HELLO EVERYONE. I HAVE THE RC-1000 CONTROLER OF MCC
COMPANY AND I NEED TO FIND OUT A COR SIGNAL INSIDE THE GM350 MOTOROLA (2CHANNEL)
MOBILE AFTER THE SUBTONE (88.5)
DECODER. I WISH SOMEONE HELPS ON IT.
Best regards
SV1EDZ
Dimitris Velissaris
Technical Support
RadioCommunications
Looking for a used Decibel Products DB408-B 450-470mhz Antenna in good
condition. Within driving distance of NJ preferred. Email
[EMAIL PROTECTED]
Thanks,
DougD
KC2KGY
WPSI726
Yahoo! Groups Links
* To visit your group on the web, go to:
A way of crimping solderless lugs, pins on connectors, etc. when your out
in the field and don't have the correct crimpers. Instead of using the
needlenose pliers above the fulcrum point, use the areajust below the
fulcrum point. A tremendous amount of pressure can be achieved when using
Richard wrote:
Some additional thoughts...
On second thought, I don't think it would be a good idea to disable the
timer, rather set it for 6 or 7 minutes to protect the radio. I don't know
of a hardware timer, but there may well be one; I didn't see it mentioned in
the service manual, but
Thanks for all of the replys. I currently use the pins on the back of the phoenix to get the PTT,TX and RX Audio, and the COS.I was just wondering if anybody was doing it differently.
Doug
---Original Message---
From: Jim B.
Date: 07/27/05 09:26:48
To:
hi does anybody have a manual for the zetron 37 thanks michael.
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
* Your use of Yahoo! Groups is
Rich Garcia wrote:
Jan has been very troublesome in the 25+ years I have been a ham, you hear
of a lot of complaints.
Yup. They indicated my crystal was shipped, however I never received.
Next time I'm not using USPS Parcel!
Yahoo! Groups Links
* To visit your group on the web, go to:
Hi Guys,
If you ever want crystals again, think about going off-shore, our crystal
company, Rakon, located in Auckland, New Zealand produces some of the best
crystals around. And they are not that expensive at all. Got a pair a couple
of months ago, and cost $29 each (about US$18). They do
HI Nick,
I'm going to say this as nicely as I can.
Mobile repeaters are for the most part, completely useless. Most
coordinators want to know exactly where you are going to put your
repeater before they will Coordinate a Freequency pair. Mobile
repeters are at their best as emergency repeaters
Ditto: There are lots of dual band mobiles and at least one dualband
HT that have repeater capability. These are not true Mobile
Repeaters. A Mobile Repeater is a device (usually custom built)
that has 1-2 input frequencies plus tone that repeat out to several
selected repeater input
I tried http://www.rakon.co.nz but it times out. Am I using the correct
URL?
- Original Message -
From: Kevin Natalia [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Wednesday, July 27, 2005 7:02 PM
Subject: Re: [Repeater-Builder] crystals
Hi Guys,
If you ever want
Rakon has offices and plants in several countries besides New Zealand. The
North American sales office can be reached at [EMAIL PROTECTED] The Rakon
home
page is at www.rakon.com
73, Eric Lemmon WB6FLY
Ronny Julian wrote:
I tried http://www.rakon.co.nz but it times out. Am I using the
Link worked for me, so is a valid link.
Kevin.
- Original Message -
From: Eric Lemmon [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Thursday, July 28, 2005 3:25 PM
Subject: Re: [Repeater-Builder] Crystals
Rakon has offices and plants in several countries besides New
Hello All,
The local department of Forestry has an observation tower that is
over 200' off the ground. I would like to put my UHF Amateur repeater
on that tower. I stopped by yesterday and talked to the Fire Fighter
that was stationed there. He had told me that cellphone companies had
asked if
14 matches
Mail list logo