.com-spec.com/insheet/mitrek2.pdf Milt N3LTQ - Original Message - From: Randy k8kh...@earthlink.net To: Repeater-Builder@yahoogroups.com Sent: Sunday, December 14, 2008 10:27 PM Subject: [Repeater-Builder] Mitrek At 05:58

[Repeater-Builder] Mitrek

2008-12-14 Thread Randy
Thanks Milt, Mike and others for the help we will give Comm Spec a call in the morning. Randy K8KHW Comm Spec has a prewired cable available. See http://www.com-spec.com/insheet/mitrek2.pdf Milt N3LTQ - Original Message - From: Randy k8kh...@earthlink.net To:

[Repeater-Builder] Re: E.F. Johnson Repeaters

2008-12-14 Thread n0qzv_jhorn
I have a CR 1010 repeater that I have crystaled for the ham band. The first place I called was ICM and they did not want to work on the TCXOs at all. I then called Bomar Crystal and they would not work on the TCXO either however they had the specs for the crystals and would cut them for my