[Repeater-Builder] Teletec Omni IQ-2000 repeater--- info needed

I have a Teletec Omni IQ-2000 repeater. Includes two Omni transceivers, one VHF and one UHF intended for mobile repeater or crossband repeater. I need info for the transceivers. Also, any info if this system can be operated with the control head, only one frequency needed.

Re: [Repeater-Builder] ROSIN banded in Canada custom?

Thanks for the reply, in the olden day we use Paraffin wax, Beeswax and Rosin meld it down on a Hot pot then dip the transformer for 5 min, The purpose of the rosin is to weather proof and also to increase the melting temp of the transformer, I did a google search and it all point to Asia countr

RE: [Repeater-Builder] Need tuning info & schematic for MICOR TTD1693BA 110W station transmitter

Oops! The last sentence of my response should read, "TTD1693BA." 73, Eric Lemmon WB6FLY -Original Message- From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of Eric Lemmon Sent: Sunday, March 30, 2008 5:42 PM To: Repeater-Builder@yahoogroups.com Subject: RE: [R

Re: [Repeater-Builder] ROSIN banded in Canada custom?

Rosin is made from pine tar. It is organic, not man made. I do not know why you would want to impregnate a transformer with this. Do you possibly mean that you want to impregnate it with tar?? Your friend google will lead you to a source for your rosin. 73 Glenn WB4UIV At 08:54 PM 3/30/2008

[Repeater-Builder] ROSIN banded in Canada custom?

I know its OT but it have something to do with repeater, I use to rewind my own Transformer 40 years ago, now I have to rewind an old Standard RPT power transformer, But I need to impregnate the transformer in wax that need ROSIN, and have a friend going to Canada Toronto, they said that Canada

RE: [Repeater-Builder] Need tuning info & schmetic for MICOR TTD1693BA 110w station transmitter

Dennis, My reference manual shows that a TTD1693BA transmitter is found in a Micor Compa-Station Base Radio of the "RTB" model series, and is a 90/110 watt intermittent-duty unit for the 150.8-162 MHz split. There are at least two Micor VHF Base Station manuals still available from Motorola Parts

[Repeater-Builder] Need tuning info & schmetic for MICOR TTD1693BA 110w station transmitter

I need the tuning info & schmetic for MICOR TTD1693BA 110w station transmitter. I have tried to Google to locate it as well as looked at Scott Zimmerman's Repeater-Builders site but cannot locate. TNX in advance for any input! 73 Dennis - [EMAIL PROTECTED]

Re: [Repeater-Builder] Mastr II station 2 repeater conversion.... HELP no PL(CG) decode.

68-69 are cut. I guess the card is good. It is a GE card wit dip switches on it. I just noticed a cut trace on the system bord. It looks like it connects to pi 8 labled RUS. Might that be the problem. 73 de N5NPO Norm - Original Message - From: Repeater-Builder@yahoogroups.com To: Repea

Re: [Repeater-Builder] For sale: Icom IC-900AE Service manual

Is this the same manual ? 73 Glenn WB4UIV At 10:00 AM 3/30/2008, n4irs wrote: >I have a VERY good condition Icom 900 service manual. >The manual covers all the RF modules: >UX-19

RE: Re: [Repeater-Builder] False DTMF Muting On CAT-1000 Controller

Tom, That solution is great when the user's DTMF pad holds the tone as long as the button is pressed. But, some radios and mobile mikes have DTMF pads that emit a very short tone burst regardless of how long the digit button is held. Lengthening the tone recognition time may prevent some users f

Re: Re: [Repeater-Builder] False DTMF Muting On CAT-1000 Controller

I once had the same problem with users voices falsing the DTMF decoder and causing the cover tone to be activated during voice conversations just like the original posters problem. I contacted the controller manufacturer, Peter at NHRC I think. He told me it is a comon problem with that decoder chi

RE: [Repeater-Builder] Mastr II station 2 repeater conversion.... HELP no PL(CG) decode.

47/48 is for single freq stations, do you have 68/69 cut? Are you sure the decoder is good? Pin 3 enable/disables the decoder, pin 5 activates rx mute to squelch the rec and RUS when no sub tone is detected. Pin 4 is 10v for reference. 73 Don W5DK From: Repeater-Builder@yahoogroups.com

Re: [Repeater-Builder] Manuals on HENRY power amps

Gary, Might try e-bay search of Henry. I did, but most was not about Ham or comm items, but there were some. If found at least might get model number. One would need to see amp to know where to start a search. Henry makes lots of RF gear including Ham, commercial, HDTV, etc. 73, ron, n9ee/r

[Repeater-Builder] Nextel BDA Off Topic

I know this is a bit off topic but I have a new Nextel BDA and was wondering if anybody on the list would be of interest in this unit before I place it on EBay. IT is a CSC Coverage Solutions; Corp the model is a BDA-CELLAB-0.5/2W-60-A When this was purchased several months back, it cost $3200 de

[Repeater-Builder] Manuals on HENRY power amps

Hello, I have a UHF power amp that looks close to a HENRY design, but it has no model info at all. Does anyone know of a place one can search for manuals and or pictures of HENRY amps. If need be, I can supply pics if someone thinks they can help me ID the unit. Thanks Gary KI4VDP

[Repeater-Builder] Mastr II station 2 repeater conversion.... HELP no PL(CG) decode.

HELP!!! I have converted a Mastr II station to a repeater, but no PL decode. I cut 2 jumpers on the system board and still no decode. It works carrier sql. I have the factory GE decode board installed on the system board and on the 10v reg. Juimpers 1-2 and 1-3 are installed. What gives? I have

[Repeater-Builder] For sale: Icom IC-900AE Service manual

I have a VERY good condition Icom 900 service manual. The manual covers all the RF modules: UX-19A/E, UX-29A/E, UX-39A/E, UX-49A/E UX-129A/E Plus interface A and interface B. Includes schematics, logic diagrams and complete data format information. If you have a IC-900 remote base this is the man

Re: [Repeater-Builder] motorola msf5000/ repeater.

If you go to the web site associated with this group, there's a section that deals with the MSF and PURC stations, and an article that describes the various interface signals, including the pinouts of the front panel MIC jack. There's no real speaker output. The metering panels made for the MSF st

Re: Re: [Repeater-Builder] False DTMF Muting On CAT-1000 Controller

Nate, Chill out...take a pill, hi. The 3 V p-p is for the 8870/8880 internal op-amp level. Is it in stone? No, but found to be good level. This is not an input level to the circuit or IC, but is the internal op-amp output at pin 3 and what the internal parts of the IC is going to be decodin

[Repeater-Builder] motorola msf5000/ repeater.

hi any one got the mic pinouts and i like to use a speaker with this.allso any manuals if any ones got any info for this ? ive uploaded some other manuals to the group so if u got any thing let me know ,software ect? i have version 05.2100 .any up dated or other soft ware ?? email me cheers,vin