Verision, in the Dallas, Texas area, recently sold their interest in BPL to
Oncor, Which was part of TXU before it was split apart, who is the local
power Billng and Powerline company for several million/billion, I don't
remember the exact mononatary number, like it really matters anyway!.
It
That antenna was probably made by Phelps Dodge (before Cellwave). They
are fairly broadbanded as the system transmitted at 152-153.
Someone said the individual elements are 100 ohms.
--- In Repeater-Builder@yahoogroups.com, ve3iqzz [EMAIL PROTECTED] wrote:
This antenna was used for the old Bell
I was given several of those about 20 years ago. At that time they
appeared to have been in use for at least 20 years so I suspect the
design goes back at least into the 60's. My guess is they were made by
Phelps Dodge which was a popular commercial antenna manufacture during
that time.
I am having trouble veiwing this antenna. Could someon e-mail a pic to [EMAIL
PROTECTED] .
Thanks!
- Original Message -
From: Repeater-Builder@yahoogroups.com Repeater-Builder@yahoogroups.com
To: Repeater-Builder@yahoogroups.com Repeater-Builder@yahoogroups.com
Sent: Sat Jun 14 06:18:33
GC is www.gcelectronics.com
Action Electronics is www.action-electronics.com
--- Jeff
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of n9wys
Sent: Friday, June 13, 2008 11:39 AM
To:
Just do a search for 9440 at the top of the web page on the right
side.
When I was a kid, GC stood for General Cement they made things
like Gliptol which was like clear nail polish that was used in
electronics to seal pots and coils to keep them from moving
Boy, now I have really given
don't forget 'Corona Dope'
VBG
G
- Original Message -
From: Coy Hilton
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, June 14, 2008 11:33 AM
Subject: [Repeater-Builder] Re: need slug for GE Delta
Just do a search for 9440 at the top of the web page on the right
--- In Repeater-Builder@yahoogroups.com, Dennis Wade
[EMAIL PROTECTED] wrote:
Good evening everyone,
Subject says it all. Thought I had one lined up but the
seller flaked. Need a CF-25 Toughbook or equivalent to program my
MT-1000 and Spectras.
Let me know what
I also had one on 152 mhz and it was a Celwave -
We stretched it a bit and it is still being used at
a friends house in Windsor MO. on a 2 meter
repeater 15 years later - Dave / NĂ˜ATH
- Original Message -
From: Thomas Oliver
To: Repeater-Builder@yahoogroups.com
Sent: Friday, June 13,
Re: Who's fixing Service Monitors these days?
A fried just asked me if I know any business (or person) fixing
service monitors? He's got a Marconi 2955b he's like to try and
have serviced by ___?
Any help from the group...?thanks in advance for your replies.
cheers,
I really had Great Service from Bob at http://www.cardinalelec.com/
Fortunately it was only a Couple hour drive to drop it off and pick it
up , This is where the Pros go for the FCC And Military Certification .
Good Luck
Don KA9QJG
Re: Sleeper Duplexer Deal on Ebay 72 and 220 MHz bottles
There's a 72MHz four bottle duplexer at auction on Ebay:
Decibel DB-4038 Low Band 6 Meter Duplexer Set
Ebay Item number: 300232286606
There are number of things you could do with these bottles,
which include using them at 72MHz,
Ken did a nice rehab on my IFR500.
http://www.kgelectronics.com/about.html
Steve NU5D
ka9qjg wrote:
I really had Great Service from Bob at http://www.cardinalelec.com/
Fortunately it was only a Couple hour drive to drop it off and pick
it up , This is where the Pros go for the
and where can I find a manual for my Motorola S-1327B ?
Gary
- Original Message -
From: skipp025
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, June 14, 2008 1:46 PM
Subject: [Repeater-Builder] Who's fixing Service Monitors these days?
Re: Who's fixing Service
I have a sick VHF MSF5000 digital repeater. It will not operate and the
display cycles through the segment test (all segments test OK).
Then shows 5.32 which I believe should be the firmware version.
Then L06, L07 and the D07. None of these error codes are listed in the
service manual (just
Kurt did a great job on my IFR 1200. I am totally satisfied with his
abilities and willingness to help.
Gary K2UQ
In a message dated 6/14/2008 3:03:05 P.M. Eastern Daylight Time,
[EMAIL PROTECTED] writes:
Ken did a nice rehab on my IFR500.
Hi
Sounds like garbage on the 5volt bus. Change the electrolytic caps associated
with the 5 volt dc converter. Just use good quality caps and it should solve
the problem. You do NOT need the special 3 lead cap that M uses, just a good
quality cap (low ESR)
Ralph
-- Original
I've got two 900mhz MSF5000 CLB-based paging transmitters
for sale or trade. $250 each if you pick up, or $250 each plus
the actual cost of shipping if you need them shipped.
They are in the Glendale California area (northeast of Los Angeles).
I have someone that can burn the PROMS for them to
Thanks Jeff!
-Original Message-
From: Repeater-Builder@yahoogroups.com On Behalf Of Jeff DePolo
GC is www.gcelectronics.com
Action Electronics is www.action-electronics.com
--- Jeff
-Original Message-
From: Repeater-Builder@yahoogroups.com
Anybody have any old Automute boards in their junkbox? Prefer the red
inductor ones, but not too picky.
Thanks
Will
**Vote for your city's best dining and nightlife. City's Best
2008. (http://citysbest.aol.com?ncid=aolacg0005000102)
Was that used in the low-band Mocom-10?
-- Original Message --
Received: Sat, 14 Jun 2008 08:12:26 PM PDT
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder]Motorola Automute boards
Anybody have any old Automute boards in their junkbox? Prefer the
Yes, and I have seen a Motrac desktop consolette so equipped. (presumably
the base station for the Mocom 10s)
In a message dated 6/14/2008 10:31:25 PM Central Daylight Time,
[EMAIL PROTECTED] writes:
Was that used in the low-band Mocom-10?
**Vote for your city's best
Looked around the archives and at the repeater builder website and did
not find docs for the Spectrum 220 repeater. Does anyone have a link
or access to an electronic version?
I'm helping a group get one back on the air.
Thanks
Mike/W5JR
I'm looking for an HP/Agilent front cover that fits the 892x series of
service monitors. I expect one from a similar specan will fit in a pinch.
Thanks
Mike/W5JR
Atlanta, GA local group is looking for a commercial 220 antenna
similar to a Station Master style or DB Products style 4 loop. Please
email me offlist if you have one of the above.
Thanks/W5JR/Milton, GA
Re: Spectrum 224 MHz Repeater docs
Hi Mike,
Send me an email direct and I'll send you free pdf copies of
the Spectrum 224 MHz Repeater gear.
cheers,
skipp
skipp025 at yahoo.com
w_5_jr [EMAIL PROTECTED] wrote:
Looked around the archives and at the repeater builder website and did
26 matches
Mail list logo