Re: [Repeater-Builder] Stainless hardware

Another good one, Kevin. Chuck WB2EDV - Original Message - From: Kevin OConnell [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Saturday, September 25, 2004 4:21 PM Subject: Re: [Repeater-Builder] Stainless hardware Another outfit for just about anything stainless is

Re: [Repeater-Builder] Stainless hardware

- Original Message - From: n1iic Jason Greene [EMAIL PROTECTED] Greetings, everyone. I am looking for a source for stainless hardware including up to 2 1/2 u-bolts, nylock nuts, washers, etc. I have searched and can't find the right vendor. In a word...

[Repeater-Builder] 929 MHZ CAN / notch filter

HI gang, Does anyone have one or two 929 Mhz cans that could be converted to notch filter use? Please contact me off board. 73 Coy Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an

[Repeater-Builder] roger beep for a master 2 repeater???

hi ,thanks for reading , i am operating a Vhf Base repeater here,an Ge MAster 2. is there a controle card that enable a Roger Beep ?or an special sound at the end of the tx tail. i would like to add a rober beep locally to identify it for a blind person that is workig with sound to recognise his

Re: Grounding of towers and antennas ... Re: [Repeater-Builder] Towers?

Just finished reading your info on my ? for my 100 ft tower project. Thanks everybody! - Original Message - From: Mike WA6ILQ [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Saturday, September 25, 2004 10:01 AM Subject: RE: Grounding of towers and antennas ... Re:

[Repeater-Builder] MSF-5000 programming

I have the opprutunity to help a group with a UHF MSF-5000 project. I have not yet seen the station, but if it turns out to be a digital capable station that can be programmed via RSS, is there any slight of hand necessary to get down into the 440 ham band? I have the necessary cables and RSS to

[Repeater-Builder] uhf multicoupler??$$$$

hi i have a pair of Sinclair C3024 Multicoupler here i wonder what is there value on the market and i dont want to go on ebay with them , anyone have an idea? they were working on 414 and 419 MHZ Thanks for the informations, Gervais,ve2ckn Yahoo! Groups Links * To visit your group on

Re: Grounding of towers and antennas ... Re: [Repeater-Builder] Towers?

Oh by the way does anybody out there have use for a 19 inch rack mount power supply kepco ate25-40m fully programmable and remote.I am looking to sell it to buy a repeater .It is brand new in the original box unopened. - Original Message - From: sheryl titus [EMAIL PROTECTED] To:

[Repeater-Builder] Re: MSF-5000 programming

Hi Kevin, Noting that you have the software and cables, you must have some experience with the MSF. Providing that it is a range #2 UHF (435mhz to 475mhz), they tune down to the ham band quite nicely. A service manual is a must, especially if it is internally duplexed. Those models are very

[Repeater-Builder] RLC-4

I am in need of several RLC-4 controllers. Does anybody have some that they want to sell. Oregon Repeater Linking Group Mike Mullarkey [EMAIL PROTECTED] www.orlg.org Yahoo! Groups Links To visit your group on the web, go