Just for starters you will get to change the coils in the RF Deck. Now that
means desassembling the deck. There are other changes in the IF section also. I
would forget this project and find a Range I UHF Mitrek. There were quite a few
built for the FEDS but they would be rare now...Jim
I had one in my hands last week at a Hamfest in Gainsville, Texas. They are
quite impressive. I have a strong hunch they are throw-away in nature when
they die. Time will tell. If I needed a dual bander for ham use, I would give
one a try.
Jim WB4GWX/AAV6UX
Let's move on Please!
Thank you...
Have you checked the repeater for desense without the antenna installed? As in
most commercial repeaters they are usually designed for larger spacing than 600
kHz. Check it without the antenna and all open ports terminated with a 50 ohm
termination. Then add the antenna and look at the
MFJ make one, check their catalog...
Mine is is a lot cleaner. I also have the 38A, and the CommSpec TP3200...Jim
--- On Sat, 9/6/08, Laryn Lohman [EMAIL PROTECTED] wrote:
From: Laryn Lohman [EMAIL PROTECTED]
Subject: [Repeater-Builder] Re: I have the install manual for a Zetron Model 48
to upload! How?
To:
6 matches
Mail list logo
