Gordon,
The paperwork I have states the 296/01 is 5 Amps continuous. I am trying to
reproduce the circuit, but it isn't coming out very clear at the moment. I'll
keep trying.
niteviser
--- In Repeater-Builder@yahoogroups.com, Gordon Cooper zl...@... wrote:
Thanks Gareth. I was going
Hi Mike,
I have accumulated a fair bit of knowledge over the years and I can find a
reasonable amount of info, if that is what you are asking. I 'listen in' here
and on the Tait group.
niteviser
--- In Repeater-Builder@yahoogroups.com, Mike Morris wa6i...@... wrote:
I converted it and added
In the Files section Marcus. 296-01 PS as a jpeg. It is all I have on it, but
it was with the 296/11 and /16 circuits, which are slightly different.
niteviser
--- In Repeater-Builder@yahoogroups.com, x.tait.tech x.tait.t...@... wrote:
can i pls have a copy of it, even if need be yousendit.com
are going from -25 or
-26 to -20, just change the components to the -20 values. Yes, they were
defined changes for FCC, according to the book.
niteviser
--- In Repeater-Builder@yahoogroups.com, Ed Yoho w6yj_ya...@... wrote:
Ken Arck wrote:
At 10:10 AM 8/13/2010, Steve wrote:
Hi
either by altering the
voltage or adjusting to get the offset. It is still then 1ppm stable. Can you
tell me which PCB version you have 220-01398-??, I'll she what I have available.
niteviser
--- In Repeater-Builder@yahoogroups.com, Ed Yoho w6yj_ya...@... wrote:
niteviser wrote:
Hi Ed
panel. I will put the
pdf files in the files section. Look for T857 220-01398-02_-04.zip.
Al (niteviser)
--- In Repeater-Builder@yahoogroups.com, Ed Yoho w6yj_ya...@... wrote:
niteviser wrote:
Ed,
The tuning pin is the FM pin of the 12.8MHz module. There were several 12.8
MHz references
. Other IC700's didn't
have that. Let me check again at work today, it 6AM and I am on my way to the
salt mine.
Al
--- In Repeater-Builder@yahoogroups.com, Ed Yoho w6yj_ya...@... wrote:
niteviser wrote:
OK Ed,
I have 2 files showing the PCB details with -26 variant info. They
frequency
on the adjustment alone. Sorry for leading you
astray. I'll have to stop answering Emails at 2AM and get some sleep instead.
Al
--- In Repeater-Builder@yahoogroups.com, Ed Yoho w6yj_ya...@... wrote:
niteviser wrote:
OK Ed,
I have 2 files showing the PCB details with -26 variant info
3.2
N1 1.6
N0 0.800
A5 0.400
A4 0.200
A3 0.100
A2 0.050
A1 0.025
A0 0.0125
niteviser
--- In Repeater-Builder@yahoogroups.com, Floydiboy007 floydi...@... wrote:
Hi all.
This is my first on this group.Better late than never. Is there anyone out
This what you are looking for?
http://www.batlabs.com/svr200.html
niteviser
--- In Repeater-Builder@yahoogroups.com, tait700 cscan...@... wrote:
Hello,
Was wondering if anyone happened to know how the programming cable is wired
for the above pyramid in vehicle repeater ?
Cable has
Marcus,
You're a disposophobic, look up compulsive hoarder in Wikipedia. Don't refer to
my 'collection' of radios, that is a genuine hobby and not any specific medical
or mental condition. Until they come to take me away, Ha Ha..
niteviser
--- In Repeater-Builder@yahoogroups.com
11 matches
Mail list logo