If any reader of this list happens to have a clean and complete original
hard paper copy of any of the following LBIs, and is willing to lend it or
them to the RBTIP scanning team for reproduction, please contact me directly
at mycall at verizon dot net. Your original will be returned after
scanni
to bad iam so far from you
i have 4 or 5 high split PA that i dont need.
i would exchange certainly some for an low split vhf
73/s all
gervais ve2ckn
--
From: "terry_wx3m"
Sent: Tuesday, June 15, 2010 6:52 PM
To:
Subject: [Repeater-Builder] Re
You are a genius. Now I can order a crystal.
--- In Repeater-Builder@yahoogroups.com, "countywifi" wrote:
>
> I believe it is a wall mount Royal Exec Station. 118vac, 16-38 watts, 30khz
> spacing, Remote control station, single freq, range 150-174 mhz.
>
> The link too the combo is here..
I believe it is a wall mount Royal Exec Station. 118vac, 16-38 watts, 30khz
spacing, Remote control station, single freq, range 150-174 mhz.
The link too the combo is here..
http://www.repeater-builder.com/ge/product-code-indexes/index-pc63-royal-executive-station-cip.pdf
Operator manual =
I have an orphaned transceiver in a wall mount cabinet. I can't crack the model
number to see where I should start looking for LBI's to tune the thing. It's a
neat package that I would like to use for a remote receiver.
It's a weird animal. Looks to be a late model Mastr Pro
Combo is WK56RAU66
Please email me wx3m.te...@gmail.com
--- In Repeater-Builder@yahoogroups.com, "Randy" wrote:
>
> How do you figure that? Not even close..
>
> --- In Repeater-Builder@yahoogroups.com, "La Rue Communications"
> wrote:
> >
> > This is a UHF.but along the same lines, good for parts. Missing P
I think the OP was looking for the "heat sink assembly" that is used in an
M2 station of the vhf, continuous variety.
In order to put the amp "boards", that the OP has already, into.
;)
Kb0wlf
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf
Wrong link... wrong unit. Sorry!
John Hymes
La Rue Communications
10 S. Aurora Street
Stockton, CA 95202
http://tinyurl.com/2dtngmn
- Original Message -
From: Randy
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, June 15, 2010 2:25 PM
Subject: [Repeater-Builder] Re: MII st
How do you figure that? Not even close..
--- In Repeater-Builder@yahoogroups.com, "La Rue Communications"
wrote:
>
> This is a UHF.but along the same lines, good for parts. Missing PA deck.
>
> http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=320548623705&ssPageName=STRK:MESELX:IT
>
> J
Does anybody have a surplus or used set of the ANT450D3 2 loop UHF Dipole
Antennas laying around they may want to get rid of.
Mike Mullarkey K7PFJ
6886 Sage Ave
Firestone, Co 80504
303-736-9693
This is a UHF.but along the same lines, good for parts. Missing PA deck.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=320548623705&ssPageName=STRK:MESELX:IT
John Hymes
La Rue Communications
10 S. Aurora Street
Stockton, CA 95202
http://tinyurl.com/2dtngmn
- Original Message -
Where are you? I have a bad one in Dayton, OH
Randy
--- In Repeater-Builder@yahoogroups.com, "terry_wx3m" wrote:
>
> Looking for a Mastr II VHF station 75W or up continuous duty PA. I only
> really need the casting, so if you have one with a bad amp, I would take
> that. wx3m.te...@...
>
where are you at?
- Original Message -
From: wescorapci
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, June 15, 2010 11:19 AM
Subject: [Repeater-Builder] Johnson VX power supply.
Anyone have a working EF Johnson Viking power supply they would want to sell?
J
Looking for a Mastr II VHF station 75W or up continuous duty PA. I only really
need the casting, so if you have one with a bad amp, I would take that.
wx3m.te...@gmail.com
Anyone have a working EF Johnson Viking power supply they would want to sell?
Johnson P/N 548-4001-508 Rev 4
wa9ne
T2035.523.C00
now there you have a very good question, as i have never checked the spacing
or even considered it on the Mobiles
i just punch in new channels to check and test.
they are either 12.5 or there 25,
must look as soon as i can get the time
but im sure the conventional side i use heer
Are you looking for 12.5 KHz repeaters?
Cheers
Gareth Bennett
RadioSystems
P.O. Box 5202
Dunedin 9024
New Zealand
- Original Message -
From: x.tait.tech
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, June 15, 2010 9:24 PM
Subject: Re: [Repeater-Builder] Tait T800 Ser
any comments on a possible repeater or price for one
or maybe a couple of T2000-80 kits
Marcus
On 6 June 2010 11:35, x.tait.tech wrote:
> C band to D band, i have 4 trunking system radios T2035's, and decided 4
> conventional channels in each all i need is a repeater one channel will
> su
18 matches
Mail list logo