>
If you can procure two more GE's there is a mod out there to take a UHF and a Low-Band and set them up in crossband as just one unit. Use UHF as the link frequency between RX/TX. I believ
Is there a such thing as a duplexer for 10 meters??
Ever seen a Quonset hut? :)
6M duplexers are huge..
You might be as well off using coax stub duplexers. Someone was just talking
about those in the last week or two.
OTOH, if you can put your receiver and transmitter any appreciable distance
Does anyone has a (repeater duty) UHF amp that puts out about 50-
75watts continuous duty with around 3-15watts in? In decent condition
that will work in the 445-450 range. If anyone would be able to donate
one it would be very much appreciated. The reason for post is that I
am 14yrs old and the
check this out.
http://users.erols.com/rfc/coax.htm
73
K6PNG
- Original Message -
From:
Mathew Quaife
To: Repeater-Builder@yahoogroups.com
Sent: Sunday, July 31, 2005 3:37 PM
Subject: Re: [Repeater-Builder] coax
question
What is needed is a source for go
look here.
http://users.erols.com/rfc/n.htm
73
K6PNG
- Original Message -
From: "Mathew Quaife" <[EMAIL PROTECTED]>
To:
Sent: Sunday, July 31, 2005 7:19 PM
Subject: [Repeater-Builder] Need: Type N Female Chassis mounts
>I am looking for 4 type N chassis mount connectors to replace th
Hello All,
Well I just recently got my 10 meter repeater going, and have discover that I need to separate the transmit and receive antennas. The specs on my equipment is a GE MastrII, with the NHRC-3/M2 Controller both transmit and receive is in this unit. Sorry if I sound a little dumb
Hey Mathew,
I got all mine last year when we
replaced
all of the jumpers on all of our
Metro-Comm Ham and GMRS
repeaters from Cook. I bought a 500'
reel.
It was mil spec RG-214/u
Beldon.
It seems to work ok.
Good luck on your hunt!
Very best of 73,
Russ, W3CH
- Original Message --
Hello All,
Well I just recently got my 10 meter repeater going, and have discover
that I need to separate the transmit and receive antennas. The specs
on my equipment is a GE MastrII, with the NHRC-3/M2 Controller both
transmit and receive is in this unit. Sorry if I sound a little dumb
on the r
For Motorola I trust ...
Is the need for Motrac, Micor or MSR2000?
Neil - WA6KLA
radio_doc97 wrote:
>
> HI, again does anyone have a diagram of a station control card
> or have one for sale or trade? Thanks keith
>
>
> Yahoo! Groups Links
>
>
>
>
Yahoo! Groups L
I am looking for 4 type N chassis mount connectors to replace the
PL259's in my amplifier and another receiver. The type that I am
looking for has the big nut on the shaft. I cannot use the type that
has the 4 hole flange. Let me know if you have some and how much to
get them shipped to 4636
Well, I'll toss FSJ1-50 into the mix. No worries about percentage of shield,
or bimetallic problems. It's 1/4" miniature hardline.
It connects nicely into PL-259 connectors with the larger adaptor, and into
N and BNC connectors. 100% shielding.
Yahoo! Groups Links
<*> To visit your gr
I've heard TheWireMan.com mentioned several times
on this list if you're looking for it by the foot.http://thewireman.com/coaxp.htmlSteve
P.
- Original Message -
From:
Mathew Quaife
To: Repeater-Builder@yahoogroups.com
Sent: Sunday, July 31, 2005 3:37 PM
Subject:
HI, again does anyone have a diagram of a station control card
or have one for sale or trade? Thanks keith
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
Thanks guys,
Looks like the RG-214.
--- In Repeater-Builder@yahoogroups.com, Mathew Quaife <[EMAIL PROTECTED]>
wrote:
> What is needed is a source for good Mil Spec RG-214 DS Cable. How
about some leads.
>
> Mathew
>
>
> Ken Arck <[EMAIL PROTECTED]> wrote:
> At 10:50 AM 7/31/2005 -0700,
What is needed is a source for good Mil Spec RG-214 DS Cable. How about some leads.
Mathew
Ken Arck <[EMAIL PROTECTED]> wrote:
At 10:50 AM 7/31/2005 -0700, you wrote: LMR400 (not flex!) by times microwave if on a budget.
Recommend for what use?
What band or frequency?
- Original Message -
From: "feederclamp" <[EMAIL PROTECTED]>
To:
Sent: Sunday, July 31, 2005 10:13 AM
Subject: [Repeater-Builder] coax question
> Hi,
> Just a question to ask what type of coax which you would recommend?
> Thanks
I built one up and while it worked OK with an external preamp, the crystal drift over temp was always a problem even with a wide temp range crystal and to keep the heat in check, I reduced the power to 10 watts. It worked about 95% with the problem above on dead cold and over 105 temp days.
Me
Hi Jerry,
I believe it is a CWID-51B. We have the ID chip programmed,
but are having a problem figuring out the terminal strip
assignments on the back. If we can get that information, it
will help out greatly, but if we need to repair the unit later,
the service manual will be of great importance.
At 10:50 AM 7/31/2005 -0700, you wrote:
LMR400 (not flex!) by times microwave if on a budget.
LMR400 (not flex!) by times microwave if on a budget. Otherwise 7/8" heliax or even 1 7/8" heliax is better if money is no object.
Andy KC2GOW__Do You Yahoo!?Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com
In a duplex situation, you need as a minimum RG-214/U (must be the real
stuff with silver plating). This would be used from transmitter and
receiver to duplexer. From the duplexer to the antenna would depend on
distance. 7/8" hardline preferred, 1/2" hardline acceptable.
73
Glenn
WB4UIV
At 11:
Hi Glenn,
VHF highband and 25 watts
--- In Repeater-Builder@yahoogroups.com, Glenn Little WB4UIV
<[EMAIL PROTECTED]> wrote:
> For what frequency, power, intended use?
>
> 73
> Glenn
> WB4UIV
>
>
> At 10:13 AM 07/31/05, you wrote:
> >Hi,
> >Just a question to ask what type of coax which you wo
Frank Please give me the exact model #., I think I have the manual.
Do you have a source to program the ID chip??
Jerry VE3 EXT
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, se
For what frequency, power, intended use?
73
Glenn
WB4UIV
At 10:13 AM 07/31/05, you wrote:
>Hi,
>Just a question to ask what type of coax which you would recommend?
>Thanks
>
>
>
>
>
>
>
>Yahoo! Groups Links
>
>
>
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http:
Hi,
Just a question to ask what type of coax which you would recommend?
Thanks
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Y
25 matches
Mail list logo