We had our fill of those here, too. The hot side of the AC line (if you were
lucky, polarized plugs were rare in those days) was connected directly to a
35W4 or some such half wave rectifier tube and later to a selenium half wave
rectifier with the other side of the AC line being connected
Have you tried to resonate it at 27 MHz?
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Ian Wells
Sent: Monday, August 23, 2010 10:50 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Unknowen uvhf antenna
Hi guys
I have had a further look at it today and might have found the reason for
the high swr .The coil didn't seem to be earthing in the braid .When moving
the coax the swr was all over the place .I re crimped the coil under the
coax braid and the swr is now below 1.5:1 on the marine channels .
I've been working on a clubs 223.96Mhz repeater that the receiver lost
sensitivity. It went deaf, so much that the squelch would not even
work. It appears that the plastic variable capacitors in the front end
have gone bad. It was in a very damp water tank environment and this
summer was
Joe,
No help on the caps but felt like commenting on the other part of your post. I
have seen some of the same things. I have had people say that they want to
help with the repeater but if you call they are never available. They always
have some reason why they can't help yet they are the
Try Dans Small Parts and Kits.net
All one word (no spaces)
He seems to have a lot of different trimmers listed.
Ralph,W7HSG
- Original Message -
From: Joe k1ike_m...@snet.net
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, August 24, 2010 8:11:22 AM
Subject: [Repeater-Builder]
The trimmer caps should be easy to find at Jameco, Hamtronics,
Digikey and Mouser. If you have nothing to lose, try a small
amount of Caig Labs DeOxit first.
s.
Joe k1ike_m...@... wrote:
I've been working on a clubs 223.96Mhz repeater that the receiver lost
sensitivity. It went deaf,
I found a phone number for Glenn. I called and left a message offering
web space on the RB site for his 222 maxtrac conversion article.
Hopefully we'll get a positive response.
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Road
Boswell, PA 15531
Mike Morris wrote:
The
Thanks Scott thats info we can NOT lose ...
Rick va3rzs
On Tue, Aug 24, 2010 at 1:29 PM, Scott Zimmerman n3...@repeater-builder.com
wrote:
I found a phone number for Glenn. I called and left a message offering
web space on the RB site for his 222 maxtrac conversion article.
Hopefully
Others experiencing this? The younger hams
just don't seem to have the curiosity that I had years ago.
73, Joe, k1ike
Except for me!!! And I thank this whole group for making it possible.
Ross
www.kc7rjk.net
Hello Ross,
I'm glad to hear that you are interested in repeaters! I hope that
someone in your area elmers you so that the tradition can continue.
Repeaters are a difficult thing to just jump into and the test equipment
that is nice to have can get expensive.
73, Joe, K1ike
On 8/24/2010
We also had a problem with a 454 pager.
Quintron with a 1/4 k amp.
Only one in the metro area had a spur, but that one traveled as the PA cage
changed temperature.
Got a hold of the paging company, and they turned each one off until we saw the
spur go away.
Final tube had been replaced and not
--- In Repeater-Builder@yahoogroups.com, Rodrigo Lima limoidefilho...@...
wrote:
ola a todos alguem teria um esquema simples de uma placa controladora de
repetidora que pudesse controlar dois radios de vhf e mais um link em uhf,
sendo 2 gm300 e um maxtrac da motorola .obrigado
who want to help me with my repeater who light as a cristmas tree but doing
nothing or the micro processor 1 who produce the data, most lines are 'high
and i can not communicate with my programmer ( thats power,busy,tx light up)
here in Brasil is very difficuld (portuguese) and I am Dutch so
http://www.repeater-builder.com/kenwood/pdfs/tkr-820-svc-man-large.pdf
Best Regards,
Chris Carruba
Co-Admin irc.spidernet.org http://www.spidernet.org
CompuTec Data Systems
Custom Written Software,
Networking, Forensic Data Recovery
From: cberende
Zazzle allows you to print custom stamps, anything you'd like to be
customized on a stamp you can have customized on a stamp basically as long
as it's not explicit or vulgur:
If i wanted I could get wedding photos (which is what most people use the
service for), baby pictures, etc...
It is in BY
Ditto!
- Original Message -
From: AARON LEWIS DINKIN
To: Repeater-Builder@yahoogroups.com
Cc: a737dri...@consolidated.net ; candyman194...@yahoo.com ;
juanita_lu...@yahoo.com ; k5...@yahoo.com ; kd5...@classicnet.net ;
ke6...@hotmail.com ; ke6...@yahoo.com ; kqgard...@aol.com
Megga dittos
It's kinda hard to use a computer or a radio when you got a bag on your head .
That' if you still have one!
Subject: Fw: DON'T BUY IT AND DON'T USE IT !!!--READ IT
DON'T BUY IT AND DON'T USE IT!
Apparently they think
that putting hearts and butterflies on the new
18 matches
Mail list logo
