[Repeater-Builder] Install a Cat WX-200 to a Cat 400

Hello, I am tring to hook up a Cat wx-200 to a Cat 400 and after reading the manuals on the both of them, I am realy lost. I have worked with the 300DXL and the 250 and it was a simple job. I hope to put this in a system that has the repeater, 2 link radios and the wx-200 but the wx- 200

[Repeater-Builder] Midland WR-100 S.A.M.E. radio

To add to my post of yesterday regarding this weather radio, per my personal observation of the unit sitting on my desk. Yesterday some heavy weather passed through our area, prompting several warnings. The warning LED comes on and stays on for the duration of the actual warning. The audio

[Repeater-Builder] Tait T800 Series - Programming?

I noted a few messages regarding programming of the T800 series repeaters (Type I) and was curious to know what programmer people are using for the purpose... I'm getting ready to order a service manual or two, and bring a couple of T800's on-line, so your guidance would be helpful.

[Repeater-Builder] Flexar Repeater

I just picked up a complete Flexar Repeater. It is set up fo DC remote, but would like to add a speaker only.There are several screw connections on the bottom of TX unit or is there a inside connection. If anybody has any information I would appreciate it. Sam KE5MID WQGI744

[Repeater-Builder] Re: MTR2000 VHF Motorola Repeater

Eric, Argus would NOT help us with their battery revert/charger device. Forget ANY support. I went with much the same setup that you did in the past. That was 2002, and no problems since. Eric Lemmon [EMAIL PROTECTED] wrote: I suppose it would be a good idea to use the recommended Argus

Re: [Repeater-Builder] Tait T800 Series - Programming?

drbob001 wrote: I noted a few messages regarding programming of the T800 series repeaters (Type I) and was curious to know what programmer people are using for the purpose... I'm getting ready to order a service manual or two, and bring a couple of T800's on-line, so your guidance would be

[Repeater-Builder] 5 minute timers on SAME WX Alert Radios----

In a message dated 6/9/2007 10:56:15 A.M. Central Daylight Time, [EMAIL PROTECTED] writes: The warning LED comes on and stays on for the duration of the actual warning. The audio from the speaker stays on for about 5 minutes, assuming that you have it set up for the voice message

Re: [Repeater-Builder] 5 minute timers on SAME WX Alert Radios----

At 05:17 PM 06/09/07, you wrote: In a message dated 6/9/2007 10:56:15 A.M. Central Daylight Time, [EMAIL PROTECTED] writes: The warning LED comes on and stays on for the duration of the actual warning. The audio from the speaker stays on for about 5 minutes, assuming that you have it set up