[Repeater-Builder] (unknown)

2010-08-30 Thread Doug Dickinson
The CH751 key is a generic cabinet key used by many manufacturers including Square D, Soundolier, and other non-radio manufacturers. The 2135 and 2553 are pure Motorola, reserved by Chicago Lock (the manufacturer) for only Motorola. The BF-10A key is pure GE as is the GE1000 key. THere are

[Repeater-Builder] RE AGM batteries

2010-08-09 Thread Doug Dickinson
Just to clarify what was said before about AGM batteries, when an AGM battery vents, it's because something is wrong. Either it was charged too fast or discharged too fast or it is in a condition called thermal runaway, which occurs when a battery is overheated. In an ordinary scenario, it is

[Repeater-Builder] Re: Repeaters for CERT Use?

2009-01-11 Thread Doug Dickinson
border zone (north of line A). If you are a unit of the local government, then you need to have that local government agency apply for the channel you use. Who is the sponsoring entity? In any case, get with me off-line and I will be happy to point you in the right direction for licensing. Doug

[Repeater-Builder] Re: OT: Radios and Coms in TV and Movies

2008-12-30 Thread Doug Dickinson
east they have over 6 feet in the mountains. I could use some sun for a while! Doug Dickinson KC0SDQ

[Repeater-Builder] Re: OT: Radios and Coms in TV and Movies

2008-12-23 Thread Doug Dickinson
There were two basic repeat modes used in the Medical Telemetry systems. The Med 1 through 8 and the two dispatch channels (now known as Med 9 and 10) are duplex channels. The Orange Box and the Apcor (both Motorola) and some others were duplex hand carried units. I will focus first on the

[Repeater-Builder] Re: OT: Radios and Coms in TV and Movies

2008-12-22 Thread Doug Dickinson
I do remember a little about the radios they used on the series. The Orange Box duplex paramedic radio was the original Motorola adventure into the medical telemetry function. It consisted of (all inside the orange box case) an HT220 used as an exciter, and a PA out of a micor mobile low power

[Repeater-Builder] Re: OT: Radios and Coms in TV and Movies

2008-12-22 Thread Doug Dickinson
I do remember a little about the radios they used on the series. The Orange Box duplex radio was the original Motorola adventure into the medical telemetry function. It consisted of an HT220 used as an exciter, and a PA out of a micor mobile low power unit. The receiver was straight out of the

[Repeater-Builder] Re: Unknow Radio - Anyone can help?

2008-08-03 Thread Doug Dickinson
That appears to be a Mocom 70 dash mount radio. They did manufacture some and they were often found in things like Cement Trucks and other large heavy machinery with space to put a big radio up front. They had to have everything torqued down inside very tightly as the shaking in that

[Repeater-Builder] Re: So I watched it NBC Dateline story on Tower Climbers

2008-07-23 Thread Doug Dickinson
I too saw the show and a couple of comments:   1) Hard Hats are required by OSHA - no way around that. 2) $14/hr is common for non-union climbers. Double that for Union. Also, these small contractors (and most of them are ) do not provide health insurance and often they don't even keep up with

[Repeater-Builder] Re: Stop the Madness

2007-12-28 Thread Doug Dickinson
I still don't understand why people object to two repeaters - properly designed - cannot share the same channel? With separate PL tones and limited hand time, they can complement each other. The use of a coordinator that assigns a channel based on antiquated criteria is still providing

[Repeater-Builder] Re: UHF Radio recommendations ??

2007-11-05 Thread Doug Dickinson
I like the idea of using some of the old brick outhouse type radios. The MasterII and Micor are about as bulletproof as a radio can get. Another idea that I saw on the web is to use a couple of portable radios (i.e. MT1000 or P200 Motorola) radios as the Receiver and the exciter and then

[Repeater-Builder] Re:Motorola repeaters

2007-02-08 Thread Doug Dickinson
I vote for doing either - whatever works for you! The Micos is a fine radio - no doubt. It is also a very old radio. The only way to get parts is to scrap an old micor. Just about the same for the SRA series syntor. Both have mechanical frontends and can do a great job, but the syntors DO require

[Repeater-Builder] Re: MICOR BASE OR REPEATER ON BATTERIES?

2007-01-30 Thread Doug Dickinson
You CAN run a Micor base station on 12VDC, but you have to arrange a switchover from the 12V supply to the regulator board in the Micor power supply. As was said, you need 9.7 or so volts to run much of the control and logic functions and the power supply derives that from 12V. You need to make

[Repeater-Builder] Re: Battery backup

2007-01-11 Thread Doug Dickinson
Try this link: http://www.westmountainradio.com/SuperPWRgate.htm Doug

[Repeater-Builder] Re: Battery backup

2007-01-10 Thread Doug Dickinson
The best arrangement I have seen so far is the Powergate PW40S which has the built-in 3 stage charger. I have used them and they are really good with a zero time switchover so none of the little electrons in the controller get confused and reset or worse, lockup the controller. It also charges

[Repeater-Builder] Re: FYI: FCc officially issues RO dropping code requirement today

2006-12-18 Thread Doug Dickinson
You know, there is no requirement to kil code from the airways. Some people are talking like this is the end of things. NOTHING says there won't be any more code, it is just relegated to the other obsolete and dusty vestages of the amateur radio world. I know there are a lot of folks that enjoy